public inbox for linux-phy@lists.infradead.org
 help / color / mirror / Atom feed
From: Vidya Sagar <vidyas@nvidia.com>
To: <lpieralisi@kernel.org>, <robh@kernel.org>, <kw@linux.com>,
	<bhelgaas@google.com>, <thierry.reding@gmail.com>,
	<jonathanh@nvidia.com>, <kishon@ti.com>, <vkoul@kernel.org>,
	<mani@kernel.org>, <Sergey.Semin@baikalelectronics.ru>,
	<ffclaire1224@gmail.com>
Cc: <linux-pci@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-phy@lists.infradead.org>,
	<kthota@nvidia.com>, <mmaddireddy@nvidia.com>,
	<vidyas@nvidia.com>, <sagar.tv@gmail.com>
Subject: [PATCH V3 16/21] PCI: tegra194: Set LTR message request before PCIe link up
Date: Fri, 14 Oct 2022 00:08:49 +0530	[thread overview]
Message-ID: <20221013183854.21087-17-vidyas@nvidia.com> (raw)
In-Reply-To: <20221013183854.21087-1-vidyas@nvidia.com>

LTR message should be sent as soon as the root port enables LTR in the
endpoint. Set snoop & no snoop LTR timing and LTR message request before
PCIe links up. This ensures that LTR message is sent upstream as soon as
LTR is enabled.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
---
V3:
* This is a new patch in this series

 drivers/pci/controller/dwc/pcie-tegra194.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index d592cf68b02c..23ca97401339 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -493,11 +493,6 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
 	if (val & PCI_COMMAND_MASTER) {
 		ktime_t timeout;
 
-		/* 110us for both snoop and no-snoop */
-		val = 110 | (2 << PCI_LTR_SCALE_SHIFT) | LTR_MSG_REQ;
-		val |= (val << LTR_MST_NO_SNOOP_SHIFT);
-		appl_writel(pcie, val, APPL_LTR_MSG_1);
-
 		/* Send LTR upstream */
 		val = appl_readl(pcie, APPL_LTR_MSG_2);
 		val |= APPL_LTR_MSG_2_LTR_MSG_REQ_STATE;
@@ -1951,6 +1946,11 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
 	val |= APPL_INTR_EN_L1_8_EDMA_INT_EN;
 	appl_writel(pcie, val, APPL_INTR_EN_L1_8_0);
 
+	/* 110us for both snoop and no-snoop */
+	val = 110 | (2 << PCI_LTR_SCALE_SHIFT) | LTR_MSG_REQ;
+	val |= (val << LTR_MST_NO_SNOOP_SHIFT);
+	appl_writel(pcie, val, APPL_LTR_MSG_1);
+
 	reset_control_deassert(pcie->core_rst);
 
 	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
-- 
2.17.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2022-10-13 18:41 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-13 18:38 [PATCH V3 00/21] Enhancements to pcie-tegra194 driver Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 01/21] PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select" Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 02/21] PCI: tegra194: Drive CLKREQ signal low explicitly Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 03/21] PCI: tegra194: Fix polling delay for L2 state Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 04/21] PCI: tegra194: Handle errors in BPMP response Vidya Sagar
2023-01-13 15:15   ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 05/21] PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 06/21] PCI: tegra194: Refactor LTSSM state polling on surprise down Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 07/21] PCI: tegra194: Disable direct speed change for EP Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 08/21] phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration Vidya Sagar
2022-10-28 11:42   ` Vinod Koul
2022-10-28 11:49     ` Vidya Sagar
2022-10-28 12:13   ` Vinod Koul
2022-10-13 18:38 ` [PATCH V3 09/21] PCI: tegra194: Calibrate P2U for endpoint mode Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 10/21] PCI: tegra194: Free resources during controller deinitialization Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 11/21] PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration Vidya Sagar
2022-11-14 11:56   ` Lorenzo Pieralisi
2023-01-13 15:21   ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 12/21] PCI: tegra194: Enable DMA interrupt Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 13/21] PCI: tegra194: Enable hardware hot reset mode in Endpoint Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 14/21] PCI: tegra194: Allow system suspend when the Endpoint link is not up Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 15/21] PCI: tegra194: Disable L1.2 capability of Tegra234 EP Vidya Sagar
2022-10-13 18:38 ` Vidya Sagar [this message]
2022-10-13 18:38 ` [PATCH V3 17/21] PCI: tegra194: Reduce AXI slave timeout value Vidya Sagar
2023-01-13 15:31   ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 18/21] PCI: tegra194: Don't force the device into the D0 state before L2 Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 19/21] PCI: tegra194: Free up EP resources during remove() Vidya Sagar
2023-01-13 15:28   ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 20/21] dt-bindings: PCI: tegra194: Add monitor clock support Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 21/21] PCI: tegra194: Add core " Vidya Sagar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221013183854.21087-17-vidyas@nvidia.com \
    --to=vidyas@nvidia.com \
    --cc=Sergey.Semin@baikalelectronics.ru \
    --cc=bhelgaas@google.com \
    --cc=ffclaire1224@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=kthota@nvidia.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=mmaddireddy@nvidia.com \
    --cc=robh@kernel.org \
    --cc=sagar.tv@gmail.com \
    --cc=thierry.reding@gmail.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox