[PATCH linux-next 0/5] Use dev_err_probe() in phy

[PATCH linux-next 0/5] Use dev_err_probe() in phy

[shao.mingyin]

From: Zhang Enpei <zhang.enpei@zte.com.cn>

Use dev_err_probe() to simplify the following code
sequence:
  if (err != -EPROBE_DEFER)
      dev_err(dev, ...);
  else
      dev_dbg(dev, ...);
  return err;

Zhang Enpei (5):
  phy: allwinner: phy-sun50i-usb3: Use dev_err_probe()
  phy: broadcom: phy-bcm63xx-usbh: Use dev_err_probe()
  phy: qualcomm: phy-qcom-ipq4019-usb: Use dev_err_probe()
  phy: lantiq: phy-lantiq-rcu-usb2: Use dev_err_probe()
  phy: rockchip: phy-rockchip-typec: Use dev_err_probe()

 drivers/phy/allwinner/phy-sun50i-usb3.c     | 8 +++-----
 drivers/phy/broadcom/phy-bcm63xx-usbh.c     | 8 +++-----
 drivers/phy/lantiq/phy-lantiq-rcu-usb2.c    | 8 +++-----
 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 8 +++-----
 drivers/phy/rockchip/phy-rockchip-typec.c   | 8 +++-----
 5 files changed, 15 insertions(+), 25 deletions(-)

-- 
2.25.1

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH linux-next 1/5] phy: allwinner: phy-sun50i-usb3: Use dev_err_probe()

[shao.mingyin]

From: Zhang Enpei <zhang.enpei@zte.com.cn>

Replace the open-code with dev_err_probe() to simplify the code.

Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
---
 drivers/phy/allwinner/phy-sun50i-usb3.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun50i-usb3.c b/drivers/phy/allwinner/phy-sun50i-usb3.c
index 363f9a0df503..b03faffc160d 100644
--- a/drivers/phy/allwinner/phy-sun50i-usb3.c
+++ b/drivers/phy/allwinner/phy-sun50i-usb3.c
@@ -141,11 +141,9 @@ static int sun50i_usb3_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;

 	phy->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(phy->clk)) {
-		if (PTR_ERR(phy->clk) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get phy clock\n");
-		return PTR_ERR(phy->clk);
-	}
+	if (IS_ERR(phy->clk))
+		return dev_err_probe(dev, PTR_ERR(phy->clk),
+				     "failed to get phy clock\n");

 	phy->reset = devm_reset_control_get(dev, NULL);
 	if (IS_ERR(phy->reset)) {
-- 
2.25.1

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH linux-next 1/5] phy: allwinner: phy-sun50i-usb3: Use dev_err_probe()

[Jernej Škrabec]

Dne sreda, 2. april 2025 ob 13:42:03 Srednjeevropski poletni čas je shao.mingyin@zte.com.cn napisal(a):
> From: Zhang Enpei <zhang.enpei@zte.com.cn>
> 
> Replace the open-code with dev_err_probe() to simplify the code.
> 
> Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
> Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> ---
>  drivers/phy/allwinner/phy-sun50i-usb3.c | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/phy/allwinner/phy-sun50i-usb3.c b/drivers/phy/allwinner/phy-sun50i-usb3.c
> index 363f9a0df503..b03faffc160d 100644
> --- a/drivers/phy/allwinner/phy-sun50i-usb3.c
> +++ b/drivers/phy/allwinner/phy-sun50i-usb3.c
> @@ -141,11 +141,9 @@ static int sun50i_usb3_phy_probe(struct platform_device *pdev)
>  		return -ENOMEM;
> 
>  	phy->clk = devm_clk_get(dev, NULL);
> -	if (IS_ERR(phy->clk)) {
> -		if (PTR_ERR(phy->clk) != -EPROBE_DEFER)
> -			dev_err(dev, "failed to get phy clock\n");
> -		return PTR_ERR(phy->clk);
> -	}
> +	if (IS_ERR(phy->clk))
> +		return dev_err_probe(dev, PTR_ERR(phy->clk),
> +				     "failed to get phy clock\n");
> 
>  	phy->reset = devm_reset_control_get(dev, NULL);
>  	if (IS_ERR(phy->reset)) {
> 





-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH linux-next 2/5] phy: broadcom: phy-bcm63xx-usbh: Use dev_err_probe()

[shao.mingyin]

From: Zhang Enpei <zhang.enpei@zte.com.cn>

Replace the open-code with dev_err_probe() to simplify the code.

Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
---
 drivers/phy/broadcom/phy-bcm63xx-usbh.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/broadcom/phy-bcm63xx-usbh.c b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
index 647644de041b..b9e7f750567c 100644
--- a/drivers/phy/broadcom/phy-bcm63xx-usbh.c
+++ b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
@@ -397,11 +397,9 @@ static int __init bcm63xx_usbh_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(usbh->base);

 	usbh->reset = devm_reset_control_get_exclusive(dev, NULL);
-	if (IS_ERR(usbh->reset)) {
-		if (PTR_ERR(usbh->reset) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get reset\n");
-		return PTR_ERR(usbh->reset);
-	}
+	if (IS_ERR(usbh->reset))
+		return dev_err_probe(dev, PTR_ERR(usbh->reset),
+				     "failed to get reset\n");

 	usbh->usbh_clk = devm_clk_get_optional(dev, "usbh");
 	if (IS_ERR(usbh->usbh_clk))
-- 
2.25.1

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH linux-next 3/5] phy: qualcomm: phy-qcom-ipq4019-usb: Use dev_err_probe()

[shao.mingyin]

From: Zhang Enpei <zhang.enpei@zte.com.cn>

Replace the open-code with dev_err_probe() to simplify the code.

Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
---
 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
index da6f290af722..738b3015747f 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
@@ -109,11 +109,9 @@ static int ipq4019_usb_phy_probe(struct platform_device *pdev)
 	}

 	phy->por_rst = devm_reset_control_get(phy->dev, "por_rst");
-	if (IS_ERR(phy->por_rst)) {
-		if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER)
-			dev_err(dev, "POR reset is missing\n");
-		return PTR_ERR(phy->por_rst);
-	}
+	if (IS_ERR(phy->por_rst))
+		return dev_err_probe(dev, PTR_ERR(phy->por_rst),
+				     "POR reset is missing\n");

 	phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst");
 	if (IS_ERR(phy->srif_rst))
-- 
2.25.1

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH linux-next 3/5] phy: qualcomm: phy-qcom-ipq4019-usb: Use dev_err_probe()

[Dmitry Baryshkov]

On Wed, Apr 02, 2025 at 07:43:57PM +0800, shao.mingyin@zte.com.cn wrote:
> From: Zhang Enpei <zhang.enpei@zte.com.cn>
> 
> Replace the open-code with dev_err_probe() to simplify the code.
> 
> Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
> Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
> ---
>  drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

-- 
With best wishes
Dmitry

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH linux-next 4/5] phy: lantiq: phy-lantiq-rcu-usb2: Use dev_err_probe()

[shao.mingyin]

From: Zhang Enpei <zhang.enpei@zte.com.cn>

Replace the open-code with dev_err_probe() to simplify the code.

Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
---
 drivers/phy/lantiq/phy-lantiq-rcu-usb2.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
index 82f1ffc0b0ad..7e4e42d62dbc 100644
--- a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
+++ b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
@@ -192,11 +192,9 @@ static int ltq_rcu_usb2_of_parse(struct ltq_rcu_usb2_priv *priv,
 	}

 	priv->ctrl_reset = devm_reset_control_get_shared(dev, "ctrl");
-	if (IS_ERR(priv->ctrl_reset)) {
-		if (PTR_ERR(priv->ctrl_reset) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get 'ctrl' reset\n");
-		return PTR_ERR(priv->ctrl_reset);
-	}
+	if (IS_ERR(priv->ctrl_reset))
+		return dev_err_probe(dev, PTR_ERR(priv->ctrl_reset),
+				     "failed to get 'ctrl' reset\n");

 	priv->phy_reset = devm_reset_control_get_optional(dev, "phy");

-- 
2.25.1

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH linux-next 5/5] phy: rockchip: phy-rockchip-typec: Use dev_err_probe()

[shao.mingyin]

From: Zhang Enpei <zhang.enpei@zte.com.cn>

Replace the open-code with dev_err_probe() to simplify the code.

Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
---
 drivers/phy/rockchip/phy-rockchip-typec.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index d9701b6106d5..94d1e6ead1a7 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -1151,11 +1151,9 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(tcphy->extcon)) {
 		if (PTR_ERR(tcphy->extcon) == -ENODEV) {
 			tcphy->extcon = NULL;
-		} else {
-			if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
-				dev_err(dev, "Invalid or missing extcon\n");
-			return PTR_ERR(tcphy->extcon);
-		}
+		} else
+			return dev_err_probe(dev, PTR_ERR(tcphy->extcon),
+					     "Invalid or missing extcon\n");
 	}

 	pm_runtime_enable(dev);
-- 
2.25.1

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH linux-next 5/5] phy: rockchip: phy-rockchip-typec: Use dev_err_probe()

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 1566 bytes --]

Hi,

On Wed, Apr 02, 2025 at 07:45:42PM +0800, shao.mingyin@zte.com.cn wrote:
> From: Zhang Enpei <zhang.enpei@zte.com.cn>
> 
> Replace the open-code with dev_err_probe() to simplify the code.
> 
> Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
> Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
> ---
>  drivers/phy/rockchip/phy-rockchip-typec.c | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
> index d9701b6106d5..94d1e6ead1a7 100644
> --- a/drivers/phy/rockchip/phy-rockchip-typec.c
> +++ b/drivers/phy/rockchip/phy-rockchip-typec.c
> @@ -1151,11 +1151,9 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
>  	if (IS_ERR(tcphy->extcon)) {
>  		if (PTR_ERR(tcphy->extcon) == -ENODEV) {
>  			tcphy->extcon = NULL;
> -		} else {
> -			if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
> -				dev_err(dev, "Invalid or missing extcon\n");
> -			return PTR_ERR(tcphy->extcon);
> -		}
> +		} else
> +			return dev_err_probe(dev, PTR_ERR(tcphy->extcon),
> +					     "Invalid or missing extcon\n");

You should also remove the { } for the normal if clause. Otherwise

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>

But you might want to throw in an extra patch updating the error
message. -ENODEV is covered explicitly, so it's not "missing". I
suggest "Failed to get extcon".

Greetings,

-- Sebastian

>  	}
> 
>  	pm_runtime_enable(dev);
> -- 
> 2.25.1
> 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 112 bytes --]

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy