Re: [PATCH RESEND 03/17] dt-bindings: display: spacemit: add K3 Innosilicon DP/eDP controller

[Cody Kang <codykang.hk@gmail.com>]

Hi Rob,

On Fri, 07 Aug 2026 18:04:04 -0500, Rob Herring wrote:
> On Sat, Jul 25, 2026 at 12:51:12AM -0400, Cody Kang wrote:
> > Both K3 instances are the same IP and share one compatible; which one
> > behaves as eDP is decided by what its downstream port is wired to, not by
> > which register window it sits in, so the binding does not distinguish them.
> >
> > Signed-off-by: Cody Kang <codykang.hk@gmail.com>
> > ---
> >  .../display/spacemit/spacemit,k3-inno-dp.yaml      | 140 +++++++++++++++++++++
> >  1 file changed, 140 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/display/spacemit/spacemit,k3-inno-dp.yaml b/Documentation/devicetree/bindings/display/spacemit/spacemit,k3-inno-dp.yaml
> > new file mode 100644
> > index 000000000000..865ea310daaf
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/spacemit/spacemit,k3-inno-dp.yaml
> > @@ -0,0 +1,140 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/spacemit/spacemit,k3-inno-dp.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: SpacemiT K3 Innosilicon DisplayPort / embedded DisplayPort Controller
> > +
> > +maintainers:
> > +  - Cody Kang <codykang.hk@gmail.com>
> > +
> > +description:
> > +  Innosilicon DisplayPort transmit controller integrated in the SpacemiT K3
> > +  SoC. The K3 has two instances of the same block sharing one compatible;
> > +  each acts as embedded or external DisplayPort depending on whether its
> > +  output port drives a panel or a connector.
> > +
> > +properties:
> > +  compatible:
> > +    const: spacemit,k3-inno-dp
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +    description: Link and hot-plug events.
> > +
> > +  clocks:
> > +    items:
> > +      - description: Pixel clock for the controller.
> > +      - description:
> > +          Pixel clock generated by the DP PHY PLL; the pixel clock above is
> > +          parented onto it in use.
> > +
> > +  clock-names:
> > +    items:
> > +      - const: pxclk
> > +      - const: pll
> > +
> > +  resets:
> > +    maxItems: 1
> > +    description: Controller-wide reset signal.
> > +
> > +  phys:
> > +    maxItems: 1
> > +    description: Phandle to the K3 Innosilicon DP PHY.
> > +
> > +  phy-names:
> > +    items:
> > +      - const: dp
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: Video input from the DPU.
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: Output to the panel or to the DisplayPort connector.
> > +
> > +    required:
> > +      - port@0
>
> Shouldn't port@1 be required too?

Thanks for the review. Yes, will make port@1 required in v2 and
describe the DP connector on the board side (dp-connector) so the
graph is complete.

> Otherwise,
>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Thanks! Will pick up your Reviewed-by with that change in v2.

Cody

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy