[PATCH] phy: qcom-qmp-ufs: Fix kaanapali PHY PLL lock failure after SM8650 G4 fix

From: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
To: vkoul@kernel.org, neil.armstrong@linaro.org,
	konrad.dybcio@oss.qualcomm.com,
	dmitry.baryshkov@oss.qualcomm.com, mani@kernel.org,
	abel.vesa@oss.qualcomm.com
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Nitin Rawat <nitin.rawat@oss.qualcomm.com>,
	stable@vger.kernel.org
Subject: [PATCH] phy: qcom-qmp-ufs: Fix kaanapali PHY PLL lock failure after SM8650 G4 fix
Date: Wed, 15 Apr 2026 16:18:51 +0530	[thread overview]
Message-ID: <20260415104851.2763238-1-nitin.rawat@oss.qualcomm.com> (raw)

Commit 81af9e40e2e4 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4")
moved QPHY_V6_PCS_UFS_PLL_CNTL register configuration from the shared
sm8650_ufsphy_g5_pcs table to the SM8650-specific sm8650_ufsphy_pcs base
table to fix Gear 4 operation on SM8650.

However, this change inadvertently broke kaanapali and SM8750 SoCs
which also rely on the shared sm8650_ufsphy_g5_pcs table for Gear 5
configuration but use their own sm8750_ufsphy_pcs base table. After the
change, kaanapali PHYs are left without the required PLL_CNTL = 0x33
setting, causing the PHY PLL to remain at its hardware reset default
value, preventing PLL lock and resulting in DME_LINKSTARTUP timeouts.

Fix this by adding the missing QPHY_V6_PCS_UFS_PLL_CNTL = 0x33 entry
to the sm8750_ufsphy_pcs table, mirroring what the original commit
already did for sm8650_ufsphy_pcs.

Cc: stable@vger.kernel.org # v6.19.12
Fixes: 81af9e40e2e4 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4")
Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 771bc7c2ab50..b87314c8379d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -1112,6 +1112,7 @@ static const struct qmp_phy_init_tbl sm8750_ufsphy_pcs[] = {
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PCS_CTRL1, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33),
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x68),
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S4, 0x0e),
--
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
