Linux-PHY Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Sushrut Shree Trivedi <sushrut.trivedi@oss.qualcomm.com>
To: "Vinod Koul" <vkoul@kernel.org>,
	"Neil Armstrong" <neil.armstrong@linaro.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
	"Manivannan Sadhasivam" <mani@kernel.org>,
	"Bjorn Andersson" <andersson@kernel.org>,
	"Chaitanya Chundru" <krishna.chundru@oss.qualcomm.com>,
	"Bartosz Golaszewski" <brgl@kernel.org>,
	"Konrad Dybcio" <konradybcio@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pci@vger.kernel.org,
	Sushrut Shree Trivedi <sushrut.trivedi@oss.qualcomm.com>
Subject: [PATCH 5/9] phy: qcom: qmp-pcie: Add QMP PCIe PHY support for Shikra
Date: Wed, 01 Jul 2026 00:32:47 +0530	[thread overview]
Message-ID: <20260701-shikra-upstream-v1-5-e1a721eb8943@oss.qualcomm.com> (raw)
In-Reply-To: <20260701-shikra-upstream-v1-0-e1a721eb8943@oss.qualcomm.com>

Add QMP PCIe PHY Gen2x1 support.

Signed-off-by: Sushrut Shree Trivedi <sushrut.trivedi@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 73 ++++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index d3effad7a074..e0995e4d5f2d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -2172,6 +2172,50 @@ static const struct qmp_phy_init_tbl sdx65_qmp_pcie_pcs_lane1_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
 };
 
+static const struct qmp_phy_init_tbl shikra_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_CLK_ENABLE1, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_BG_TRIM, 0xf),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_LOCK_CMP_EN, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_VCO_TUNE_MAP, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_VCO_TUNE_TIMER1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_VCO_TUNE_TIMER2, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_CMN_CONFIG, 0x6),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_PLL_IVCO, 0xf),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_HSCLK_SEL, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_SVS_MODE_CLK_SEL, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_CORE_CLK_EN, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_CORECLK_DIV, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_BG_TIMER, 0x9),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_SYSCLK_EN_SEL, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_DIV_FRAC_START3_MODE0, 0x3),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_LOCK_CMP3_MODE0, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_LOCK_CMP2_MODE0, 0xd),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_LOCK_CMP1_MODE0, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_CLK_SELECT, 0x35),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_SYS_CLK_CTRL, 0x2),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_SYSCLK_BUF_ENABLE, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_CP_CTRL_MODE0, 0x4),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_PLL_CCTRL_MODE0, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_BG_TIMER, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_SSC_EN_CENTER, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_SSC_PER2, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_SSC_ADJ_PER1, 0x2),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_SSC_ADJ_PER2, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_SSC_STEP_SIZE1, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_SSC_STEP_SIZE2, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_V2_COM_CLK_EP_DIV, 0x19),
+};
+
 static const struct qmp_phy_init_tbl sm8450_qmp_gen3_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
@@ -3911,6 +3955,32 @@ static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
 	.phy_status		= PHYSTATUS,
 };
 
+static const struct qmp_phy_cfg shikra_pciephy_cfg = {
+	.lanes			= 1,
+
+	.offsets		= &qmp_pcie_offsets_v2,
+
+	.tbls = {
+		.serdes		= shikra_pcie_serdes_tbl,
+		.serdes_num	= ARRAY_SIZE(shikra_pcie_serdes_tbl),
+		.tx		= qcs615_pcie_tx_tbl,
+		.tx_num		= ARRAY_SIZE(qcs615_pcie_tx_tbl),
+		.rx		= qcs615_pcie_rx_tbl,
+		.rx_num		= ARRAY_SIZE(qcs615_pcie_rx_tbl),
+		.pcs		= qcs615_pcie_pcs_tbl,
+		.pcs_num	= ARRAY_SIZE(qcs615_pcie_pcs_tbl),
+	},
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= pciephy_v2_regs_layout,
+
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.phy_status		= PHYSTATUS,
+};
+
+
 static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
 	.lanes			= 1,
 
@@ -5603,6 +5673,9 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sdx65-qmp-gen4x2-pcie-phy",
 		.data = &sdx65_qmp_pciephy_cfg,
+	}, {
+		.compatible = "qcom,shikra-qmp-gen2x1-pcie-phy",
+		.data = &shikra_pciephy_cfg,
 	}, {
 		.compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy",
 		.data = &sm8250_qmp_gen3x1_pciephy_cfg,

-- 
2.43.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2026-06-30 19:03 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-30 19:02 [PATCH 0/9] PCI: qcom: Add PCIe support for Shikra SoC Sushrut Shree Trivedi
2026-06-30 19:02 ` [PATCH 1/9] dt-bindings: phy: sc8280xp-qmp-pcie: Document Shikra PCIe phy Sushrut Shree Trivedi
2026-07-01  9:50   ` Bartosz Golaszewski
2026-06-30 19:02 ` [PATCH 2/9] dt-bindings: PCI: qcom: Document the Shikra PCIe Controller Sushrut Shree Trivedi
2026-06-30 19:18   ` Bjorn Helgaas
2026-06-30 20:35   ` Rob Herring (Arm)
2026-07-07  5:41     ` Sushrut Shree Trivedi
2026-07-01  6:26   ` Krzysztof Kozlowski
2026-07-07  5:29     ` Sushrut Shree Trivedi
2026-07-07  6:01   ` Manivannan Sadhasivam
2026-06-30 19:02 ` [PATCH 3/9] dt-bindings: PCI: Add bindings for endpoint gpios Sushrut Shree Trivedi
2026-06-30 19:22   ` Bjorn Helgaas
2026-07-07  5:39     ` Sushrut Shree Trivedi
2026-06-30 20:35   ` Rob Herring (Arm)
2026-07-07  5:42     ` Sushrut Shree Trivedi
2026-07-01  6:27   ` Krzysztof Kozlowski
2026-07-07  5:26     ` Sushrut Shree Trivedi
2026-07-07  6:48   ` Manivannan Sadhasivam
2026-06-30 19:02 ` [PATCH 4/9] PCI: qcom: Add support for Shikra Sushrut Shree Trivedi
2026-07-01  9:51   ` Bartosz Golaszewski
2026-06-30 19:02 ` Sushrut Shree Trivedi [this message]
2026-06-30 19:02 ` [PATCH 6/9] PCI/pwrctrl: tc9563: Add API to control endpoint power and reset Sushrut Shree Trivedi
2026-06-30 19:28   ` Bjorn Helgaas
2026-07-07  5:40     ` Sushrut Shree Trivedi
2026-06-30 19:02 ` [PATCH 7/9] arm64: dts: qcom: shikra: Add PCIe PHY and controller nodes Sushrut Shree Trivedi
2026-06-30 19:29   ` Bjorn Helgaas
2026-07-07  5:40     ` Sushrut Shree Trivedi
2026-07-01 10:34   ` Konrad Dybcio
2026-07-07  5:23     ` Sushrut Shree Trivedi
2026-06-30 19:02 ` [PATCH 8/9] arm64: dts: qcom: shikra-evk: Add TC9563 PCIe switch node for PCIe Sushrut Shree Trivedi
2026-06-30 19:30   ` Bjorn Helgaas
2026-07-07  5:41     ` Sushrut Shree Trivedi
2026-07-01 10:35   ` Konrad Dybcio
2026-07-07  5:22     ` Sushrut Shree Trivedi
2026-06-30 19:02 ` [PATCH 9/9] arm64: dts: qcom: shikra-(cqm/cqs/iqs)-evk: Enable PCIe PHY node Sushrut Shree Trivedi
2026-07-01 10:36   ` Konrad Dybcio
2026-07-07  5:21     ` Sushrut Shree Trivedi
2026-07-08  8:02 ` [PATCH 0/9] PCI: qcom: Add PCIe support for Shikra SoC Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260701-shikra-upstream-v1-5-e1a721eb8943@oss.qualcomm.com \
    --to=sushrut.trivedi@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=brgl@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krishna.chundru@oss.qualcomm.com \
    --cc=krzk+dt@kernel.org \
    --cc=kwilczynski@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox