Re: [PATCH 00/18] Add USB2.0 support for RZ/G3E

[Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>]

Hi Conor,
Thanks for your review.

On Thu, Oct 02, 2025 at 07:48:57PM +0100, Conor Dooley wrote:
> On Wed, Oct 01, 2025 at 11:26:44PM +0200, Tommaso Merciai wrote:
> > Dear All,
> > 
> > This patch series adds USB2.0 support for the Renesas R9A09G047 (RZ/G3E)
> > SoC and enables it on the RZ/G3E SMARC II board.
> > The RZ/G3E USB2.0 IP is identical to that used in the RZ/V2H (R9A09G057),
> > so the existing support has been extended accordingly.
> > 
> > The series applies on top of [1] and [2] and includes driver cleanups,
> > VBUS/OTG handling fixes, regulator improvements, clock/reset additions,
> > and device tree updates for RZ/G3E, RZ/V2H, and RZ/V2N SoCs and boards.
> > 
> > Thanks & Regards,
> > Tommaso
> 
> If you're not gonna CC me on all the patches in the series, please at
> least CC me on the cover so I have an idea about what is going on in the
> rest of the set.

Sorry, I made a mistake when I sent the series.
I only ran ./scripts/get_maintainer.pl on some patches, not all.
My fault.

> All the bindings are
> Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks for your tag!

Regards,
Tommaso

> 
> Cheers,
> Conor.
> 
> > 
> > [1] https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=1001788
> > [2] https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=1006104
> > 
> > Tommaso Merciai (18):
> >   phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
> >   phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
> >   reset: rzv2h-usb2phy: Simplify pm_runtime driver handling
> >   reset: rzv2h-usb2phy: Set VBENCTL register for OTG mode
> >   dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
> >   phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
> >   regulator: devres: Disable exclusive regulator before releasing
> >   dt-bindings: clock: renesas,r9a09g047-cpg: Add USB2 PHY core clocks
> >   clk: renesas: r9a09g047: Add clock and reset entries for USB2
> >   dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
> >   dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
> >   dt-bindings: reset: Document RZ/G3E USB2PHY reset
> >   arm64: dts: renesas: r9a09g056: Add USB2.0 PHY VBUS internal regulator
> >     node
> >   arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable USB2 PHY0 VBUS
> >     support
> >   arm64: dts: renesas: r9a09g057: Add USB2.0 PHY VBUS internal regulator
> >     node
> >   arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable USB2 PHY0 VBUS
> >     support
> >   arm64: dts: renesas: r9a09g047: Add USB2.0 support
> >   arm64: dts: renesas: r9a09g047e57-smarc: Enable USB2.0 support
> > 
> >  .../bindings/phy/renesas,usb2-phy.yaml        |  10 +-
> >  .../reset/renesas,rzv2h-usb2phy-reset.yaml    |   4 +-
> >  .../bindings/usb/renesas,usbhs.yaml           |   1 +
> >  arch/arm64/boot/dts/renesas/r9a09g047.dtsi    | 122 +++++++++++
> >  .../boot/dts/renesas/r9a09g047e57-smarc.dts   |  49 +++++
> >  arch/arm64/boot/dts/renesas/r9a09g056.dtsi    |   6 +
> >  .../dts/renesas/r9a09g056n48-rzv2n-evk.dts    |   5 +
> >  arch/arm64/boot/dts/renesas/r9a09g057.dtsi    |   6 +
> >  .../dts/renesas/r9a09g057h44-rzv2h-evk.dts    |   5 +
> >  .../boot/dts/renesas/renesas-smarc2.dtsi      |  23 ++
> >  drivers/clk/renesas/r9a09g047-cpg.c           |  18 +-
> >  drivers/phy/renesas/phy-rcar-gen3-usb2.c      | 199 +++++++++++++-----
> >  drivers/regulator/devres.c                    |   8 +-
> >  drivers/reset/reset-rzv2h-usb2phy.c           | 105 ++++++---
> >  .../dt-bindings/clock/renesas,r9a09g047-cpg.h |   2 +
> >  15 files changed, 478 insertions(+), 85 deletions(-)
> > 
> > -- 
> > 2.43.0
> > 



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy