[PATCH 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible

[PATCH 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible

[Luca Weiss]

Add the compatible describing the combo phy found on SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
index 97a7ecafbf85..68aecb638870 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -18,6 +18,7 @@ properties:
       - qcom,sc8180x-qmp-usb3-dp-phy
       - qcom,sc8280xp-qmp-usb43dp-phy
       - qcom,sdm845-qmp-usb3-dp-phy
+      - qcom,sm6350-qmp-usb3-dp-phy
       - qcom,sm8250-qmp-usb3-dp-phy
   reg:
     items:
-- 
2.38.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH 2/3] phy: qcom-qmp-combo: Add config for SM6350

[Luca Weiss]

Add the tables and config for the combo phy found on SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 98 +++++++++++++++++++++++
 1 file changed, 98 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index ba9d761ec49a..c93867da7b1a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -325,6 +325,66 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
 };
 
+static const struct qmp_phy_init_tbl sm6350_usb3_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl sm6350_usb3_pcs_tbl[] = {
+	/* FLL settings */
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+	/* Lock Det settings */
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xcc),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
 static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
@@ -1126,6 +1186,40 @@ static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
 	.dp_cfg                 = &sc7180_dpphy_cfg,
 };
 
+static const struct qmp_phy_cfg sm6350_usb3phy_cfg = {
+	.type			= PHY_TYPE_USB3,
+	.lanes			= 2,
+
+	.serdes_tbl		= qmp_v3_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+	.tx_tbl			= qmp_v3_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+	.rx_tbl			= sm6350_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm6350_usb3_rx_tbl),
+	.pcs_tbl		= sm6350_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm6350_usb3_pcs_tbl),
+	.clk_list		= qmp_v3_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v3_usb3phy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+	.phy_status		= PHYSTATUS,
+
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
+	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_combo_cfg sm6350_usb3dpphy_cfg = {
+	.usb_cfg		= &sm6350_usb3phy_cfg,
+	.dp_cfg			= &sc7180_dpphy_cfg,
+};
+
 static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
 	.type			= PHY_TYPE_USB3,
 	.lanes			= 2,
@@ -2753,6 +2847,10 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
 		.compatible = "qcom,sdm845-qmp-usb3-dp-phy",
 		.data = &sdm845_usb3dpphy_cfg,
 	},
+	{
+		.compatible = "qcom,sm6350-qmp-usb3-dp-phy",
+		.data = &sm6350_usb3dpphy_cfg,
+	},
 	{
 		.compatible = "qcom,sm8250-qmp-usb3-dp-phy",
 		.data = &sm8250_usb3dpphy_cfg,
-- 
2.38.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible

[Johan Hovold]

On Mon, Nov 21, 2022 at 08:53:55AM +0100, Luca Weiss wrote:
> Add the compatible describing the combo phy found on SM6350.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> index 97a7ecafbf85..68aecb638870 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> @@ -18,6 +18,7 @@ properties:
>        - qcom,sc8180x-qmp-usb3-dp-phy
>        - qcom,sc8280xp-qmp-usb43dp-phy
>        - qcom,sdm845-qmp-usb3-dp-phy
> +      - qcom,sm6350-qmp-usb3-dp-phy
>        - qcom,sm8250-qmp-usb3-dp-phy
>    reg:
>      items:

The current USB3-DP bindings are broken and we should no be adding
further compatibles here. Please consider rebasing on:

	https://lore.kernel.org/all/20221115144005.2478-1-johan+linaro@kernel.org/

Johan

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible

[Luca Weiss]

Hi Johan,

On Mon Nov 21, 2022 at 9:07 AM CET, Johan Hovold wrote:
> On Mon, Nov 21, 2022 at 08:53:55AM +0100, Luca Weiss wrote:
> > Add the compatible describing the combo phy found on SM6350.
> > 
> > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> > ---
> >  Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> > index 97a7ecafbf85..68aecb638870 100644
> > --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> > @@ -18,6 +18,7 @@ properties:
> >        - qcom,sc8180x-qmp-usb3-dp-phy
> >        - qcom,sc8280xp-qmp-usb43dp-phy
> >        - qcom,sdm845-qmp-usb3-dp-phy
> > +      - qcom,sm6350-qmp-usb3-dp-phy
> >        - qcom,sm8250-qmp-usb3-dp-phy
> >    reg:
> >      items:
>
> The current USB3-DP bindings are broken and we should no be adding
> further compatibles here. Please consider rebasing on:
>
> 	https://lore.kernel.org/all/20221115144005.2478-1-johan+linaro@kernel.org/

I'm not quite clear what you want me to do. Just rebase this change on
top of your patchset and resend or something else?

Regards
Luca

>
> Johan


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible

[Johan Hovold]

On Tue, Nov 22, 2022 at 08:55:31AM +0100, Luca Weiss wrote:
> Hi Johan,
> 
> On Mon Nov 21, 2022 at 9:07 AM CET, Johan Hovold wrote:
> > On Mon, Nov 21, 2022 at 08:53:55AM +0100, Luca Weiss wrote:
> > > Add the compatible describing the combo phy found on SM6350.
> > > 
> > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> > > ---
> > >  Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 1 +
> > >  1 file changed, 1 insertion(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> > > index 97a7ecafbf85..68aecb638870 100644
> > > --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> > > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> > > @@ -18,6 +18,7 @@ properties:
> > >        - qcom,sc8180x-qmp-usb3-dp-phy
> > >        - qcom,sc8280xp-qmp-usb43dp-phy
> > >        - qcom,sdm845-qmp-usb3-dp-phy
> > > +      - qcom,sm6350-qmp-usb3-dp-phy
> > >        - qcom,sm8250-qmp-usb3-dp-phy
> > >    reg:
> > >      items:
> >
> > The current USB3-DP bindings are broken and we should no be adding
> > further compatibles here. Please consider rebasing on:
> >
> > 	https://lore.kernel.org/all/20221115144005.2478-1-johan+linaro@kernel.org/
> 
> I'm not quite clear what you want me to do. Just rebase this change on
> top of your patchset and resend or something else?

Yes, you should rebase this series on top of the above, add
qcom,sm6350-qmp-usb3-dp-phy to the new (sc8280xp) schema, add a
register offset table for QMP v3 to the PHY driver, and update the dts.

Note that the USB/DP configuration structures have been merged (and some
config fields have already been removed in linux-next).

Johan

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy