Re: [PATCH v1 3/4] phy: samsung: add Exynos2200 SNPS eUSB2 driver

[Krzysztof Kozlowski <krzk@kernel.org>]

On 15/02/2025 13:24, Ivaylo Ivanov wrote:
> The Exynos2200 SoC uses Synopsis eUSB2 PHY for USB 2.0. Add a new
> driver for it.
> 
> eUSB2 on Exynos SoCs is usually paired alongside a USB PHY controller.
> Currently the driver is modelled to take and enable/disable the usb phy
> controller when needed.
> 
> The driver is based on information from downstream drivers.
> 
> Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
> ---
>  drivers/phy/samsung/Kconfig                   |  13 +
>  drivers/phy/samsung/Makefile                  |   1 +
>  .../phy/samsung/phy-exynos2200-snps-eusb2.c   | 351 ++++++++++++++++++
>  3 files changed, 365 insertions(+)
>  create mode 100644 drivers/phy/samsung/phy-exynos2200-snps-eusb2.c
> 
> diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
> index e2330b089..f62285254 100644
> --- a/drivers/phy/samsung/Kconfig
> +++ b/drivers/phy/samsung/Kconfig
> @@ -77,6 +77,19 @@ config PHY_S5PV210_USB2
>  	  particular SoC is compiled in the driver. In case of S5PV210 two phys
>  	  are available - device and host.
>  
> +config PHY_EXYNOS2200_SNPS_EUSB2
> +	tristate "Exynos2200 eUSB 2.0 PHY driver"
> +	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	depends on USB_DWC3_EXYNOS


How does it depend? What are you using from DWC3?

> +	select GENERIC_PHY
> +	select MFD_SYSCON

Where do you use it?

> +	default y
> +	help
> +	  Enable USBCON PHY support for Exynos2200 SoC.
> +	  This driver provides PHY interface for eUSB 2.0 controller
> +	  present on Exynos5 SoC series.
> +
>  config PHY_EXYNOS5_USBDRD
>  	tristate "Exynos5 SoC series USB DRD PHY driver"
>  	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
> diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
> index fea1f96d0..90b84c7fc 100644
> --- a/drivers/phy/samsung/Makefile
> +++ b/drivers/phy/samsung/Makefile
> @@ -14,5 +14,6 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2)	+= phy-exynos4210-usb2.o
>  phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2)	+= phy-exynos4x12-usb2.o
>  phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)	+= phy-exynos5250-usb2.o
>  phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
> +obj-$(CONFIG_PHY_EXYNOS2200_SNPS_EUSB2)	+= phy-exynos2200-snps-eusb2.o

Entire driver looks like repeating existing qcom-snps-eusb2. You need to
integrate the changes, not create duplicated driver.

...

> +
> +	ret = devm_clk_bulk_get(dev, drv_data->n_clks,
> +				phy->clks);
> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +				     "failed to get phy clock(s)\n");
> +
> +	for (int i = 0; i < phy->drv_data->n_clks; ++i) {
> +		if (!strcmp(phy->clks[i].id, "ref")) {
> +			phy->ref_clk = phy->clks[i].clk;
> +			break;
> +		}
> +	}
> +
> +	phy->vregs = devm_kcalloc(dev, drv_data->n_regulators,
> +				  sizeof(*phy->vregs), GFP_KERNEL);
> +	if (!phy->vregs)
> +		return -ENOMEM;
> +	regulator_bulk_set_supply_names(phy->vregs,
> +					drv_data->regulator_names,
> +					drv_data->n_regulators);
> +	ret = devm_regulator_bulk_get(dev, drv_data->n_regulators,
> +				      phy->vregs);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to get regulators\n");
> +
> +	/* we treat the usblink controller phy as a separate phy */
> +	phy->usbcon = devm_of_phy_get_by_index(dev, np, 0);
> +	if (IS_ERR(phy->usbcon))
> +		return dev_err_probe(dev, PTR_ERR(phy->usbcon),
> +				     "failed to get usbcon\n");
> +
> +	generic_phy = devm_phy_create(dev, NULL, &exynos2200_snps_eusb2_phy_ops);
> +	if (IS_ERR(generic_phy)) {
> +		dev_err(dev, "failed to create phy %d\n", ret);


Syntax is return dev_err_probe

> +		return PTR_ERR(generic_phy);
> +	}
> +
> +	dev_set_drvdata(dev, phy);
> +	phy_set_drvdata(generic_phy, phy);
> +
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +	if (IS_ERR(phy_provider)) {
> +		dev_err(dev, "failed to register phy provider\n");


Syntax is return dev_err_probe

> +		return PTR_ERR(phy_provider);
> +	};
> +
> +	return 0;
> +}
Best regards,
Krzysztof

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy