Re: [PATCH v8 3/5] clk: en7523: Add support for selecting the Serdes port in SCU

[Brian Masney <bmasney@redhat.com>]

Hi Christian,

On Wed, May 20, 2026 at 05:09:08PM +0200, Christian Marangi wrote:
> In the SCU register for clock and reset, there are also some register to
> select the Serdes port mode. The Airoha AN7581 SoC have 4 different Serdes
> that can switch between PCIe, USB or Ethernet mode.
> 
> Add a simple PHY provider that expose the .set_mode OP to toggle the
> requested mode for the Serdes port.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  drivers/clk/Kconfig      |   1 +
>  drivers/clk/clk-en7523.c | 216 ++++++++++++++++++++++++++++++++++++++-
>  2 files changed, 214 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index b2efbe9f6acb..e60a824b5117 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -221,6 +221,7 @@ config COMMON_CLK_EN7523
>  	bool "Clock driver for Airoha/EcoNet SoC system clocks"
>  	depends on OF
>  	depends on ARCH_AIROHA || ECONET || COMPILE_TEST
> +	select GENERIC_PHY
>  	default ARCH_AIROHA
>  	help
>  	  This driver provides the fixed clocks and gates present on Airoha
> diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> index 1ab0e2eca5d3..d4b73c5f15b9 100644
> --- a/drivers/clk/clk-en7523.c
> +++ b/drivers/clk/clk-en7523.c
> @@ -6,14 +6,18 @@
>  #include <linux/io.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/platform_device.h>
> +#include <linux/phy.h>
> +#include <linux/phy/phy.h>
>  #include <linux/property.h>
>  #include <linux/regmap.h>
>  #include <linux/reset-controller.h>
> +#include <linux/spinlock.h>
>  #include <dt-bindings/clock/en7523-clk.h>
>  #include <dt-bindings/reset/airoha,en7523-reset.h>
>  #include <dt-bindings/reset/airoha,en7581-reset.h>
>  #include <dt-bindings/clock/econet,en751221-scu.h>
>  #include <dt-bindings/reset/econet,en751221-scu.h>
> +#include <dt-bindings/soc/airoha,scu-ssr.h>
>  
>  #define RST_NR_PER_BANK			32
>  
> @@ -40,9 +44,22 @@
>  #define   REG_HIR_MASK			GENMASK(31, 16)
>  /* EN7581 */
>  #define REG_NP_SCU_PCIC			0x88
> +#define REG_NP_SCU_SSR3			0x94
> +#define REG_SSUSB_HSGMII_SEL_MASK	BIT(29)
> +#define REG_SSUSB_HSGMII_SEL_HSGMII	FIELD_PREP_CONST(REG_SSUSB_HSGMII_SEL_MASK, 0x0)
> +#define REG_SSUSB_HSGMII_SEL_USB	FIELD_PREP_CONST(REG_SSUSB_HSGMII_SEL_MASK, 0x1)
>  #define REG_NP_SCU_SSTR			0x9c
>  #define REG_PCIE_XSI0_SEL_MASK		GENMASK(14, 13)
> +#define REG_PCIE_XSI0_SEL_PCIE		FIELD_PREP_CONST(REG_PCIE_XSI0_SEL_MASK, 0x0)
> +#define REG_PCIE_XSI0_SEL_XFI		FIELD_PREP_CONST(REG_PCIE_XSI0_SEL_MASK, 0x1)
> +#define REG_PCIE_XSI0_SEL_HSGMII	FIELD_PREP_CONST(REG_PCIE_XSI0_SEL_MASK, 0x2)
>  #define REG_PCIE_XSI1_SEL_MASK		GENMASK(12, 11)
> +#define REG_PCIE_XSI1_SEL_PCIE		FIELD_PREP_CONST(REG_PCIE_XSI1_SEL_MASK, 0x0)
> +#define REG_PCIE_XSI1_SEL_XFI		FIELD_PREP_CONST(REG_PCIE_XSI1_SEL_MASK, 0x1)
> +#define REG_PCIE_XSI1_SEL_HSGMII	FIELD_PREP_CONST(REG_PCIE_XSI1_SEL_MASK, 0x2)
> +#define REG_USB_PCIE_SEL_MASK		BIT(3)
> +#define REG_USB_PCIE_SEL_PCIE		FIELD_PREP_CONST(REG_USB_PCIE_SEL_MASK, 0x0)
> +#define REG_USB_PCIE_SEL_USB		FIELD_PREP_CONST(REG_USB_PCIE_SEL_MASK, 0x1)
>  #define REG_CRYPTO_CLKSRC2		0x20c
>  /* EN751221 */
>  #define EN751221_REG_SPI_DIV		0x0cc
> @@ -81,6 +98,8 @@ enum en_hir {
>  	HIR_MAX		= 14,
>  };
>  
> +#define EN_SERDES_PHY_NUM		4
> +
>  struct en_clk_desc {
>  	int id;
>  	const char *name;
> @@ -113,6 +132,18 @@ struct en_rst_data {
>  	struct reset_controller_dev rcdev;
>  };
>  
> +struct en_serdes_phy_instance {
> +	struct phy *phy;
> +	unsigned int serdes_port;
> +};
> +
> +struct en_clk_priv {
> +	void __iomem *base;
> +	/* protect SCU register */
> +	spinlock_t lock;

This spinlock is not initialized with spin_lock_init(). You can do this in
en7523_clk_probe() after devm_kzalloc().

With that fixed:

Reviewed-by: Brian Masney <bmasney@redhat.com>


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy