From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: linux-phy@lists.infradead.org
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Josua Mayer <josua@solid-run.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 phy 14/16] phy: lynx-28g: improve lynx_28g_probe() sequence
Date: Mon, 10 Nov 2025 11:22:39 +0200 [thread overview]
Message-ID: <20251110092241.1306838-15-vladimir.oltean@nxp.com> (raw)
In-Reply-To: <20251110092241.1306838-1-vladimir.oltean@nxp.com>
dev_set_drvdata() is called twice, it is sufficient to do it only once.
devm_of_phy_provider_register() can fail, and if it does, the
&priv->cdr_check work item is queued, but not cancelled, and the device
probing failed, so it will trigger use after free. This is a minor risk
though.
Resource initialization should be done a little earlier, in case we need
to dereference dev_get_drvdata() in lynx_28g_pll_read_configuration() or
in lynx_28g_lane_read_configuration().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v3->v4: slight context change due to the introduction of
lynx_28g_probe_lane()
v2->v3: none
v1->v2: patch is new
drivers/phy/freescale/phy-fsl-lynx-28g.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/freescale/phy-fsl-lynx-28g.c b/drivers/phy/freescale/phy-fsl-lynx-28g.c
index 5d5c94295726..649c5c2fa4ad 100644
--- a/drivers/phy/freescale/phy-fsl-lynx-28g.c
+++ b/drivers/phy/freescale/phy-fsl-lynx-28g.c
@@ -1165,7 +1165,11 @@ static int lynx_28g_probe(struct platform_device *pdev)
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+
priv->dev = dev;
+ dev_set_drvdata(dev, priv);
+ spin_lock_init(&priv->pcc_lock);
+ INIT_DELAYED_WORK(&priv->cdr_check, lynx_28g_cdr_lock_check);
priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base))
@@ -1210,18 +1214,14 @@ static int lynx_28g_probe(struct platform_device *pdev)
}
}
- dev_set_drvdata(dev, priv);
-
- spin_lock_init(&priv->pcc_lock);
- INIT_DELAYED_WORK(&priv->cdr_check, lynx_28g_cdr_lock_check);
+ provider = devm_of_phy_provider_register(dev, lynx_28g_xlate);
+ if (IS_ERR(provider))
+ return PTR_ERR(provider);
queue_delayed_work(system_power_efficient_wq, &priv->cdr_check,
msecs_to_jiffies(1000));
- dev_set_drvdata(dev, priv);
- provider = devm_of_phy_provider_register(dev, lynx_28g_xlate);
-
- return PTR_ERR_OR_ZERO(provider);
+ return 0;
}
static void lynx_28g_remove(struct platform_device *pdev)
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2025-11-10 9:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-10 9:22 [PATCH v4 phy 00/16] Lynx 28G improvements part 1 Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 01/16] dt-bindings: phy: lynx-28g: permit lane OF PHY providers Vladimir Oltean
2025-11-12 16:20 ` Rob Herring (Arm)
2025-11-13 16:46 ` Vinod Koul
2025-11-13 16:54 ` Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 02/16] phy: lynx-28g: refactor lane probing to lynx_28g_probe_lane() Vladimir Oltean
2025-11-13 16:49 ` Vinod Koul
2025-11-13 16:56 ` Vladimir Oltean
2025-11-17 18:57 ` Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 03/16] phy: lynx-28g: support individual lanes as OF PHY providers Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 04/16] phy: lynx-28g: remove LYNX_28G_ prefix from register names Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 05/16] phy: lynx-28g: don't concatenate lynx_28g_lane_rmw() argument "reg" with "val" and "mask" Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 06/16] phy: lynx-28g: use FIELD_GET() and FIELD_PREP() Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 07/16] phy: lynx-28g: convert iowrite32() calls with magic values to macros Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 08/16] phy: lynx-28g: restructure protocol configuration register accesses Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 09/16] phy: lynx-28g: make lynx_28g_set_lane_mode() more systematic Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 10/16] phy: lynx-28g: refactor lane->interface to lane->mode Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 11/16] phy: lynx-28g: distinguish between 10GBASE-R and USXGMII Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 12/16] phy: lynx-28g: configure more equalization params for 1GbE and 10GbE Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 13/16] phy: lynx-28g: use "dev" argument more in lynx_28g_probe() Vladimir Oltean
2025-11-10 9:22 ` Vladimir Oltean [this message]
2025-11-10 9:22 ` [PATCH v4 phy 15/16] dt-bindings: phy: lynx-28g: add compatible strings per SerDes and instantiation Vladimir Oltean
2025-11-10 10:29 ` Rob Herring (Arm)
2025-11-10 11:58 ` Vladimir Oltean
2025-11-10 9:22 ` [PATCH v4 phy 16/16] phy: lynx-28g: probe on per-SoC and per-instance compatible strings Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251110092241.1306838-15-vladimir.oltean@nxp.com \
--to=vladimir.oltean@nxp.com \
--cc=ioana.ciornei@nxp.com \
--cc=josua@solid-run.com \
--cc=kishon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox