* Re: [PATCH v22 6/8] phy: freescale: Add DisplayPort/HDMI Combo-PHY driver for i.MX8MQ
From: Vinod Koul @ 2026-05-03 16:53 UTC (permalink / raw)
To: Laurentiu Palcu
Cc: Parshuram Thombare, Swapnil Jakhade, Neil Armstrong, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, dri-devel,
devicetree, linux-kernel, linux-phy, imx, linux-arm-kernel, linux,
Alexander Stein, Ying Liu
In-Reply-To: <20260424-dcss-hdmi-upstreaming-v22-6-30a28f89298d@oss.nxp.com>
On 24-04-26, 11:07, Laurentiu Palcu wrote:
> From: Sandor Yu <Sandor.yu@nxp.com>
>
> Add Cadence HDP-TX DisplayPort and HDMI PHY driver for i.MX8MQ.
>
> Cadence HDP-TX PHY could be put in either DP mode or
> HDMI mode base on the configuration chosen.
> DisplayPort or HDMI PHY mode is configured in the driver.
Hi,
Please consider if this can be split from rest of the series and posted
as phy driver
Also sasiko has flagged some issues, please take a look https://sashiko.dev/#/patchset/20260424-dcss-hdmi-upstreaming-v22-0-30a28f89298d%40oss.nxp.com
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply
* Re: [PATCH v4 00/16] phy: rockchip: usbdp: Fixes, DP 1-lane support and cleanups
From: Vinod Koul @ 2026-05-03 16:50 UTC (permalink / raw)
To: Sebastian Reichel
Cc: Neil Armstrong, Heiko Stuebner, Frank Wang, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Andy Yan, Dmitry Baryshkov,
Yubing Zhang, Alexey Charkov, linux-phy, linux-arm-kernel,
linux-rockchip, linux-kernel, kernel, devicetree, William Wu
In-Reply-To: <20260428-rockchip-usbdp-cleanup-v4-0-7775671ece22@collabora.com>
Hi Sebastian,
On 28-04-26, 18:13, Sebastian Reichel wrote:
> This series overhauls the Rockchip USBDP driver; apart from a
> a bunch of cleanups and small improvements the main goal is to
> get the driver ready for proper USB-C DP AltMode support.
>
> Once this series has landed, it unblocks enabling proper USB-C
> DP AltMode on the RK3588 and RK3576 platforms incl. runtime PM
> for the Synopsys DesignWare DisplayPort controller.
>
> Apart from this series, further changes are required on the
> DRM side. There are no compile-time dependencies between the
> DRM side and the PHY side, but the PHY side must be applied
> to avoid SErrors once runtime PM is added to the DisplayPort
> controller driver. Thus it would be really good to land this
> series in the next merge window.
Looks like sasiko has flagged 8 high warning, can you please check them
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply
* Re: [PATCH] phy: tegra: xusb: Fix per-pad high-speed termination calibration
From: Vinod Koul @ 2026-05-03 16:40 UTC (permalink / raw)
To: Jon Hunter
Cc: Wei-Cheng Chen, jckuo, neil.armstrong, thierry.reding, linux-phy,
linux-tegra, linux-kernel, waynec, wtsai
In-Reply-To: <77285dd6-e240-4944-a034-a4bc3acf4052@nvidia.com>
On 29-04-26, 10:10, Jon Hunter wrote:
> > > > diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> > > > index d2b5f956513..810b410672f 100644
> > > > --- a/drivers/phy/tegra/xusb.h
> > > > +++ b/drivers/phy/tegra/xusb.h
> > > > @@ -436,6 +436,7 @@ struct tegra_xusb_padctl_soc {
> > > > bool trk_hw_mode;
> > > > bool trk_update_on_idle;
> > > > bool supports_lp_cfg_en;
> > > > + bool has_per_pad_term;
> > > > };
> > > > struct tegra_xusb_padctl {
> > >
> > > Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
> > > Tested-by: Jon Hunter <jonathanh@nvidia.com>
> >
> > I guess this was missed for Linux v7.1. If you don't have any concerns
> > can you pick this up for v7.2 once v7.1-rc1 is out?
>
> OK to pick this up now? It would be great to get this into -next.
Sure I can do that, can Wei-Cheng please rebase this on rc1 and send
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply
* [PATCH v7 phy-next 26/27] phy: remove temporary provider compatibility from consumer header
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Dmitry Baryshkov, Abhinav Kumar,
Alexandre Belloni, André Draszik, Andrew Lunn, Andrzej Hajda,
Andy Yan, Bjorn Helgaas, Chanho Park, Chen-Yu Tsai,
Claudiu Beznea, Damien Le Moal, Daniel Machon, David Airlie,
David S. Miller, Dmitry Baryshkov, Eric Dumazet, Fabio Estevam,
Frank Li, Geert Uytterhoeven, Greg Kroah-Hartman,
Heiko Stübner, Inki Dae, Jagan Teki, Jakub Kicinski,
James E.J. Bottomley, JC Kuo, Jernej Skrabec, Jessica Zhang,
Joe Perches, Johan Hovold, Jonas Karlman, Jonathan Hunter,
Kevin Xie, Krzysztof Kozlowski, Krzysztof Wilczyński,
Laurent Pinchart, Linus Walleij, Lorenzo Pieralisi,
Maarten Lankhorst, Magnus Damm, Manivannan Sadhasivam,
Marc Kleine-Budde, Marek Szyprowski, Marijn Suijten,
Markus Schneider-Pargmann, Martin K. Petersen, Mathias Nyman,
Mauro Carvalho Chehab, Maxime Ripard, Michael Dege, Nicolas Ferre,
Niklas Cassel, Nitin Rawat, Paolo Abeni, Pengutronix Kernel Team,
Peter Chen, Peter Griffin, Rob Clark, Robert Foss, Rob Herring,
Russell King (Oracle), Samuel Holland, Sandy Huang, Sascha Hauer,
Sean Paul, Sebastian Reichel, Shawn Guo, Shawn Lin, Simona Vetter,
Steen Hegelund, Thierry Reding, Thinh Nguyen, Thomas Zimmermann,
Tudor Ambarus, Vincent Mailhol, Yixun Lan, Yoshihiro Shimoda
In-Reply-To: <20260430110652.558622-1-vladimir.oltean@nxp.com>
Now that all consumers have been updated to no longer dereference fields
inside struct phy, we can hide its definition altogether from public view.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
Cc: Abhinav Kumar <abhinav.kumar@linux.dev>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chanho Park <chanho61.park@samsung.com>
Cc: Chen-Yu Tsai <wens@kernel.org>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Daniel Machon <daniel.machon@microchip.com>
Cc: David Airlie <airlied@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: JC Kuo <jckuo@nvidia.com>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Jessica Zhang <jesszhan0024@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Kevin Xie <kevin.xie@starfivetech.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Dege <michael.dege@renesas.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sean Paul <sean@poorly.run>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Yixun Lan <dlan@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
v2->v7: none
v1->v2: collect tag
---
include/linux/phy/phy.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 34b656084caf..0fdcefaa3f55 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -12,8 +12,6 @@
#include <linux/phy/phy-props.h>
-#include "../../../drivers/phy/phy-provider.h"
-
struct device;
struct device_node;
struct phy;
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH v7 phy-next 15/27] phy: move provider API out of public <linux/phy/phy.h>
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Dmitry Baryshkov, Abhinav Kumar,
Alexandre Belloni, André Draszik, Andrew Lunn, Andrzej Hajda,
Andy Yan, Bjorn Helgaas, Chanho Park, Chen-Yu Tsai,
Claudiu Beznea, Damien Le Moal, Daniel Machon, David Airlie,
David S. Miller, Dmitry Baryshkov, Eric Dumazet, Fabio Estevam,
Frank Li, Geert Uytterhoeven, Greg Kroah-Hartman,
Heiko Stübner, Inki Dae, Jagan Teki, Jakub Kicinski,
James E.J. Bottomley, JC Kuo, Jernej Skrabec, Jessica Zhang,
Joe Perches, Johan Hovold, Jonas Karlman, Jonathan Hunter,
Kevin Xie, Krzysztof Kozlowski, Krzysztof Wilczyński,
Laurent Pinchart, Linus Walleij, Lorenzo Pieralisi,
Maarten Lankhorst, Magnus Damm, Manivannan Sadhasivam,
Marc Kleine-Budde, Marek Szyprowski, Marijn Suijten,
Markus Schneider-Pargmann, Martin K. Petersen, Mathias Nyman,
Mauro Carvalho Chehab, Maxime Ripard, Michael Dege, Nicolas Ferre,
Niklas Cassel, Nitin Rawat, Paolo Abeni, Pengutronix Kernel Team,
Peter Chen, Peter Griffin, Rob Clark, Robert Foss, Rob Herring,
Russell King (Oracle), Samuel Holland, Sandy Huang, Sascha Hauer,
Sean Paul, Sebastian Reichel, Shawn Guo, Shawn Lin, Simona Vetter,
Steen Hegelund, Thierry Reding, Thinh Nguyen, Thomas Zimmermann,
Tudor Ambarus, Vincent Mailhol, Yixun Lan, Yoshihiro Shimoda
In-Reply-To: <20260430110652.558622-1-vladimir.oltean@nxp.com>
The major goal is to hide the contents of struct phy from consumer
drivers.
The idea with "phy-props.h" is that both consumers and providers make
use of some data types. So both headers include "phy-props.h".
Some slight points of contention.
1. phy_set_bus_width(): Vinod explains that despite the current caller
situation (9 providers, 1 consumer), it is a consumer API function.
The use case is that the controller (for example UFS) may have
limitations and should set the expected lanes to be used and width on
those lanes. A number of Generic PHYs can support multiple lanes and
multiple width so this is way for controller telling I am using this
configuration.
2. phy-provider.h should go to include/linux/phy/ or to drivers/phy/?
We do have 3 PHY providers outside of drivers/phy/:
drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
but the practice is not encouraged, and with time, these should be
moved to the subsystem. This is not something that I can do now.
3. We can no longer tolerate static inline helpers. Allowing these would
make it impossible to hide the struct phy definition from consumers.
I've made phy_get_mode(), phy_get_bus_width(), phy_set_bus_width()
exported symbols in drivers/phy/phy-core.c.
4. This is not a change without side effects. In the transition we are
no longer providing <linux/pm_runtime.h> at all, and
<linux/regulator/consumer.h> to PHY consumer drivers. However, the
in-tree dependencies should all have been resolved. Also, the
movement of phy-provider.h to drivers/phy/ is at least "interesting"
for out of tree PHY provider drivers (this header is not deployed by
make headers_install). However, it seems to be what Vinod is looking
to see.
For temporary compatibility, keep including the provider header. This
will be removed when abuses are all gotten rid of.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
Cc: Abhinav Kumar <abhinav.kumar@linux.dev>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chanho Park <chanho61.park@samsung.com>
Cc: Chen-Yu Tsai <wens@kernel.org>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Daniel Machon <daniel.machon@microchip.com>
Cc: David Airlie <airlied@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: JC Kuo <jckuo@nvidia.com>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Jessica Zhang <jesszhan0024@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Kevin Xie <kevin.xie@starfivetech.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Dege <michael.dege@renesas.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sean Paul <sean@poorly.run>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Yixun Lan <dlan@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
v2->v7: none
v1->v2:
- collect tag
- fix path to phy-provider.h
- update commit message with the 4th point of contention
---
drivers/phy/phy-core.c | 34 +++
drivers/phy/phy-provider.h | 256 +++++++++++++++++
include/linux/phy/phy-props.h | 75 +++++
include/linux/phy/phy.h | 497 +++++++---------------------------
4 files changed, 456 insertions(+), 406 deletions(-)
create mode 100644 drivers/phy/phy-provider.h
create mode 100644 include/linux/phy/phy-props.h
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 21aaf2f76e53..a1aff00fba7c 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -20,6 +20,22 @@
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
+#define to_phy(a) (container_of((a), struct phy, dev))
+
+/**
+ * struct phy_lookup - PHY association in list of phys managed by the phy driver
+ * @node: list node
+ * @dev_id: the device of the association
+ * @con_id: connection ID string on device
+ * @phy: the phy of the association
+ */
+struct phy_lookup {
+ struct list_head node;
+ const char *dev_id;
+ const char *con_id;
+ struct phy *phy;
+};
+
static void phy_release(struct device *dev);
static const struct class phy_class = {
.name = "phy",
@@ -606,6 +622,24 @@ int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
}
EXPORT_SYMBOL_GPL(phy_validate);
+enum phy_mode phy_get_mode(struct phy *phy)
+{
+ return phy->attrs.mode;
+}
+EXPORT_SYMBOL_GPL(phy_get_mode);
+
+int phy_get_bus_width(struct phy *phy)
+{
+ return phy->attrs.bus_width;
+}
+EXPORT_SYMBOL_GPL(phy_get_bus_width);
+
+void phy_set_bus_width(struct phy *phy, int bus_width)
+{
+ phy->attrs.bus_width = bus_width;
+}
+EXPORT_SYMBOL_GPL(phy_set_bus_width);
+
/**
* _of_phy_get() - lookup and obtain a reference to a phy by phandle
* @np: device_node for which to get the phy
diff --git a/drivers/phy/phy-provider.h b/drivers/phy/phy-provider.h
new file mode 100644
index 000000000000..0637278a2d8d
--- /dev/null
+++ b/drivers/phy/phy-provider.h
@@ -0,0 +1,256 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * phy-provider.h -- Generic PHY provider API
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+#ifndef __PHY_PROVIDER_H
+#define __PHY_PROVIDER_H
+
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/phy/phy-props.h>
+
+struct phy;
+
+/**
+ * struct phy_ops - set of function pointers for performing phy operations
+ * @init: operation to be performed for initializing phy
+ * @exit: operation to be performed while exiting
+ * @power_on: powering on the phy
+ * @power_off: powering off the phy
+ * @set_mode: set the mode of the phy
+ * @set_media: set the media type of the phy (optional)
+ * @set_speed: set the speed of the phy (optional)
+ * @reset: resetting the phy
+ * @calibrate: calibrate the phy
+ * @notify_phystate: notify and configure the phy for a particular state
+ * @release: ops to be performed while the consumer relinquishes the PHY
+ * @owner: the module owner containing the ops
+ */
+struct phy_ops {
+ int (*init)(struct phy *phy);
+ int (*exit)(struct phy *phy);
+ int (*power_on)(struct phy *phy);
+ int (*power_off)(struct phy *phy);
+ int (*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
+ int (*set_media)(struct phy *phy, enum phy_media media);
+ int (*set_speed)(struct phy *phy, int speed);
+
+ /**
+ * @configure:
+ *
+ * Optional.
+ *
+ * Used to change the PHY parameters. phy_init() must have
+ * been called on the phy.
+ *
+ * Returns: 0 if successful, an negative error code otherwise
+ */
+ int (*configure)(struct phy *phy, union phy_configure_opts *opts);
+
+ /**
+ * @validate:
+ *
+ * Optional.
+ *
+ * Used to check that the current set of parameters can be
+ * handled by the phy. Implementations are free to tune the
+ * parameters passed as arguments if needed by some
+ * implementation detail or constraints. It must not change
+ * any actual configuration of the PHY, so calling it as many
+ * times as deemed fit by the consumer must have no side
+ * effect.
+ *
+ * Returns: 0 if the configuration can be applied, an negative
+ * error code otherwise
+ */
+ int (*validate)(struct phy *phy, enum phy_mode mode, int submode,
+ union phy_configure_opts *opts);
+ int (*reset)(struct phy *phy);
+ int (*calibrate)(struct phy *phy);
+
+ /* notify phy connect status change */
+ int (*connect)(struct phy *phy, int port);
+ int (*disconnect)(struct phy *phy, int port);
+
+ int (*notify_phystate)(struct phy *phy, union phy_notify state);
+ void (*release)(struct phy *phy);
+ struct module *owner;
+};
+
+/**
+ * struct phy_attrs - represents phy attributes
+ * @bus_width: Data path width implemented by PHY
+ * @max_link_rate: Maximum link rate supported by PHY (units to be decided by producer and consumer)
+ * @mode: PHY mode
+ */
+struct phy_attrs {
+ u32 bus_width;
+ u32 max_link_rate;
+ enum phy_mode mode;
+};
+
+/**
+ * struct phy - represents the phy device
+ * @dev: phy device
+ * @id: id of the phy device
+ * @ops: function pointers for performing phy operations
+ * @mutex: mutex to protect phy_ops
+ * @lockdep_key: lockdep information for this mutex
+ * @init_count: used to protect when the PHY is used by multiple consumers
+ * @power_count: used to protect when the PHY is used by multiple consumers
+ * @attrs: used to specify PHY specific attributes
+ * @pwr: power regulator associated with the phy
+ * @debugfs: debugfs directory
+ */
+struct phy {
+ struct device dev;
+ int id;
+ const struct phy_ops *ops;
+ struct mutex mutex;
+ struct lock_class_key lockdep_key;
+ int init_count;
+ int power_count;
+ struct phy_attrs attrs;
+ struct regulator *pwr;
+ struct dentry *debugfs;
+};
+
+/**
+ * struct phy_provider - represents the phy provider
+ * @dev: phy provider device
+ * @children: can be used to override the default (dev->of_node) child node
+ * @owner: the module owner having of_xlate
+ * @list: to maintain a linked list of PHY providers
+ * @of_xlate: function pointer to obtain phy instance from phy pointer
+ */
+struct phy_provider {
+ struct device *dev;
+ struct device_node *children;
+ struct module *owner;
+ struct list_head list;
+ struct phy *(*of_xlate)(struct device *dev,
+ const struct of_phandle_args *args);
+};
+
+#define of_phy_provider_register(dev, xlate) \
+ __of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+
+#define devm_of_phy_provider_register(dev, xlate) \
+ __devm_of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+
+#define of_phy_provider_register_full(dev, children, xlate) \
+ __of_phy_provider_register(dev, children, THIS_MODULE, xlate)
+
+#define devm_of_phy_provider_register_full(dev, children, xlate) \
+ __devm_of_phy_provider_register(dev, children, THIS_MODULE, xlate)
+
+static inline void phy_set_drvdata(struct phy *phy, void *data)
+{
+ dev_set_drvdata(&phy->dev, data);
+}
+
+static inline void *phy_get_drvdata(struct phy *phy)
+{
+ return dev_get_drvdata(&phy->dev);
+}
+
+#if IS_ENABLED(CONFIG_GENERIC_PHY)
+struct phy *phy_create(struct device *dev, struct device_node *node,
+ const struct phy_ops *ops);
+struct phy *devm_phy_create(struct device *dev, struct device_node *node,
+ const struct phy_ops *ops);
+void phy_destroy(struct phy *phy);
+void devm_phy_destroy(struct device *dev, struct phy *phy);
+
+struct phy_provider *
+__of_phy_provider_register(struct device *dev, struct device_node *children,
+ struct module *owner,
+ struct phy *(*of_xlate)(struct device *dev,
+ const struct of_phandle_args *args));
+struct phy_provider *
+__devm_of_phy_provider_register(struct device *dev, struct device_node *children,
+ struct module *owner,
+ struct phy *(*of_xlate)(struct device *dev,
+ const struct of_phandle_args *args));
+void of_phy_provider_unregister(struct phy_provider *phy_provider);
+void devm_of_phy_provider_unregister(struct device *dev,
+ struct phy_provider *phy_provider);
+int phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id);
+void phy_remove_lookup(struct phy *phy, const char *con_id, const char *dev_id);
+struct phy *of_phy_simple_xlate(struct device *dev,
+ const struct of_phandle_args *args);
+#else
+static inline struct phy *phy_create(struct device *dev,
+ struct device_node *node,
+ const struct phy_ops *ops)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_phy_create(struct device *dev,
+ struct device_node *node,
+ const struct phy_ops *ops)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline void phy_destroy(struct phy *phy)
+{
+}
+
+static inline void devm_phy_destroy(struct device *dev, struct phy *phy)
+{
+}
+
+static inline struct phy_provider *
+__of_phy_provider_register(struct device *dev, struct device_node *children,
+ struct module *owner,
+ struct phy *(*of_xlate)(struct device *dev,
+ const struct of_phandle_args *args))
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy_provider *
+__devm_of_phy_provider_register(struct device *dev, struct device_node *children,
+ struct module *owner,
+ struct phy *(*of_xlate)(struct device *dev,
+ const struct of_phandle_args *args))
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline void of_phy_provider_unregister(struct phy_provider *phy_provider)
+{
+}
+
+static inline void devm_of_phy_provider_unregister(struct device *dev,
+ struct phy_provider *phy_provider)
+{
+}
+
+static inline int phy_create_lookup(struct phy *phy, const char *con_id,
+ const char *dev_id)
+{
+ return 0;
+}
+
+static inline void phy_remove_lookup(struct phy *phy, const char *con_id,
+ const char *dev_id)
+{
+}
+
+static inline struct phy *of_phy_simple_xlate(struct device *dev,
+ const struct of_phandle_args *args)
+{
+ return ERR_PTR(-ENOSYS);
+}
+#endif /* IS_ENABLED(CONFIG_GENERIC_PHY) */
+
+#endif /* __PHY_PROVIDER_H */
diff --git a/include/linux/phy/phy-props.h b/include/linux/phy/phy-props.h
new file mode 100644
index 000000000000..11f36738165f
--- /dev/null
+++ b/include/linux/phy/phy-props.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * phy-provider.h -- Generic PHY properties
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+#ifndef __PHY_PROPS_H
+#define __PHY_PROPS_H
+
+#include <linux/phy/phy-dp.h>
+#include <linux/phy/phy-hdmi.h>
+#include <linux/phy/phy-lvds.h>
+#include <linux/phy/phy-mipi-dphy.h>
+
+enum phy_mode {
+ PHY_MODE_INVALID,
+ PHY_MODE_USB_HOST,
+ PHY_MODE_USB_HOST_LS,
+ PHY_MODE_USB_HOST_FS,
+ PHY_MODE_USB_HOST_HS,
+ PHY_MODE_USB_HOST_SS,
+ PHY_MODE_USB_DEVICE,
+ PHY_MODE_USB_DEVICE_LS,
+ PHY_MODE_USB_DEVICE_FS,
+ PHY_MODE_USB_DEVICE_HS,
+ PHY_MODE_USB_DEVICE_SS,
+ PHY_MODE_USB_OTG,
+ PHY_MODE_UFS_HS_A,
+ PHY_MODE_UFS_HS_B,
+ PHY_MODE_PCIE,
+ PHY_MODE_ETHERNET,
+ PHY_MODE_MIPI_DPHY,
+ PHY_MODE_SATA,
+ PHY_MODE_LVDS,
+ PHY_MODE_DP,
+ PHY_MODE_HDMI,
+};
+
+enum phy_media {
+ PHY_MEDIA_DEFAULT,
+ PHY_MEDIA_SR,
+ PHY_MEDIA_DAC,
+};
+
+enum phy_ufs_state {
+ PHY_UFS_HIBERN8_ENTER,
+ PHY_UFS_HIBERN8_EXIT,
+};
+
+union phy_notify {
+ enum phy_ufs_state ufs_state;
+};
+
+/**
+ * union phy_configure_opts - Opaque generic phy configuration
+ *
+ * @mipi_dphy: Configuration set applicable for phys supporting
+ * the MIPI_DPHY phy mode.
+ * @dp: Configuration set applicable for phys supporting
+ * the DisplayPort protocol.
+ * @lvds: Configuration set applicable for phys supporting
+ * the LVDS phy mode.
+ * @hdmi: Configuration set applicable for phys supporting
+ * the HDMI phy mode.
+ */
+union phy_configure_opts {
+ struct phy_configure_opts_mipi_dphy mipi_dphy;
+ struct phy_configure_opts_dp dp;
+ struct phy_configure_opts_lvds lvds;
+ struct phy_configure_opts_hdmi hdmi;
+};
+
+#endif /* __PHY_PROPS_H */
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index ea47975e288a..f208edd25afe 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -1,246 +1,38 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
- * phy.h -- generic phy header file
+ * phy.h -- Generic PHY consumer API
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
*
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*/
-#ifndef __DRIVERS_PHY_H
-#define __DRIVERS_PHY_H
+#ifndef __PHY_CONSUMER_H
+#define __PHY_CONSUMER_H
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/device.h>
-#include <linux/pm_runtime.h>
-#include <linux/regulator/consumer.h>
+#include <linux/phy/phy-props.h>
-#include <linux/phy/phy-dp.h>
-#include <linux/phy/phy-hdmi.h>
-#include <linux/phy/phy-lvds.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../../../drivers/phy/phy-provider.h"
+struct device;
+struct device_node;
struct phy;
-enum phy_mode {
- PHY_MODE_INVALID,
- PHY_MODE_USB_HOST,
- PHY_MODE_USB_HOST_LS,
- PHY_MODE_USB_HOST_FS,
- PHY_MODE_USB_HOST_HS,
- PHY_MODE_USB_HOST_SS,
- PHY_MODE_USB_DEVICE,
- PHY_MODE_USB_DEVICE_LS,
- PHY_MODE_USB_DEVICE_FS,
- PHY_MODE_USB_DEVICE_HS,
- PHY_MODE_USB_DEVICE_SS,
- PHY_MODE_USB_OTG,
- PHY_MODE_UFS_HS_A,
- PHY_MODE_UFS_HS_B,
- PHY_MODE_PCIE,
- PHY_MODE_ETHERNET,
- PHY_MODE_MIPI_DPHY,
- PHY_MODE_SATA,
- PHY_MODE_LVDS,
- PHY_MODE_DP,
- PHY_MODE_HDMI,
-};
-
-enum phy_media {
- PHY_MEDIA_DEFAULT,
- PHY_MEDIA_SR,
- PHY_MEDIA_DAC,
-};
-
-enum phy_ufs_state {
- PHY_UFS_HIBERN8_ENTER,
- PHY_UFS_HIBERN8_EXIT,
-};
-
-union phy_notify {
- enum phy_ufs_state ufs_state;
-};
-
-/**
- * union phy_configure_opts - Opaque generic phy configuration
- *
- * @mipi_dphy: Configuration set applicable for phys supporting
- * the MIPI_DPHY phy mode.
- * @dp: Configuration set applicable for phys supporting
- * the DisplayPort protocol.
- * @lvds: Configuration set applicable for phys supporting
- * the LVDS phy mode.
- * @hdmi: Configuration set applicable for phys supporting
- * the HDMI phy mode.
- */
-union phy_configure_opts {
- struct phy_configure_opts_mipi_dphy mipi_dphy;
- struct phy_configure_opts_dp dp;
- struct phy_configure_opts_lvds lvds;
- struct phy_configure_opts_hdmi hdmi;
-};
-
-/**
- * struct phy_ops - set of function pointers for performing phy operations
- * @init: operation to be performed for initializing phy
- * @exit: operation to be performed while exiting
- * @power_on: powering on the phy
- * @power_off: powering off the phy
- * @set_mode: set the mode of the phy
- * @set_media: set the media type of the phy (optional)
- * @set_speed: set the speed of the phy (optional)
- * @reset: resetting the phy
- * @calibrate: calibrate the phy
- * @notify_phystate: notify and configure the phy for a particular state
- * @release: ops to be performed while the consumer relinquishes the PHY
- * @owner: the module owner containing the ops
- */
-struct phy_ops {
- int (*init)(struct phy *phy);
- int (*exit)(struct phy *phy);
- int (*power_on)(struct phy *phy);
- int (*power_off)(struct phy *phy);
- int (*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
- int (*set_media)(struct phy *phy, enum phy_media media);
- int (*set_speed)(struct phy *phy, int speed);
-
- /**
- * @configure:
- *
- * Optional.
- *
- * Used to change the PHY parameters. phy_init() must have
- * been called on the phy.
- *
- * Returns: 0 if successful, an negative error code otherwise
- */
- int (*configure)(struct phy *phy, union phy_configure_opts *opts);
-
- /**
- * @validate:
- *
- * Optional.
- *
- * Used to check that the current set of parameters can be
- * handled by the phy. Implementations are free to tune the
- * parameters passed as arguments if needed by some
- * implementation detail or constraints. It must not change
- * any actual configuration of the PHY, so calling it as many
- * times as deemed fit by the consumer must have no side
- * effect.
- *
- * Returns: 0 if the configuration can be applied, an negative
- * error code otherwise
- */
- int (*validate)(struct phy *phy, enum phy_mode mode, int submode,
- union phy_configure_opts *opts);
- int (*reset)(struct phy *phy);
- int (*calibrate)(struct phy *phy);
-
- /* notify phy connect status change */
- int (*connect)(struct phy *phy, int port);
- int (*disconnect)(struct phy *phy, int port);
-
- int (*notify_phystate)(struct phy *phy, union phy_notify state);
- void (*release)(struct phy *phy);
- struct module *owner;
-};
-
-/**
- * struct phy_attrs - represents phy attributes
- * @bus_width: Data path width implemented by PHY
- * @max_link_rate: Maximum link rate supported by PHY (units to be decided by producer and consumer)
- * @mode: PHY mode
- */
-struct phy_attrs {
- u32 bus_width;
- u32 max_link_rate;
- enum phy_mode mode;
-};
-
-/**
- * struct phy - represents the phy device
- * @dev: phy device
- * @id: id of the phy device
- * @ops: function pointers for performing phy operations
- * @mutex: mutex to protect phy_ops
- * @lockdep_key: lockdep information for this mutex
- * @init_count: used to protect when the PHY is used by multiple consumers
- * @power_count: used to protect when the PHY is used by multiple consumers
- * @attrs: used to specify PHY specific attributes
- * @pwr: power regulator associated with the phy
- * @debugfs: debugfs directory
- */
-struct phy {
- struct device dev;
- int id;
- const struct phy_ops *ops;
- struct mutex mutex;
- struct lock_class_key lockdep_key;
- int init_count;
- int power_count;
- struct phy_attrs attrs;
- struct regulator *pwr;
- struct dentry *debugfs;
-};
-
-/**
- * struct phy_provider - represents the phy provider
- * @dev: phy provider device
- * @children: can be used to override the default (dev->of_node) child node
- * @owner: the module owner having of_xlate
- * @list: to maintain a linked list of PHY providers
- * @of_xlate: function pointer to obtain phy instance from phy pointer
- */
-struct phy_provider {
- struct device *dev;
- struct device_node *children;
- struct module *owner;
- struct list_head list;
- struct phy * (*of_xlate)(struct device *dev,
- const struct of_phandle_args *args);
-};
-
-/**
- * struct phy_lookup - PHY association in list of phys managed by the phy driver
- * @node: list node
- * @dev_id: the device of the association
- * @con_id: connection ID string on device
- * @phy: the phy of the association
- */
-struct phy_lookup {
- struct list_head node;
- const char *dev_id;
- const char *con_id;
- struct phy *phy;
-};
-
-#define to_phy(a) (container_of((a), struct phy, dev))
-
-#define of_phy_provider_register(dev, xlate) \
- __of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
-
-#define devm_of_phy_provider_register(dev, xlate) \
- __devm_of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
-
-#define of_phy_provider_register_full(dev, children, xlate) \
- __of_phy_provider_register(dev, children, THIS_MODULE, xlate)
-
-#define devm_of_phy_provider_register_full(dev, children, xlate) \
- __devm_of_phy_provider_register(dev, children, THIS_MODULE, xlate)
-
-static inline void phy_set_drvdata(struct phy *phy, void *data)
-{
- dev_set_drvdata(&phy->dev, data);
-}
-
-static inline void *phy_get_drvdata(struct phy *phy)
-{
- return dev_get_drvdata(&phy->dev);
-}
-
#if IS_ENABLED(CONFIG_GENERIC_PHY)
+struct phy *phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+struct phy *devm_of_phy_get(struct device *dev, struct device_node *np,
+ const char *con_id);
+struct phy *devm_of_phy_optional_get(struct device *dev, struct device_node *np,
+ const char *con_id);
+struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
+ int index);
+void of_phy_put(struct phy *phy);
+void phy_put(struct device *dev, struct phy *phy);
+void devm_phy_put(struct device *dev, struct phy *phy);
+struct phy *of_phy_get(struct device_node *np, const char *con_id);
+
int phy_pm_runtime_get(struct phy *phy);
int phy_pm_runtime_get_sync(struct phy *phy);
void phy_pm_runtime_put(struct phy *phy);
@@ -257,59 +49,69 @@ int phy_set_speed(struct phy *phy, int speed);
int phy_configure(struct phy *phy, union phy_configure_opts *opts);
int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
union phy_configure_opts *opts);
-
-static inline enum phy_mode phy_get_mode(struct phy *phy)
-{
- return phy->attrs.mode;
-}
+enum phy_mode phy_get_mode(struct phy *phy);
int phy_reset(struct phy *phy);
int phy_calibrate(struct phy *phy);
int phy_notify_connect(struct phy *phy, int port);
int phy_notify_disconnect(struct phy *phy, int port);
int phy_notify_state(struct phy *phy, union phy_notify state);
-static inline int phy_get_bus_width(struct phy *phy)
+int phy_get_bus_width(struct phy *phy);
+void phy_set_bus_width(struct phy *phy, int bus_width);
+#else
+static inline struct phy *phy_get(struct device *dev, const char *string)
{
- return phy->attrs.bus_width;
+ return ERR_PTR(-ENOSYS);
}
-static inline void phy_set_bus_width(struct phy *phy, int bus_width)
+
+static inline struct phy *devm_phy_get(struct device *dev, const char *string)
{
- phy->attrs.bus_width = bus_width;
+ return ERR_PTR(-ENOSYS);
}
-struct phy *phy_get(struct device *dev, const char *string);
-struct phy *devm_phy_get(struct device *dev, const char *string);
-struct phy *devm_phy_optional_get(struct device *dev, const char *string);
-struct phy *devm_of_phy_get(struct device *dev, struct device_node *np,
- const char *con_id);
-struct phy *devm_of_phy_optional_get(struct device *dev, struct device_node *np,
- const char *con_id);
-struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
- int index);
-void of_phy_put(struct phy *phy);
-void phy_put(struct device *dev, struct phy *phy);
-void devm_phy_put(struct device *dev, struct phy *phy);
-struct phy *of_phy_get(struct device_node *np, const char *con_id);
-struct phy *of_phy_simple_xlate(struct device *dev,
- const struct of_phandle_args *args);
-struct phy *phy_create(struct device *dev, struct device_node *node,
- const struct phy_ops *ops);
-struct phy *devm_phy_create(struct device *dev, struct device_node *node,
- const struct phy_ops *ops);
-void phy_destroy(struct phy *phy);
-void devm_phy_destroy(struct device *dev, struct phy *phy);
-struct phy_provider *__of_phy_provider_register(struct device *dev,
- struct device_node *children, struct module *owner,
- struct phy * (*of_xlate)(struct device *dev,
- const struct of_phandle_args *args));
-struct phy_provider *__devm_of_phy_provider_register(struct device *dev,
- struct device_node *children, struct module *owner,
- struct phy * (*of_xlate)(struct device *dev,
- const struct of_phandle_args *args));
-void of_phy_provider_unregister(struct phy_provider *phy_provider);
-void devm_of_phy_provider_unregister(struct device *dev,
- struct phy_provider *phy_provider);
-int phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id);
-void phy_remove_lookup(struct phy *phy, const char *con_id, const char *dev_id);
-#else
+
+static inline struct phy *devm_phy_optional_get(struct device *dev,
+ const char *string)
+{
+ return NULL;
+}
+
+static inline struct phy *devm_of_phy_get(struct device *dev,
+ struct device_node *np,
+ const char *con_id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_of_phy_optional_get(struct device *dev,
+ struct device_node *np,
+ const char *con_id)
+{
+ return NULL;
+}
+
+static inline struct phy *devm_of_phy_get_by_index(struct device *dev,
+ struct device_node *np,
+ int index)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline void of_phy_put(struct phy *phy)
+{
+}
+
+static inline void phy_put(struct device *dev, struct phy *phy)
+{
+}
+
+static inline void devm_phy_put(struct device *dev, struct phy *phy)
+{
+}
+
+static inline struct phy *of_phy_get(struct device_node *np, const char *con_id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
static inline int phy_pm_runtime_get(struct phy *phy)
{
if (!phy)
@@ -388,61 +190,59 @@ static inline int phy_set_speed(struct phy *phy, int speed)
return -ENODEV;
}
-static inline enum phy_mode phy_get_mode(struct phy *phy)
-{
- return PHY_MODE_INVALID;
-}
-
-static inline int phy_reset(struct phy *phy)
+static inline int phy_configure(struct phy *phy,
+ union phy_configure_opts *opts)
{
if (!phy)
return 0;
return -ENOSYS;
}
-static inline int phy_calibrate(struct phy *phy)
+static inline int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
+ union phy_configure_opts *opts)
{
if (!phy)
return 0;
return -ENOSYS;
}
-static inline int phy_notify_connect(struct phy *phy, int index)
+static inline enum phy_mode phy_get_mode(struct phy *phy)
+{
+ return PHY_MODE_INVALID;
+}
+
+static inline int phy_reset(struct phy *phy)
{
if (!phy)
return 0;
return -ENOSYS;
}
-static inline int phy_notify_disconnect(struct phy *phy, int index)
+static inline int phy_calibrate(struct phy *phy)
{
if (!phy)
return 0;
return -ENOSYS;
}
-static inline int phy_notify_state(struct phy *phy, union phy_notify state)
+static inline int phy_notify_connect(struct phy *phy, int index)
{
if (!phy)
return 0;
return -ENOSYS;
}
-static inline int phy_configure(struct phy *phy,
- union phy_configure_opts *opts)
+static inline int phy_notify_disconnect(struct phy *phy, int index)
{
if (!phy)
return 0;
-
return -ENOSYS;
}
-static inline int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
- union phy_configure_opts *opts)
+static inline int phy_notify_state(struct phy *phy, union phy_notify state)
{
if (!phy)
return 0;
-
return -ENOSYS;
}
@@ -453,122 +253,7 @@ static inline int phy_get_bus_width(struct phy *phy)
static inline void phy_set_bus_width(struct phy *phy, int bus_width)
{
- return;
-}
-
-static inline struct phy *phy_get(struct device *dev, const char *string)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_phy_get(struct device *dev, const char *string)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_phy_optional_get(struct device *dev,
- const char *string)
-{
- return NULL;
-}
-
-static inline struct phy *devm_of_phy_get(struct device *dev,
- struct device_node *np,
- const char *con_id)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_of_phy_optional_get(struct device *dev,
- struct device_node *np,
- const char *con_id)
-{
- return NULL;
-}
-
-static inline struct phy *devm_of_phy_get_by_index(struct device *dev,
- struct device_node *np,
- int index)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline void of_phy_put(struct phy *phy)
-{
-}
-
-static inline void phy_put(struct device *dev, struct phy *phy)
-{
-}
-
-static inline void devm_phy_put(struct device *dev, struct phy *phy)
-{
-}
-
-static inline struct phy *of_phy_get(struct device_node *np, const char *con_id)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *of_phy_simple_xlate(struct device *dev,
- const struct of_phandle_args *args)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *phy_create(struct device *dev,
- struct device_node *node,
- const struct phy_ops *ops)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_phy_create(struct device *dev,
- struct device_node *node,
- const struct phy_ops *ops)
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline void phy_destroy(struct phy *phy)
-{
-}
-
-static inline void devm_phy_destroy(struct device *dev, struct phy *phy)
-{
-}
-
-static inline struct phy_provider *__of_phy_provider_register(
- struct device *dev, struct device_node *children, struct module *owner,
- struct phy * (*of_xlate)(struct device *dev,
- const struct of_phandle_args *args))
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy_provider *__devm_of_phy_provider_register(struct device
- *dev, struct device_node *children, struct module *owner,
- struct phy * (*of_xlate)(struct device *dev,
- const struct of_phandle_args *args))
-{
- return ERR_PTR(-ENOSYS);
-}
-
-static inline void of_phy_provider_unregister(struct phy_provider *phy_provider)
-{
-}
-
-static inline void devm_of_phy_provider_unregister(struct device *dev,
- struct phy_provider *phy_provider)
-{
-}
-static inline int
-phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id)
-{
- return 0;
}
-static inline void phy_remove_lookup(struct phy *phy, const char *con_id,
- const char *dev_id) { }
-#endif
+#endif /* IS_ENABLED(CONFIG_GENERIC_PHY) */
-#endif /* __DRIVERS_PHY_H */
+#endif /* __PHY_CONSUMER_H */
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH v7 phy-next 00/27] Split Generic PHY consumer and provider
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Abhinav Kumar, Alexandre Belloni,
André Draszik, Andrew Lunn, Andrzej Hajda, Andy Yan,
Bjorn Helgaas, Chanho Park, Chen-Yu Tsai, Claudiu Beznea,
Damien Le Moal, Daniel Machon, David Airlie, David S. Miller,
Dmitry Baryshkov, Eric Dumazet, Fabio Estevam, Frank Li,
Geert Uytterhoeven, Greg Kroah-Hartman, Heiko Stübner,
Inki Dae, Jagan Teki, Jakub Kicinski, James E.J. Bottomley,
JC Kuo, Jernej Skrabec, Jessica Zhang, Joe Perches, Johan Hovold,
Jonas Karlman, Jonathan Hunter, Kevin Xie, Krzysztof Kozlowski,
Krzysztof Wilczyński, Laurent Pinchart, Linus Walleij,
Lorenzo Pieralisi, Maarten Lankhorst, Magnus Damm,
Manivannan Sadhasivam, Marc Kleine-Budde, Marek Szyprowski,
Marijn Suijten, Markus Schneider-Pargmann, Martin K. Petersen,
Mathias Nyman, Mauro Carvalho Chehab, Maxime Ripard, Michael Dege,
Nicolas Ferre, Niklas Cassel, Nitin Rawat, Paolo Abeni,
Pengutronix Kernel Team, Peter Chen, Peter Griffin, Rob Clark,
Robert Foss, Rob Herring, Russell King (Oracle), Samuel Holland,
Sandy Huang, Sascha Hauer, Sean Paul, Sebastian Reichel,
Shawn Guo, Shawn Lin, Simona Vetter, Steen Hegelund,
Thierry Reding, Thinh Nguyen, Thomas Zimmermann, Tudor Ambarus,
Vincent Mailhol, Xu Yang, Yixun Lan, Yoshihiro Shimoda
The biggest problem requiring this split is the fact that consumer
drivers poke around in struct phy, accessing fields which shouldn't be
visible to them. Follow the example of mux, gpio, iio, spi offload,
pwrsec, pinctrl and regulator, which each expose separate headers for
consumers and providers.
Some off-list discussions were had with Vinod Koul regarding the 3 PHY
providers outside the drivers/phy/ subsystem. It was agreed that it is
desirable to relocate them to drivers/phy/, rather than to publish
phy-provider.h to include/linux/phy/ for liberal use. Only phy.h and
(new) phy-props.h - consumer-facing headers - stay there.
The hope is that developers get a hint when they need to include the
wrong header to get their job done.
If that fails, patch 27/27 adds a regex in the MAINTAINERS entry that
ensures linux-phy is copied on all Generic PHY patches, for an extra set
of eyes.
Requested merge strategy, I hope this works for everyone:
- Subsystem maintainers ACK their affected portions
- Entire series goes through linux-phy/next (v7.1-rc1)
- linux-phy provides stable tag
- (optionally, but recommended) Said tag is merged back into affected
subsystem 'next' branches. Those who strongly prefer can handle merge
conflicts when they send their PR. But this series unexports a lot of
stuff from <linux/phy/phy.h> which may cause breakage if still used
later, directly or not, in other subsystems.
Detailed change log in patches, summary below.
v6->v7:
- "[PATCH v6 phy-next 15/28] drm/msm/dp: remove debugging prints with
internal struct phy state" merged separately:
https://lore.kernel.org/linux-phy/okmmblz53sdgjwduiszsyo5l2hcqnxm3xq5yojbi6uxp7kmojm@jaz2a34av7ww/#t
- rebase onto v7.1-rc1
- fix new fallout in drivers/usb/dwc3/dwc3-imx.c (patch 03/27) due to
crossing paths with new driver
v5->v6:
- new patch 11/28 to avoid build breakage in ufs-qcom.c for armv7
- expanded CC list coverage
v4->v5:
- fix additional compilation breakage caught by better build coverage.
PCI patch 02/27 received an extra change for pcie-spacemit-k1.c,
patch 10/27 (for ufs-qcom.c) is new, so are 12/27 and 13/27 for Tegra
USB (host and gadget)
v3->v4:
- fix build breakage in drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c and
include/linux/phy/tegra/xusb.h added by patch 22/24
v2->v3:
- remove unused variable in PCI after device link removal
- update MAINTAINERS regex pattern to escape forward slashes
- add more people to CC list
- provide conflict resolution
v1->v2:
- split "phy: include PHY provider header" into smaller chunks to work
around mailing list moderation due to patch size
- improve MAINTAINERS regex pattern
- make all PHY attribute helpers NULL-tolerant. Not just the new
phy_get_bus_width(), but also retroactively, the existing ones.
- fixed the temporary include path from <linux/phy/phy.h> to
"phy-provider.h", removed anyway by the end of the series
- logical bug fixes in the PCI controller <-> PHY device link removal
and Exynos UFS PHY API rework
In case anyone wants to test the series, here it is on top of linux-phy/next:
https://github.com/vladimiroltean/linux/tree/phy-split-consumer-provider-v7
v6 at:
https://lore.kernel.org/linux-phy/20260327184706.1600329-1-vladimir.oltean@nxp.com/
v5 at:
https://lore.kernel.org/linux-phy/20260319223241.1351137-1-vladimir.oltean@nxp.com/
v4 at:
https://lore.kernel.org/linux-phy/20260317230500.2056077-1-vladimir.oltean@nxp.com/
v3 at:
https://lore.kernel.org/linux-phy/20260309190842.927634-1-vladimir.oltean@nxp.com/
v2 at:
https://lore.kernel.org/linux-phy/20260308114009.2546587-1-vladimir.oltean@nxp.com/
v1 at:
https://lore.kernel.org/linux-phy/20260304175735.2660419-13-vladimir.oltean@nxp.com/
Cc: Abhinav Kumar <abhinav.kumar@linux.dev>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chanho Park <chanho61.park@samsung.com>
Cc: Chen-Yu Tsai <wens@kernel.org>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Daniel Machon <daniel.machon@microchip.com>
Cc: David Airlie <airlied@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: JC Kuo <jckuo@nvidia.com>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Jessica Zhang <jesszhan0024@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Kevin Xie <kevin.xie@starfivetech.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Dege <michael.dege@renesas.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sean Paul <sean@poorly.run>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Cc: Yixun Lan <dlan@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Vladimir Oltean (27):
ata: add <linux/pm_runtime.h> where missing
PCI: Add missing headers transitively included by <linux/phy/phy.h>
usb: add missing headers transitively included by <linux/phy/phy.h>
drm: add <linux/pm_runtime.h> where missing
phy: add <linux/pm_runtime.h> where missing
phy: spacemit: include missing <linux/phy/phy.h>
net: lan969x: include missing <linux/of.h>
PCI: Remove device links to PHY
scsi: ufs: exynos: stop poking into struct phy guts
scsi: ufs: qcom: keep parallel track of PHY power state
scsi: ufs: qcom: include missing <linux/interrupt.h>
drm/rockchip: dw_hdmi: avoid direct dereference of phy->dev.of_node
usb: host: tegra: avoid direct dereference of phy->dev.of_node
usb: gadget: tegra-xudc: avoid direct dereference of phy->dev.of_node
phy: move provider API out of public <linux/phy/phy.h>
phy: make phy_get_mode(), phy_(get|set)_bus_width() NULL tolerant
phy: introduce phy_get_max_link_rate() helper for consumers
drm/rockchip: dsi: include PHY provider header
drm: bridge: cdns-mhdp8546: use consumer API for getting PHY bus width
media: sunxi: a83-mips-csi2: include PHY provider header
net: renesas: rswitch: include PHY provider header
pinctrl: tegra-xusb: include PHY provider header
power: supply: cpcap-charger: include missing <linux/property.h>
phy: include PHY provider header (1/2)
phy: include PHY provider header (2/2)
phy: remove temporary provider compatibility from consumer header
MAINTAINERS: add regexes for linux-phy
MAINTAINERS | 11 +
drivers/ata/ahci.c | 1 +
drivers/ata/ahci_brcm.c | 1 +
drivers/ata/ahci_ceva.c | 1 +
drivers/ata/ahci_qoriq.c | 1 +
drivers/ata/libahci.c | 1 +
.../drm/bridge/analogix/analogix_dp_core.c | 1 +
.../drm/bridge/cadence/cdns-mhdp8546-core.c | 7 +-
drivers/gpu/drm/bridge/nwl-dsi.c | 1 +
drivers/gpu/drm/bridge/samsung-dsim.c | 1 +
drivers/gpu/drm/bridge/synopsys/dw-dp.c | 2 +-
drivers/gpu/drm/msm/dp/dp_aux.c | 1 +
drivers/gpu/drm/rockchip/cdn-dp-core.c | 1 +
.../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 1 +
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 25 +-
.../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c | 2 +-
drivers/net/can/at91_can.c | 3 +-
drivers/net/can/flexcan/flexcan-core.c | 3 +-
drivers/net/can/m_can/m_can_platform.c | 3 +-
drivers/net/can/rcar/rcar_canfd.c | 3 +-
.../microchip/sparx5/lan969x/lan969x_rgmii.c | 1 +
drivers/net/ethernet/renesas/rswitch_main.c | 1 +
.../controller/cadence/pcie-cadence-plat.c | 4 -
drivers/pci/controller/cadence/pcie-cadence.c | 16 +-
drivers/pci/controller/cadence/pcie-cadence.h | 2 -
drivers/pci/controller/dwc/pci-dra7xx.c | 16 -
drivers/pci/controller/dwc/pci-keystone.c | 32 +-
drivers/pci/controller/dwc/pcie-dw-rockchip.c | 1 +
drivers/pci/controller/dwc/pcie-histb.c | 1 +
drivers/pci/controller/dwc/pcie-qcom-ep.c | 1 +
drivers/pci/controller/dwc/pcie-spacemit-k1.c | 3 +
drivers/pci/controller/dwc/pcie-tegra194.c | 1 +
drivers/pci/controller/pci-tegra.c | 1 +
drivers/pci/controller/pcie-rockchip-host.c | 1 +
drivers/pci/controller/plda/pcie-starfive.c | 1 +
drivers/phy/allwinner/phy-sun4i-usb.c | 3 +-
drivers/phy/allwinner/phy-sun50i-usb3.c | 3 +-
drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 4 +-
drivers/phy/allwinner/phy-sun9i-usb.c | 3 +-
drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c | 2 +
.../amlogic/phy-meson-axg-mipi-pcie-analog.c | 3 +-
drivers/phy/amlogic/phy-meson-axg-pcie.c | 2 +
.../amlogic/phy-meson-g12a-mipi-dphy-analog.c | 3 +-
drivers/phy/amlogic/phy-meson-g12a-usb2.c | 2 +
.../phy/amlogic/phy-meson-g12a-usb3-pcie.c | 3 +-
drivers/phy/amlogic/phy-meson-gxl-usb2.c | 3 +-
drivers/phy/amlogic/phy-meson8-hdmi-tx.c | 3 +-
drivers/phy/amlogic/phy-meson8b-usb2.c | 3 +-
drivers/phy/apple/atc.c | 3 +-
drivers/phy/broadcom/phy-bcm-cygnus-pcie.c | 3 +-
drivers/phy/broadcom/phy-bcm-kona-usb2.c | 4 +-
drivers/phy/broadcom/phy-bcm-ns-usb2.c | 3 +-
drivers/phy/broadcom/phy-bcm-ns-usb3.c | 3 +-
drivers/phy/broadcom/phy-bcm-ns2-pcie.c | 3 +-
drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c | 3 +-
drivers/phy/broadcom/phy-bcm-sr-pcie.c | 3 +-
drivers/phy/broadcom/phy-bcm-sr-usb.c | 3 +-
drivers/phy/broadcom/phy-bcm63xx-usbh.c | 3 +-
drivers/phy/broadcom/phy-brcm-sata.c | 3 +-
drivers/phy/broadcom/phy-brcm-usb.c | 2 +-
drivers/phy/cadence/cdns-dphy-rx.c | 3 +-
drivers/phy/cadence/cdns-dphy.c | 4 +-
drivers/phy/cadence/phy-cadence-salvo.c | 3 +-
drivers/phy/cadence/phy-cadence-sierra.c | 3 +-
drivers/phy/cadence/phy-cadence-torrent.c | 3 +-
drivers/phy/canaan/phy-k230-usb.c | 3 +-
drivers/phy/eswin/phy-eic7700-sata.c | 3 +-
.../phy/freescale/phy-fsl-imx8-mipi-dphy.c | 3 +-
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 4 +-
drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 3 +-
drivers/phy/freescale/phy-fsl-imx8qm-hsio.c | 6 +-
.../phy/freescale/phy-fsl-imx8qm-lvds-phy.c | 3 +-
drivers/phy/freescale/phy-fsl-lynx-28g.c | 3 +-
drivers/phy/hisilicon/phy-hi3660-usb3.c | 3 +-
drivers/phy/hisilicon/phy-hi3670-pcie.c | 3 +-
drivers/phy/hisilicon/phy-hi3670-usb3.c | 3 +-
drivers/phy/hisilicon/phy-hi6220-usb.c | 3 +-
drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 4 +-
drivers/phy/hisilicon/phy-histb-combphy.c | 3 +-
drivers/phy/hisilicon/phy-hix5hd2-sata.c | 3 +-
drivers/phy/ingenic/phy-ingenic-usb.c | 3 +-
drivers/phy/intel/phy-intel-keembay-emmc.c | 3 +-
drivers/phy/intel/phy-intel-keembay-usb.c | 3 +-
drivers/phy/intel/phy-intel-lgm-combo.c | 4 +-
drivers/phy/intel/phy-intel-lgm-emmc.c | 3 +-
drivers/phy/lantiq/phy-lantiq-rcu-usb2.c | 3 +-
drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c | 4 +-
drivers/phy/marvell/phy-armada375-usb2.c | 3 +-
drivers/phy/marvell/phy-armada38x-comphy.c | 3 +-
drivers/phy/marvell/phy-berlin-sata.c | 3 +-
drivers/phy/marvell/phy-berlin-usb.c | 3 +-
drivers/phy/marvell/phy-mmp3-hsic.c | 3 +-
drivers/phy/marvell/phy-mmp3-usb.c | 3 +-
drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 3 +-
drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 3 +-
drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 3 +-
drivers/phy/marvell/phy-mvebu-cp110-utmi.c | 3 +-
drivers/phy/marvell/phy-mvebu-sata.c | 3 +-
drivers/phy/marvell/phy-pxa-28nm-hsic.c | 3 +-
drivers/phy/marvell/phy-pxa-28nm-usb2.c | 3 +-
drivers/phy/marvell/phy-pxa-usb.c | 3 +-
drivers/phy/mediatek/phy-mtk-dp.c | 3 +-
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 1 -
drivers/phy/mediatek/phy-mtk-hdmi.h | 3 +-
drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c | 2 +-
drivers/phy/mediatek/phy-mtk-mipi-dsi.h | 3 +-
drivers/phy/mediatek/phy-mtk-pcie.c | 2 +-
drivers/phy/mediatek/phy-mtk-tphy.c | 2 +-
drivers/phy/mediatek/phy-mtk-ufs.c | 2 +-
drivers/phy/mediatek/phy-mtk-xfi-tphy.c | 2 +-
drivers/phy/mediatek/phy-mtk-xsphy.c | 2 +-
drivers/phy/microchip/lan966x_serdes.c | 4 +-
drivers/phy/microchip/sparx5_serdes.c | 2 +-
drivers/phy/motorola/phy-cpcap-usb.c | 3 +-
drivers/phy/motorola/phy-mapphone-mdm6600.c | 5 +-
drivers/phy/mscc/phy-ocelot-serdes.c | 3 +-
drivers/phy/nuvoton/phy-ma35d1-usb2.c | 3 +-
drivers/phy/phy-airoha-pcie.c | 2 +-
drivers/phy/phy-can-transceiver.c | 3 +-
drivers/phy/phy-core-mipi-dphy.c | 4 +-
drivers/phy/phy-core.c | 52 ++
drivers/phy/phy-google-usb.c | 4 +-
drivers/phy/phy-lpc18xx-usb-otg.c | 3 +-
drivers/phy/phy-nxp-ptn3222.c | 3 +-
drivers/phy/phy-pistachio-usb.c | 4 +-
drivers/phy/phy-provider.h | 256 +++++++++
drivers/phy/phy-snps-eusb2.c | 2 +
drivers/phy/phy-xgene.c | 3 +-
drivers/phy/qualcomm/phy-ath79-usb.c | 3 +-
drivers/phy/qualcomm/phy-qcom-apq8064-sata.c | 3 +-
drivers/phy/qualcomm/phy-qcom-edp.c | 3 +-
.../phy/qualcomm/phy-qcom-eusb2-repeater.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 3 +-
drivers/phy/qualcomm/phy-qcom-m31-eusb2.c | 2 +
drivers/phy/qualcomm/phy-qcom-m31.c | 3 +-
drivers/phy/qualcomm/phy-qcom-pcie2.c | 3 +-
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 +-
.../phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 3 +-
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 3 +-
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 3 +-
.../phy/qualcomm/phy-qcom-qmp-usb-legacy.c | 4 +-
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 4 +-
drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 4 +-
drivers/phy/qualcomm/phy-qcom-qusb2.c | 5 +-
drivers/phy/qualcomm/phy-qcom-sgmii-eth.c | 3 +-
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 4 +-
.../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 3 +-
drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c | 3 +-
drivers/phy/qualcomm/phy-qcom-usb-hs.c | 3 +-
drivers/phy/qualcomm/phy-qcom-usb-hsic.c | 3 +-
drivers/phy/qualcomm/phy-qcom-usb-ss.c | 3 +-
drivers/phy/ralink/phy-mt7621-pci.c | 3 +-
drivers/phy/ralink/phy-ralink-usb.c | 3 +-
drivers/phy/realtek/phy-rtk-usb2.c | 3 +-
drivers/phy/realtek/phy-rtk-usb3.c | 3 +-
drivers/phy/renesas/phy-rcar-gen2.c | 3 +-
drivers/phy/renesas/phy-rcar-gen3-pcie.c | 4 +-
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 3 +-
drivers/phy/renesas/phy-rcar-gen3-usb3.c | 3 +-
drivers/phy/renesas/phy-rzg3e-usb3.c | 3 +-
drivers/phy/renesas/r8a779f0-ether-serdes.c | 4 +-
drivers/phy/rockchip/phy-rockchip-dp.c | 3 +-
drivers/phy/rockchip/phy-rockchip-dphy-rx0.c | 3 +-
drivers/phy/rockchip/phy-rockchip-emmc.c | 3 +-
.../phy/rockchip/phy-rockchip-inno-csidphy.c | 3 +-
.../phy/rockchip/phy-rockchip-inno-dsidphy.c | 4 +-
drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 2 +
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 3 +-
.../rockchip/phy-rockchip-naneng-combphy.c | 3 +-
drivers/phy/rockchip/phy-rockchip-pcie.c | 2 +-
.../phy/rockchip/phy-rockchip-samsung-dcphy.c | 3 +-
.../phy/rockchip/phy-rockchip-samsung-hdptx.c | 2 +
.../phy/rockchip/phy-rockchip-snps-pcie3.c | 3 +-
drivers/phy/rockchip/phy-rockchip-typec.c | 5 +-
drivers/phy/rockchip/phy-rockchip-usb.c | 3 +-
drivers/phy/rockchip/phy-rockchip-usbdp.c | 2 +
drivers/phy/samsung/phy-exynos-dp-video.c | 3 +-
drivers/phy/samsung/phy-exynos-mipi-video.c | 3 +-
drivers/phy/samsung/phy-exynos-pcie.c | 3 +-
drivers/phy/samsung/phy-exynos4210-usb2.c | 3 +-
drivers/phy/samsung/phy-exynos4x12-usb2.c | 3 +-
drivers/phy/samsung/phy-exynos5-usbdrd.c | 2 +
drivers/phy/samsung/phy-exynos5250-sata.c | 3 +-
drivers/phy/samsung/phy-exynos5250-usb2.c | 3 +-
drivers/phy/samsung/phy-s5pv210-usb2.c | 3 +-
drivers/phy/samsung/phy-samsung-ufs.c | 2 +-
drivers/phy/samsung/phy-samsung-ufs.h | 3 +-
drivers/phy/samsung/phy-samsung-usb2.c | 2 +
drivers/phy/samsung/phy-samsung-usb2.h | 3 +-
drivers/phy/socionext/phy-uniphier-ahci.c | 3 +-
drivers/phy/socionext/phy-uniphier-pcie.c | 3 +-
drivers/phy/socionext/phy-uniphier-usb2.c | 3 +-
drivers/phy/socionext/phy-uniphier-usb3hs.c | 3 +-
drivers/phy/socionext/phy-uniphier-usb3ss.c | 3 +-
drivers/phy/sophgo/phy-cv1800-usb2.c | 3 +-
drivers/phy/spacemit/phy-k1-pcie.c | 4 +-
drivers/phy/spacemit/phy-k1-usb2.c | 2 +
drivers/phy/st/phy-miphy28lp.c | 4 +-
drivers/phy/st/phy-spear1310-miphy.c | 3 +-
drivers/phy/st/phy-spear1340-miphy.c | 3 +-
drivers/phy/st/phy-stih407-usb.c | 3 +-
drivers/phy/st/phy-stm32-combophy.c | 3 +-
drivers/phy/st/phy-stm32-usbphyc.c | 2 +
drivers/phy/starfive/phy-jh7110-dphy-rx.c | 3 +-
drivers/phy/starfive/phy-jh7110-dphy-tx.c | 3 +-
drivers/phy/starfive/phy-jh7110-pcie.c | 3 +-
drivers/phy/starfive/phy-jh7110-usb.c | 3 +-
drivers/phy/sunplus/phy-sunplus-usb2.c | 3 +-
drivers/phy/tegra/phy-tegra194-p2u.c | 3 +-
drivers/phy/tegra/xusb-tegra124.c | 2 +-
drivers/phy/tegra/xusb-tegra186.c | 2 +-
drivers/phy/tegra/xusb-tegra210.c | 2 +-
drivers/phy/tegra/xusb.c | 2 +-
drivers/phy/ti/phy-am654-serdes.c | 3 +-
drivers/phy/ti/phy-da8xx-usb.c | 3 +-
drivers/phy/ti/phy-dm816x-usb.c | 3 +-
drivers/phy/ti/phy-gmii-sel.c | 3 +-
drivers/phy/ti/phy-omap-usb2.c | 3 +-
drivers/phy/ti/phy-ti-pipe3.c | 3 +-
drivers/phy/ti/phy-tusb1210.c | 1 +
drivers/phy/ti/phy-twl4030-usb.c | 3 +-
drivers/phy/xilinx/phy-zynqmp.c | 4 +-
drivers/pinctrl/tegra/pinctrl-tegra-xusb.c | 2 +-
drivers/power/supply/cpcap-charger.c | 1 +
drivers/ufs/host/ufs-exynos.c | 24 +-
drivers/ufs/host/ufs-exynos.h | 1 +
drivers/ufs/host/ufs-qcom.c | 16 +-
drivers/ufs/host/ufs-qcom.h | 1 +
drivers/usb/chipidea/ci_hdrc_imx.c | 1 +
drivers/usb/core/hcd.c | 1 +
drivers/usb/dwc3/dwc3-generic-plat.c | 1 +
drivers/usb/dwc3/dwc3-imx.c | 1 +
drivers/usb/dwc3/gadget.c | 1 +
drivers/usb/gadget/udc/tegra-xudc.c | 35 +-
drivers/usb/host/xhci-tegra.c | 42 +-
include/linux/phy/phy-props.h | 75 +++
include/linux/phy/phy-sun4i-usb.h | 2 +-
include/linux/phy/phy.h | 497 ++++--------------
include/linux/phy/tegra/xusb.h | 1 +
include/linux/phy/ulpi_phy.h | 2 +-
242 files changed, 1004 insertions(+), 721 deletions(-)
create mode 100644 drivers/phy/phy-provider.h
create mode 100644 include/linux/phy/phy-props.h
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply
* Re: [PATCH 2/2] phy: spacemit: Add USB3/PCIe comb PHY driver for Spacemit K3
From: Inochi Amaoto @ 2026-05-01 4:05 UTC (permalink / raw)
To: Ze Huang, Inochi Amaoto, Vinod Koul, Neil Armstrong, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Yixun Lan, Kees Cook,
Gustavo A. R. Silva, Paul Walmsley, Palmer Dabbelt, Albert Ou,
Alexandre Ghiti, Alex Elder
Cc: linux-phy, devicetree, linux-riscv, spacemit, linux-kernel,
linux-hardening, Yixun Lan, Longbin Li
In-Reply-To: <DI6BHTW4FFN1.2YLR7O1P8F0Y3@linux.dev>
On Thu, Apr 30, 2026 at 03:39:51PM +0800, Ze Huang wrote:
> On Thu Apr 30, 2026 at 10:28 AM CST, Inochi Amaoto wrote:
> > The comb PHY on K3 requires to configure a syscon device for the
> > right mux configuration. And it requires calibration before any
> > usage.
> >
> > Add USB3/PCIe comb PHY driver for Spacemit K3.
> >
> > Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
> > ---
> > drivers/phy/spacemit/Kconfig | 16 ++
> > drivers/phy/spacemit/Makefile | 2 +
> > drivers/phy/spacemit/phy-k3-combphy.c | 250 ++++++++++++++++
> > drivers/phy/spacemit/phy-k3-common.c | 398 ++++++++++++++++++++++++++
> > drivers/phy/spacemit/phy-k3-common.h | 27 ++
> > 5 files changed, 693 insertions(+)
> > create mode 100644 drivers/phy/spacemit/phy-k3-combphy.c
> > create mode 100644 drivers/phy/spacemit/phy-k3-common.c
> > create mode 100644 drivers/phy/spacemit/phy-k3-common.h
> >
> > diff --git a/drivers/phy/spacemit/Kconfig b/drivers/phy/spacemit/Kconfig
> > index 50b0005acf66..5fdf18fce499 100644
> > --- a/drivers/phy/spacemit/Kconfig
> > +++ b/drivers/phy/spacemit/Kconfig
> > @@ -23,3 +23,19 @@ config PHY_SPACEMIT_K1_USB2
> > help
> > Enable this to support K1 USB 2.0 PHY driver. This driver takes care of
> > enabling and clock setup and will be used by K1 udc/ehci/otg/xhci driver.
> > +
> > +config PHY_SPACEMIT_K3_COMMON_OPS
> > + tristate
> > + select MFD_SYSCON
> > + select GENERIC_PHY
> > +
> > +config PHY_SPACEMIT_K3_COMBO_PHY
> > + tristate "SpacemiT K3 USB3/PCIe PHY support"
> > + depends on (ARCH_SPACEMIT || COMPILE_TEST) && OF
> > + depends on COMMON_CLK
> > + select PHY_SPACEMIT_K3_COMMON_OPS
> > + help
> > + Enable this to support K3 USB3/PCIe combo PHY driver. This
> > + driver takes care of enabling and clock setup and will be used
> > + by K3 dwc3 driver.
> > + If unsure, say N.
> > diff --git a/drivers/phy/spacemit/Makefile b/drivers/phy/spacemit/Makefile
> > index a821a21d6142..41be7b0388da 100644
> > --- a/drivers/phy/spacemit/Makefile
> > +++ b/drivers/phy/spacemit/Makefile
> > @@ -1,3 +1,5 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> > obj-$(CONFIG_PHY_SPACEMIT_K1_PCIE) += phy-k1-pcie.o
> > obj-$(CONFIG_PHY_SPACEMIT_K1_USB2) += phy-k1-usb2.o
> > +obj-$(CONFIG_PHY_SPACEMIT_K3_COMBO_PHY) += phy-k3-combphy.o
> > +obj-$(CONFIG_PHY_SPACEMIT_K3_COMMON_OPS) += phy-k3-common.o
> > diff --git a/drivers/phy/spacemit/phy-k3-combphy.c b/drivers/phy/spacemit/phy-k3-combphy.c
> > new file mode 100644
> > index 000000000000..66fa6330ad6e
> > --- /dev/null
> > +++ b/drivers/phy/spacemit/phy-k3-combphy.c
> > @@ -0,0 +1,250 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * phy-k3-usb3.c - SpacemiT K3 Type-C Orientation Switch Driver
> > + *
> > + * Copyright (c) 2025 SpacemiT Technology Co. Ltd
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/io.h>
>
> ...
>
> > +
> > + phy->apb_spare = syscon_regmap_lookup_by_phandle(node, "spacemit,apb-spare");
> > + if (IS_ERR(phy->apb_spare))
> > + return dev_err_probe(dev, PTR_ERR(phy->apb_spare),
> > + "Failed to fine APB SPARE syscon");
>
> typo, s/fine/find
>
> > +
> > + apmu = syscon_regmap_lookup_by_phandle_args(node, "spacemit,apmu", 1, &config);
> > + if (IS_ERR(apmu))
> > + return dev_err_probe(dev, PTR_ERR(phy->apb_spare),
> > + "Failed to fine APMU syscon");
>
> 1. typo, s/fine/find
> 2. PTR_ERR(phy->apb_spare) should be PTR_ERR(apmu)
>
Thanks for pointing that
> > +
> > + ret = k3_comb_phy_update_config(apmu, config);
> > + if (ret < 0)
> > + return dev_err_probe(dev, ret, "Failed to set lane configuration");
> > +
> > + phy->dev = dev;
> > + platform_set_drvdata(pdev, phy);
> > +
> > + ret = k3_phy_calibrate(phy->apb_spare);
> > + if (ret < 0)
> > + return dev_err_probe(dev, ret, "Failed to calibrate phy");
> > +
> > + ret = k3_comb_phy_init_lanes(phy, config);
> > + if (ret < 0)
> > + return dev_err_probe(dev, ret, "Failed to init lanes");
> > +
> > + provider = devm_of_phy_provider_register(dev, k3_comb_phy_xlate);
> > + if (IS_ERR(provider))
> > + return dev_err_probe(dev, PTR_ERR(provider),
> > + "Failed to register provider\n");
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id k3_comb_phy_of_match[] = {
> > + { .compatible = "spacemit,k3-comb-phy" },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, k3_comb_phy_of_match);
> > +
> > +static struct platform_driver k3_comb_phy_driver = {
> > + .probe = k3_comb_phy_probe,
> > + .driver = {
> > + .name = "spacemit,k3-comb-phy",
> > + .of_match_table = k3_comb_phy_of_match,
> > + },
> > +};
> > +module_platform_driver(k3_comb_phy_driver);
> > +
> > +MODULE_DESCRIPTION("SpacemiT K3 USB3/PCIe comb PHY driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/phy/spacemit/phy-k3-common.c b/drivers/phy/spacemit/phy-k3-common.c
> > new file mode 100644
> > index 000000000000..77c4b4073b96
> > --- /dev/null
> > +++ b/drivers/phy/spacemit/phy-k3-common.c
> > @@ -0,0 +1,398 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/cleanup.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/module.h>
> > +#include <linux/regmap.h>
> > +#include <linux/usb.h>
> > +
> > +#include <dt-bindings/phy/phy.h>
> > +
> > +#include "phy-k3-common.h"
> > +
> > +/* PHY Registers */
> > +#define PHY_VERSION 0x0
> > +
> > +#define PHY_RESET_CFG 0x04
> > +
> > +#define PHY_RESET_RXBUF_RST BIT(0)
> > +#define PHY_RESET_SOFT_RST_PCS BIT(1)
> > +#define PHY_RESET_SOFT_RST_AHB BIT(2)
> > +#define PHY_RESET_EN_SD_AFTER_LOCK BIT(6)
> > +
> > +#define PHY_CLK_CFG 0x08
> > +
> > +#define PHY_CLK_PLL_READY BIT(0)
> > +#define PHY_CLK_TXCLK_INV BIT(2)
> > +#define PHY_CLK_RXCLK_EN BIT(3)
> > +#define PHY_CLK_TXCLK_EN BIT(4)
> > +#define PHY_CLK_PCLK_EN BIT(5)
> > +#define PHY_CLK_PIPE_PCLK_EN BIT(6)
> > +#define PHY_CLK_REFCLK_FREQ GENMASK(10, 7)
> > +#define PHY_CLK_REFCLK_24M 2
> > +#define PHY_CLK_SW_INIT_DONE BIT(11)
> > +#define PHY_CLK_PU_SSC_OUT BIT(23)
> > +
> > +#define PHY_MODE_CFG 0x0C
> > +
> > +#define PHY_MODE_PCIE_INT_EN BIT(0)
> > +#define PHY_MODE_LFPS_TPERIOD GENMASK(9, 8)
> > +#define PHY_MODE_LFPS_TPERIOD_USB 3
> > +
> > +#define PHY_PU_SEL 0x40
> > +
> > +#define PHY_PU_CFG_STATUS BIT(9)
> > +#define PHY_PU_OVRD_STATUS BIT(10)
> > +
> > +#define PHY_PU_CK_REG 0x54
> > +
> > +#define PHY_PU_REFCLK_100 BIT(25)
> > +
> > +#define PHY_PLL_REG1 0x58
> > +
> > +#define PHY_PLL_FREF_SEL GENMASK(15, 13)
> > +#define PHY_PLL_FREF_24M 0x1
> > +#define PHY_PLL_SSC_DEP_SEL GENMASK(27, 24)
> > +#define PHY_PLL_SSC_5000PPM 0xa
> > +#define PHY_PLL_SSC_MODE GENMASK(29, 28)
> > +#define PHY_PLL_SSC_MODE_CENTER_SPREAD 0
> > +#define PHY_PLL_SSC_MODE_UP_SPREAD 1
> > +#define PHY_PLL_SSC_MODE_DOWN_SPREAD 2
> > +#define PHY_PLL_SSC_MODE_DOWN_SPREAD1 3
> > +
> > +#define PHY_PLL_REG2 0x5c
> > +
> > +#define PHY_PLL_SEL_REF100 BIT(21)
> > +
> > +/* PHY RX Register Definitions */
> > +#define PHY_RX_REG_A 0x60
> > +
> > +#define PHY_RX_REG0_RLOAD BIT(4)
> > +#define PHY_RX_REG1_RTERM GENMASK(11, 8)
> > +#define PHY_RX_REG1_RC_CALI GENMASK(15, 12)
> > +#define PHY_RX_REG2_CSEL GENMASK(19, 16)
> > +#define PHY_RX_REG2_FORCE_CSEL BIT(20)
> > +#define PHY_RX_REG2_PSEL GENMASK(23, 21)
> > +#define PHY_RX_REG3_I_LOAD GENMASK(26, 24)
> > +#define PHY_RX_REG3_SEL_CBOOST_CODE BIT(27)
> > +#define PHY_RX_REG3_ADJ_BIAS GENMASK(29, 28)
> > +#define PHY_RX_REG3_RDEG1 GENMASK(31, 30)
> > +
> > +#define PHY_RX_REG_B 0x64
> > +
> > +#define PHY_RX_REGB_MASK GENMASK(23, 0)
> > +
> > +#define PHY_RX_REG4_RDEG2 GENMASK(2, 1)
> > +#define PHY_RX_REG4_ENVOS BIT(4)
> > +#define PHY_RX_REG4_RTERM_SEL BIT(5)
> > +#define PHY_RX_REG4_MANUAL_CFG BIT(7)
> > +#define PHY_RX_REG5_RCELL_VCM GENMASK(11, 8)
> > +#define PHY_RX_REG5_RCELL_BIAS GENMASK(15, 12)
> > +#define PHY_RX_REG6_H1_REG GENMASK(19, 16)
> > +#define PHY_RX_REG6_ADAPT_GAIN GENMASK(21, 20)
> > +#define PHY_RX_REG6_BYPASS_ADPT BIT(22)
> > +
> > +#define PHY_ADPT_CFG0 0x140
> > +#define PHY_ADPT_AFE_RST_OVRD_EN BIT(1)
> > +#define PHY_ADPT_AFE_RST_OVRD_VAL BIT(4)
> > +
> > +#define PHY_RXEQ_TIME 0xb4
> > +#define PHY_RXEQ_TIME_OVRD_POST_C_SOC BIT(21)
> > +#define PHY_RXEQ_TIME_CFG_AMP_SOC GENMASK(23, 22)
> > +#define PHY_RXEQ_TIME_AMP_SOC_650M 0
> > +#define PHY_RXEQ_TIME_AMP_SOC_800M 1
> > +#define PHY_RXEQ_TIME_AMP_SOC_870M 2
> > +#define PHY_RXEQ_TIME_AMP_SOC_900M 3
> > +#define PHY_RXEQ_TIME_OVRD_AMP_SOC BIT(24)
> > +
> > +#define PCIE_PU_ADDR_CLK_CFG 0x0008
> > +#define PHY_CLK_PLL_READY BIT(0)
> > +#define PCIE_INITAL_TIMER GENMASK(6, 3)
> > +#define CFG_INTERNAL_TIMER_ADJ GENMASK(10, 7)
> > +#define CFG_SW_PHY_INIT_DONE BIT(11)
> > +
> > +/* Lane RX/TX configuration (per‑lane, at lane_base) */
> > +#define PCIE_RX_REG1 0x050
> > +#define PCIE_TX_REG1 0x064
> > +
> > +#define PCIE_PLL_TIMEOUT 500000
> > +#define PCIE_POLL_DELAY 500
> > +
> > +
>
> ...
>
> > +static int k3_pcie_phy_init(struct phy *phy)
> > +{
> > + struct k3_lane_group *lg = phy_get_drvdata(phy);
> > + void __iomem *phy_base = lg->base + lg->data->offsets[0];
> > + u32 val;
> > + int ret;
> > + int i;
> > +
> > + val = readl(phy_base + PHY_PLL_REG1);
> > + val = u32_replace_bits(val, 0x2, GENMASK(15, 12));
> > + writel(val, phy_base + PHY_PLL_REG1);
> > +
> > + val = readl(phy_base + PHY_PLL_REG2);
> > + val = u32_replace_bits(val, 0, BIT(21));
> > + writel(val, phy_base + PHY_PLL_REG2);
> > +
> > + for (i = 0; i < lg->data->lanes; i++) {
> > + void __iomem *lane_base = lg->base + lg->data->offsets[i];
> > +
>
> > + val = readl(lane_base + PCIE_RX_REG1);
> > + val = u32_replace_bits(val, 0, 0x3);
> > + writel(val, phy_base + PCIE_RX_REG1);
>
> This looks like a copy-paste bug.
>
> Read from lane_base but write the modified value to phy_base.
>
Yes, it should be the lane_base.
> > + }
> > +
> > + val = readl(phy_base + PHY_PLL_REG2);
> > + val |= BIT(20);
> > + writel(val, phy_base + PHY_PLL_REG2);
> > +
>
> > + writel(0x00006505, phy_base + PCIE_RX_REG1);
>
> Is it intentional? The loop above configured PCIE_RX_REG1, while the
> hard-coded 0x00006505 overwrites what's done for lane0.
>
Yes, the logic is coming from vendor.
> > +
> > + /* pll_reg1 of lane0, disable SSC: pll_reg4[3:0] = 0 */
> > + val = readl(phy_base + PHY_PLL_REG1);
> > + val = u32_replace_bits(val, 0, GENMASK(27, 24));
> > + writel(val, phy_base + PHY_PLL_REG1);
>
> A little confusing here, comment says "pll_reg4[3:0] = 0" but the code is
> modifying PHY_PLL_REG1[27:24]
>
I think this is is a mistake from the vendor code. IIRC, the
reg4 may could be the [31:24]. As it is divided into four parts.
> > +
> > + for (i = 0; i < lg->data->lanes; i++) {
> > + void __iomem *lane_base = lg->base + lg->data->offsets[i];
> > +
> > + /* set cfg_tx_send_dummy_data to be 1'b1 for disable dash data */
> > + val = readl(lane_base + PHY_PU_SEL);
> > + val = u32_replace_bits(val, 1, BIT(13));
> > + writel(val, lane_base + PHY_PU_SEL);
> > +
> > + /* disable en_sample_data_after_cdr_locked */
> > + val = readl(lane_base + PHY_RESET_CFG);
> > + val = u32_replace_bits(val, 0, BIT(6));
> > + writel(val, lane_base + PHY_RESET_CFG);
> > +
> > + /* Dynamic Lock */
> > + val = readl(lane_base + PHY_MODE_CFG);
> > + val = u32_replace_bits(val, 1, BIT(2));
> > + writel(val, lane_base + PHY_MODE_CFG);
> > +
> > + val = FIELD_PREP(GENMASK(7, 0), 0x10) |
> > + FIELD_PREP(GENMASK(15, 8), 0x78) |
> > + FIELD_PREP(GENMASK(23, 16), 0x98) |
> > + FIELD_PREP(GENMASK(31, 24), 0xdf);
> > + writel(val, lane_base + PHY_RX_REG_A);
> > +
> > + val = readl(lane_base + PHY_RX_REG_B);
> > + val &= ~PHY_RX_REGB_MASK;
> > + val |= FIELD_PREP(GENMASK(7, 0), 0xb4) |
> > + FIELD_PREP(GENMASK(15, 8), 0x88) |
> > + FIELD_PREP(GENMASK(23, 16), 0x28);
> > + writel(val, lane_base + PHY_RX_REG_B);
>
> Can we define macros for these values? Just like you did for
> PHY_CLK_CFG.
>
We can, but I guess this makes no sense. As no detailed document
about these magic numbers, there is no meaningful name for
these numbers and fields.....
Regards,
Inochi
> > +
> > + /* Set init done */
> > + val = readl(lane_base + PCIE_PU_ADDR_CLK_CFG);
> > + val = u32_replace_bits(val, 1, CFG_SW_PHY_INIT_DONE);
> > + writel(val, lane_base + PCIE_PU_ADDR_CLK_CFG);
> > + }
> > +
> > + ret = readl_poll_timeout(phy_base + PCIE_PU_ADDR_CLK_CFG, val,
> > + (val & PHY_CLK_PLL_READY), PCIE_POLL_DELAY,
> > + PCIE_PLL_TIMEOUT);
> > + if (ret) {
> > + dev_err(&lg->phy->dev, "PHY PLL lock timeout\n");
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply
* Re: [PATCH v7 phy-next 17/27] phy: introduce phy_get_max_link_rate() helper for consumers
From: Vladimir Oltean @ 2026-04-30 13:14 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: linux-phy, Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Markus Schneider-Pargmann, Andrzej Hajda,
Robert Foss, Laurent Pinchart, Jonas Karlman, Jernej Skrabec,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, David Airlie,
Simona Vetter, Andy Yan, Marc Kleine-Budde, Vincent Mailhol,
Nicolas Ferre, Alexandre Belloni, Claudiu Beznea,
Geert Uytterhoeven, Magnus Damm
In-Reply-To: <CAMuHMdWbeeRmLf6Ae0Fr0un=-z7z5ONc_hDdjebP=KVkXHPbhw@mail.gmail.com>
On Thu, Apr 30, 2026 at 01:59:53PM +0200, Geert Uytterhoeven wrote:
> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # rcar_canfd
Thanks.
> > --- a/include/linux/phy/phy.h
> > +++ b/include/linux/phy/phy.h
> > @@ -57,6 +57,7 @@ int phy_notify_disconnect(struct phy *phy, int port);
> > int phy_notify_state(struct phy *phy, union phy_notify state);
> > int phy_get_bus_width(struct phy *phy);
> > void phy_set_bus_width(struct phy *phy, int bus_width);
> > +u32 phy_get_max_link_rate(struct phy *phy);
>
> This (and all the existing getters) should take a "const struct phy *".
Yeah... Let's see what other review comments pop up (including Sashiko,
which would be seeing this series for the first time) and decide
afterwards whether to make the argument const for the new getters as
part of a separate set, or in v8.
I don't think that modifying the existing getters is in scope for this
27 patch set.
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply
* Re: [PATCH v22 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver
From: Alexander Stein @ 2026-04-30 12:47 UTC (permalink / raw)
To: Luca Ceresoli, Laurentiu Palcu
Cc: Parshuram Thombare, Swapnil Jakhade, Dmitry Baryshkov,
Nikhil Devshatwar, Jayesh Choudhary, Andrzej Hajda,
Neil Armstrong, Robert Foss, Laurent Pinchart, Jonas Karlman,
Jernej Skrabec, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Simona Vetter, dri-devel,
devicetree, linux-kernel, linux-phy, imx, linux-arm-kernel, linux,
Ying Liu
In-Reply-To: <q7rze73ohtylj4jgtxun3cg6ih42crfs2u6tioby6yfqciemem@udrdm2g32fgn>
Hi,
Am Montag, 27. April 2026, 16:35:55 CEST schrieb Laurentiu Palcu:
> Hi Luca,
>
> [snip]
> >
> > Another question is whether this driver should have two compatible strings,
> > one for hdmi and one for dp, and set the bridge_type based on that. This
> > would make it a lot simpler and remove the need for this function.
>
> I think this is a good idea. I see no reason why having 2 different
> compatibles wouldn't work. I'll give it a try.
IIRC the original implementation of Sandor had two compatibles, essentially
duplicating lots of code for DP and HDMI. Maybe meanwhile with the rework the
duplication is gone and the different compatibles are feasible again.
Best regards,
Alexander
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply
* Re: [PATCH v7 phy-next 17/27] phy: introduce phy_get_max_link_rate() helper for consumers
From: Geert Uytterhoeven @ 2026-04-30 11:59 UTC (permalink / raw)
To: Vladimir Oltean
Cc: linux-phy, Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Markus Schneider-Pargmann, Andrzej Hajda,
Robert Foss, Laurent Pinchart, Jonas Karlman, Jernej Skrabec,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, David Airlie,
Simona Vetter, Andy Yan, Marc Kleine-Budde, Vincent Mailhol,
Nicolas Ferre, Alexandre Belloni, Claudiu Beznea,
Geert Uytterhoeven, Magnus Damm
In-Reply-To: <20260430110652.558622-18-vladimir.oltean@nxp.com>
Hi Vladimir,
On Thu, 30 Apr 2026 at 13:07, Vladimir Oltean <vladimir.oltean@nxp.com> wrote:
> Consumer drivers shouldn't dereference struct phy, not even to get to
> its attributes.
>
> We have phy_get_bus_width() as a precedent for getting the bus_width
> attribute, so let's add phy_get_max_link_rate() and use it in DRM and
> CAN drivers.
>
> In CAN drivers, the transceiver is acquired through devm_phy_optional_get()
> and NULL is given by the API as a non-error case, so the PHY API should
> also tolerate NULL coming back to it. This means we can further simplify
> the call sites that test for the NULL quality of the transceiver.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Acked-by: Markus Schneider-Pargmann <msp@baylibre.com> # m_can
Thanks for your patch!
> drivers/net/can/rcar/rcar_canfd.c | 3 +--
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # rcar_canfd
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -57,6 +57,7 @@ int phy_notify_disconnect(struct phy *phy, int port);
> int phy_notify_state(struct phy *phy, union phy_notify state);
> int phy_get_bus_width(struct phy *phy);
> void phy_set_bus_width(struct phy *phy, int bus_width);
> +u32 phy_get_max_link_rate(struct phy *phy);
This (and all the existing getters) should take a "const struct phy *".
> #else
> static inline struct phy *phy_get(struct device *dev, const char *string)
> {
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply
* [PATCH 5/5] phy: qcom: qmp-usbc: Add qmp configuration for Shikra
From: Komal Bajaj @ 2026-04-30 11:50 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Wesley Cheng, Vinod Koul, Neil Armstrong
Cc: linux-arm-msm, linux-usb, devicetree, linux-kernel, linux-phy,
Komal Bajaj, Krishna Kurapati
In-Reply-To: <20260430-shikra-usb-v1-0-c9c108536fdc@oss.qualcomm.com>
From: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Provide PHY configuration for the USB QMP PHY for Shikra.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index c342479a3798..400dcebf8222 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -2019,6 +2019,9 @@ static const struct of_device_id qmp_usbc_of_match_table[] = {
}, {
.compatible = "qcom,sdm660-qmp-usb3-phy",
.data = &sdm660_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,shikra-qmp-usb3-phy",
+ .data = &qcs615_usb3phy_cfg,
}, {
.compatible = "qcom,sm6115-qmp-usb3-phy",
.data = &qcm2290_usb3phy_cfg,
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH 3/5] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: Add support for Shikra
From: Komal Bajaj @ 2026-04-30 11:50 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Wesley Cheng, Vinod Koul, Neil Armstrong
Cc: linux-arm-msm, linux-usb, devicetree, linux-kernel, linux-phy,
Komal Bajaj, Krishna Kurapati
In-Reply-To: <20260430-shikra-usb-v1-0-c9c108536fdc@oss.qualcomm.com>
From: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Update dt-bindings to add Shikra to QMP Phy list.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
index 1636285fbe53..8402fe4a96e0 100644
--- a/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
@@ -20,6 +20,7 @@ properties:
- qcom,qcm2290-qmp-usb3-phy
- qcom,qcs615-qmp-usb3-phy
- qcom,sdm660-qmp-usb3-phy
+ - qcom,shikra-qmp-usb3-phy
- qcom,sm6115-qmp-usb3-phy
reg:
@@ -116,6 +117,7 @@ allOf:
contains:
enum:
- qcom,qcm2290-qmp-usb3-phy
+ - qcom,shikra-qmp-usb3-phy
- qcom,sm6115-qmp-usb3-phy
then:
properties:
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH 4/5] phy: qcom-qusb2: Add support for Shikra
From: Komal Bajaj @ 2026-04-30 11:50 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Wesley Cheng, Vinod Koul, Neil Armstrong
Cc: linux-arm-msm, linux-usb, devicetree, linux-kernel, linux-phy,
Komal Bajaj, Krishna Kurapati
In-Reply-To: <20260430-shikra-usb-v1-0-c9c108536fdc@oss.qualcomm.com>
From: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Add init sequence and phy configuration for Shikra.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index eb93015be841..ab7437e7b751 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -381,6 +381,19 @@ static const struct qusb2_phy_cfg sdm660_phy_cfg = {
.autoresume_en = BIT(3),
};
+static const struct qusb2_phy_cfg shikra_phy_cfg = {
+ .tbl = qcs615_init_tbl,
+ .tbl_num = ARRAY_SIZE(qcs615_init_tbl),
+ .regs = ipq6018_regs_layout,
+
+ .has_pll_test = true,
+ .se_clk_scheme_default = true,
+ .disable_ctrl = CLAMP_N_EN | FREEZIO_N | POWER_DOWN,
+ .mask_core_ready = PLL_LOCKED,
+ .autoresume_en = BIT(3),
+ .update_tune1_with_efuse = false,
+};
+
static const struct qusb2_phy_cfg sm6115_phy_cfg = {
.tbl = sm6115_init_tbl,
.tbl_num = ARRAY_SIZE(sm6115_init_tbl),
@@ -958,6 +971,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
}, {
.compatible = "qcom,sdm660-qusb2-phy",
.data = &sdm660_phy_cfg,
+ }, {
+ .compatible = "qcom,shikra-qusb2-phy",
+ .data = &shikra_phy_cfg,
}, {
.compatible = "qcom,sm4250-qusb2-phy",
.data = &sm6115_phy_cfg,
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH 2/5] dt-bindings: phy: qcom,qusb2: Document QUSB2 Phy for Shikra
From: Komal Bajaj @ 2026-04-30 11:50 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Wesley Cheng, Vinod Koul, Neil Armstrong
Cc: linux-arm-msm, linux-usb, devicetree, linux-kernel, linux-phy,
Komal Bajaj, Krishna Kurapati
In-Reply-To: <20260430-shikra-usb-v1-0-c9c108536fdc@oss.qualcomm.com>
From: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Update dt-bindings to add Shikra to QUSB2 Phy list.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index 39851ba9de43..ddbddeec6fb1 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -28,6 +28,7 @@ properties:
- qcom,qcm2290-qusb2-phy
- qcom,qcs615-qusb2-phy
- qcom,sdm660-qusb2-phy
+ - qcom,shikra-qusb2-phy
- qcom,sm4250-qusb2-phy
- qcom,sm6115-qusb2-phy
- items:
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH 1/5] dt-bindings: usb: qcom,snps-dwc3: Add Shikra compatible
From: Komal Bajaj @ 2026-04-30 11:50 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Wesley Cheng, Vinod Koul, Neil Armstrong
Cc: linux-arm-msm, linux-usb, devicetree, linux-kernel, linux-phy,
Komal Bajaj, Krishna Kurapati
In-Reply-To: <20260430-shikra-usb-v1-0-c9c108536fdc@oss.qualcomm.com>
From: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Introduce the compatible definition for Shikra QCOM SNPS DWC3.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
index 8201656b41ed..68d0491dc653 100644
--- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml
@@ -60,6 +60,7 @@ properties:
- qcom,sdx55-dwc3
- qcom,sdx65-dwc3
- qcom,sdx75-dwc3
+ - qcom,shikra-dwc3
- qcom,sm4250-dwc3
- qcom,sm6115-dwc3
- qcom,sm6125-dwc3
@@ -386,6 +387,7 @@ allOf:
compatible:
contains:
enum:
+ - qcom,shikra-dwc3
- qcom,sm8350-dwc3
then:
properties:
@@ -456,6 +458,7 @@ allOf:
- qcom,msm8996-dwc3
- qcom,qcs404-dwc3
- qcom,sdm660-dwc3
+ - qcom,shikra-dwc3
- qcom,sm4250-dwc3
- qcom,sm6115-dwc3
- qcom,sm6125-dwc3
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH 0/5] Add USB driver and binding changes for Qualcomm Shikra SoC
From: Komal Bajaj @ 2026-04-30 11:50 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Wesley Cheng, Vinod Koul, Neil Armstrong
Cc: linux-arm-msm, linux-usb, devicetree, linux-kernel, linux-phy,
Komal Bajaj, Krishna Kurapati
This series adds Driver and binding changes for USB controllers on
Shikra. There are two USB controllers - One of them is SS capable
and other is HS only capable. The ss Phy init sequence is same as
that of Talos.
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
---
Krishna Kurapati (5):
dt-bindings: usb: qcom,snps-dwc3: Add Shikra compatible
dt-bindings: phy: qcom,qusb2: Document QUSB2 Phy for Shikra
dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: Add support for Shikra
phy: qcom-qusb2: Add support for Shikra
phy: qcom: qmp-usbc: Add qmp configuration for Shikra
.../bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml | 2 ++
.../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 1 +
.../devicetree/bindings/usb/qcom,snps-dwc3.yaml | 3 +++
drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 3 +++
drivers/phy/qualcomm/phy-qcom-qusb2.c | 16 ++++++++++++++++
5 files changed, 25 insertions(+)
---
base-commit: 39704f00f747aba3144289870b5fd8ac230a9aaf
change-id: 20260430-shikra-usb-1fc0d3f9c117
Best regards,
--
Komal Bajaj <komal.bajaj@oss.qualcomm.com>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply
* [PATCH v7 phy-next 22/27] pinctrl: tegra-xusb: include PHY provider header
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Linus Walleij, Thierry Reding, Jonathan Hunter,
Krzysztof Kozlowski
In-Reply-To: <20260430110652.558622-1-vladimir.oltean@nxp.com>
The tegra-xusb pinctrl driver is also a PHY provider (calls
devm_phy_create() for PCIe and SATA). However, according to Vinod Koul,
having PHY provider drivers outside of drivers/phy/ is discouraged,
although it would be difficult for me to address a proper movement here.
Include the private provider API header from drivers/phy/, but leave a
FIXME in place. It will have to be moved, eventually.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
Cc: Linus Walleij <linusw@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
v2->v7: none
v1->v2: collect tag
---
drivers/pinctrl/tegra/pinctrl-tegra-xusb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
index c6a51bb21215..6b609bf685c7 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
@@ -7,7 +7,6 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/seq_file.h>
@@ -19,6 +18,7 @@
#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+#include "../../phy/phy-provider.h" /* FIXME */
#include "../core.h"
#include "../pinctrl-utils.h"
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH v7 phy-next 27/27] MAINTAINERS: add regexes for linux-phy
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Joe Perches
In-Reply-To: <20260430110652.558622-1-vladimir.oltean@nxp.com>
Some pragmatic shortcuts are being taken by PHY consumer driver authors,
which put a burden on the framework. A lot of these can be caught during
review.
Make sure the linux-phy list is copied on as many keywords that regexes
can reasonably catch.
Some considerations that led to this solution and not a simpler one:
- Consumers may be located anywhere, and their file naming provides no
indication whatsoever that they are PHY API consumers.
- The network PHY API has similarly sounding API: phy_start(),
phy_connect(), etc. Similarly, matching on "phy" would hit
phys_addr_t, "cryptography", etc.
- The header files themselves need attention to avoid matching on
include/linux/phy.h (network PHY), include/linux/usb/phy.h,
drivers/net/vendor/device/phy.h, etc.
- At least for a transitional period, I suppose developers will still
try to add PHY providers outside the subsystem (which is discouraged).
So I used \b to try to match on actual word boundaries and I went for
listing all markers of PHY API use as they may appear in patch contexts.
Bit rot is a valid concern. I will add a test to the build automation
that newly introduced struct and function names in include/linux/phy.h,
include/linux/phy-props.h and drivers/phy/phy-provider.h are matched by
the MAINTAINERS entry K: patterns.
The keyword patterns were written with great help from Joe Perches
<joe@perches.com>.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Joe Perches <joe@perches.com>
v3->v7: none
v2->v3:
- escape forward slash in linux/phy/phy.h in regex pattern:
https://lore.kernel.org/linux-phy/9fd14d166e860f26febfbc9061a6dcae6a166961.camel@perches.com/
v1->v2:
- split into multiple regex patterns
- use matching-only (insted of capturing) regex patterns
- adjust commit message to reflect the Q&A from v1
---
MAINTAINERS | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 2fb1c75afd16..032be68cc326 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10799,6 +10799,17 @@ F: Documentation/devicetree/bindings/phy/
F: drivers/phy/
F: include/dt-bindings/phy/
F: include/linux/phy/
+K: (?:linux\/phy\/phy\.h|phy-props\.h|phy-provider\.h)
+K: \b(?:__)?(?:devm_)?(?:of_)?phy_(?:create|destroy|provider_(?:un)?register)\b
+K: \bphy_(?:create|remove)_lookup\b
+K: \bphy_(?:get|set)_drvdata\b
+K: \b(?:devm_)?(?:of_)?phy_(?:optional_)?(?:get|put)(?:_by_index)?\b
+K: \bphy_pm_runtime_(?:get|put)(?:_sync)?\b
+K: \bphy_(?:init|exit|power_(?:on|off))\b
+K: \bphy_(?:get|set)_(?:mode(?:_ext)?|media|speed|bus_width|max_link_rate)\b
+K: \bphy_(?:reset|configure|validate|calibrate)\b
+K: \bphy_notify_(?:connect|disconnect|state)\b
+K: \bstruct\s+phy(?:_ops|_attrs|_lookup|_provider)?\b
GENERIC PINCTRL I2C DEMULTIPLEXER DRIVER
M: Wolfram Sang <wsa+renesas@sang-engineering.com>
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH v7 phy-next 21/27] net: renesas: rswitch: include PHY provider header
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Geert Uytterhoeven, Yoshihiro Shimoda,
Michael Dege, Andrew Lunn, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Russell King (Oracle)
In-Reply-To: <20260430110652.558622-1-vladimir.oltean@nxp.com>
As a PHY consumer driver, the Renesas rswitch dereferences internal
fields of struct phy, something which shouldn't be done, as that is
going to be made an opaque pointer.
It is quite clearly visible that the driver is tightly coupled with the
drivers/phy/renesas/r8a779f0-ether-serdes.c, which puts heavy pressure
on the Generic PHY subsystem.
This was discussed before here:
https://lore.kernel.org/linux-phy/20260211194541.cdmibrpfn6ej6e74@skbuf/
but to summarize, it is generally expected that when a Generic PHY
function is called, it takes effect immediately. When this doesn't
happen, the PHY provider driver must change its implementation rather
than the consumer be made to work around it. PHY providers which rely on
a hardcoded call sequence in the consumer are just lazy and wrong.
The most obvious example is commit 5cb630925b49 ("net: renesas: rswitch:
Add phy_power_{on,off}() calling"). Problem description:
- Ethernet PHYs may change phydev->interface. When this happens, the
SerDes must learn of the new phydev->interface using phy_set_mode_ext().
- drivers/phy/renesas/r8a779f0-ether-serdes.c implements phy_set_mode_ext(),
but this only caches the mode and submode into channel->phy_interface
and applies this to hardware during phy_power_on().
The commit author decided to work around this at the consumer site, by
power cycling the PHY for the configuration to take effect.
This had a worse implication from an API perspective in subsequent
commit 053f13f67be6 ("rswitch: Fix imbalance phy_power_off() calling").
It was observed that phy_power_on() and phy_power_off() calls need to be
balanced, and so, the consumer decided to start looking at the struct
phy :: power_count (the technical reason why I'm making this change).
This is also wrong from an API perspective because
- a consumer should only care about its own vote on the PHY power state.
If this is a multi-port submode like QSGMII, a single phy_power_off()
call will not actually turn the PHY off (nor should it).
- the power_count is written under the &phy->mutex, but read unlocked
here.
The rswitch and r8a779f0-ether-serdes drivers both need to be completely
rethought in terms of Generic PHY API call sequence. There is no quick
fix to apply. Just include the PHY provider API along with the consumer
one, to keep working as before when struct phy will be made an opaque
pointer to normal PHY consumers. But this is a bad offender (and it's
not even a provider) so add a FIXME.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Michael Dege <michael.dege@renesas.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
v2->v7: none
v1->v2: collect tag
---
drivers/net/ethernet/renesas/rswitch_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/renesas/rswitch_main.c b/drivers/net/ethernet/renesas/rswitch_main.c
index 6fe964816322..132be5f15073 100644
--- a/drivers/net/ethernet/renesas/rswitch_main.c
+++ b/drivers/net/ethernet/renesas/rswitch_main.c
@@ -27,6 +27,7 @@
#include <linux/spinlock.h>
#include <linux/sys_soc.h>
+#include "../../../phy/phy-provider.h" /* FIXME */
#include "rswitch.h"
#include "rswitch_l2.h"
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH v7 phy-next 24/27] phy: include PHY provider header (1/2)
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Chen-Yu Tsai
In-Reply-To: <20260430110652.558622-1-vladimir.oltean@nxp.com>
The majority of PHY drivers are PHY providers (obviously).
Some are providers *and* consumers (phy-meson-axg-mipi-dphy,
phy-meson-axg-pcie). These are the Amlogic AXG SoCs, which split the
physical layer into two chained PHYs: the digital layer and the analog
layer. The DSI or PCIe controller interacts only with the digital PHY,
presumably for simplicity.
The rest of PHY drivers which include <linux/phy/phy.h> do so because
they call phy_set_bus_width(), a consumer function.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org> # allwinner
---
v6->v7: removed conflict resolution details, conflicting patches are now
in linux-phy/next
v3->v6: none
v2->v3: add conflict resolution details
v1->v2: split in two parts to pass through linux-phy mailing list
moderation
---
drivers/phy/allwinner/phy-sun4i-usb.c | 3 ++-
drivers/phy/allwinner/phy-sun50i-usb3.c | 3 ++-
drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 4 ++--
drivers/phy/allwinner/phy-sun9i-usb.c | 3 ++-
drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c | 2 ++
drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c | 3 ++-
drivers/phy/amlogic/phy-meson-axg-pcie.c | 2 ++
drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c | 3 ++-
drivers/phy/amlogic/phy-meson-g12a-usb2.c | 2 ++
drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c | 3 ++-
drivers/phy/amlogic/phy-meson-gxl-usb2.c | 3 ++-
drivers/phy/amlogic/phy-meson8-hdmi-tx.c | 3 ++-
drivers/phy/amlogic/phy-meson8b-usb2.c | 3 ++-
drivers/phy/apple/atc.c | 3 ++-
drivers/phy/broadcom/phy-bcm-cygnus-pcie.c | 3 ++-
drivers/phy/broadcom/phy-bcm-kona-usb2.c | 4 +++-
drivers/phy/broadcom/phy-bcm-ns-usb2.c | 3 ++-
drivers/phy/broadcom/phy-bcm-ns-usb3.c | 3 ++-
drivers/phy/broadcom/phy-bcm-ns2-pcie.c | 3 ++-
drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c | 3 ++-
drivers/phy/broadcom/phy-bcm-sr-pcie.c | 3 ++-
drivers/phy/broadcom/phy-bcm-sr-usb.c | 3 ++-
drivers/phy/broadcom/phy-bcm63xx-usbh.c | 3 ++-
drivers/phy/broadcom/phy-brcm-sata.c | 3 ++-
drivers/phy/broadcom/phy-brcm-usb.c | 2 +-
drivers/phy/cadence/cdns-dphy-rx.c | 3 ++-
drivers/phy/cadence/cdns-dphy.c | 4 ++--
drivers/phy/cadence/phy-cadence-salvo.c | 3 ++-
drivers/phy/cadence/phy-cadence-sierra.c | 3 ++-
drivers/phy/cadence/phy-cadence-torrent.c | 3 ++-
drivers/phy/canaan/phy-k230-usb.c | 3 ++-
drivers/phy/eswin/phy-eic7700-sata.c | 3 ++-
drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c | 3 ++-
drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 4 ++--
drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 3 ++-
drivers/phy/freescale/phy-fsl-imx8qm-hsio.c | 6 +++---
drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c | 3 ++-
drivers/phy/freescale/phy-fsl-lynx-28g.c | 3 ++-
drivers/phy/hisilicon/phy-hi3660-usb3.c | 3 ++-
drivers/phy/hisilicon/phy-hi3670-pcie.c | 3 ++-
drivers/phy/hisilicon/phy-hi3670-usb3.c | 3 ++-
drivers/phy/hisilicon/phy-hi6220-usb.c | 3 ++-
drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 4 +++-
drivers/phy/hisilicon/phy-histb-combphy.c | 3 ++-
drivers/phy/hisilicon/phy-hix5hd2-sata.c | 3 ++-
drivers/phy/ingenic/phy-ingenic-usb.c | 3 ++-
drivers/phy/intel/phy-intel-keembay-emmc.c | 3 ++-
drivers/phy/intel/phy-intel-keembay-usb.c | 3 ++-
drivers/phy/intel/phy-intel-lgm-combo.c | 4 ++--
drivers/phy/intel/phy-intel-lgm-emmc.c | 3 ++-
drivers/phy/lantiq/phy-lantiq-rcu-usb2.c | 3 ++-
drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c | 4 ++--
drivers/phy/marvell/phy-armada375-usb2.c | 3 ++-
drivers/phy/marvell/phy-armada38x-comphy.c | 3 ++-
drivers/phy/marvell/phy-berlin-sata.c | 3 ++-
drivers/phy/marvell/phy-berlin-usb.c | 3 ++-
drivers/phy/marvell/phy-mmp3-hsic.c | 3 ++-
drivers/phy/marvell/phy-mmp3-usb.c | 3 ++-
drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 3 ++-
drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 3 ++-
drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 3 ++-
drivers/phy/marvell/phy-mvebu-cp110-utmi.c | 3 ++-
drivers/phy/marvell/phy-mvebu-sata.c | 3 ++-
drivers/phy/marvell/phy-pxa-28nm-hsic.c | 3 ++-
drivers/phy/marvell/phy-pxa-28nm-usb2.c | 3 ++-
drivers/phy/marvell/phy-pxa-usb.c | 3 ++-
drivers/phy/mediatek/phy-mtk-dp.c | 3 ++-
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 1 -
drivers/phy/mediatek/phy-mtk-hdmi.h | 3 ++-
drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c | 2 +-
drivers/phy/mediatek/phy-mtk-mipi-dsi.h | 3 ++-
drivers/phy/mediatek/phy-mtk-pcie.c | 2 +-
drivers/phy/mediatek/phy-mtk-tphy.c | 2 +-
drivers/phy/mediatek/phy-mtk-ufs.c | 2 +-
drivers/phy/mediatek/phy-mtk-xfi-tphy.c | 2 +-
drivers/phy/mediatek/phy-mtk-xsphy.c | 2 +-
drivers/phy/microchip/lan966x_serdes.c | 4 ++--
drivers/phy/microchip/sparx5_serdes.c | 2 +-
drivers/phy/motorola/phy-cpcap-usb.c | 3 ++-
drivers/phy/motorola/phy-mapphone-mdm6600.c | 4 +++-
drivers/phy/mscc/phy-ocelot-serdes.c | 3 ++-
drivers/phy/nuvoton/phy-ma35d1-usb2.c | 3 ++-
drivers/phy/phy-airoha-pcie.c | 2 +-
drivers/phy/phy-can-transceiver.c | 3 ++-
drivers/phy/phy-core-mipi-dphy.c | 4 ++--
drivers/phy/phy-core.c | 2 ++
drivers/phy/phy-google-usb.c | 3 ++-
drivers/phy/phy-lpc18xx-usb-otg.c | 3 ++-
drivers/phy/phy-nxp-ptn3222.c | 3 ++-
drivers/phy/phy-pistachio-usb.c | 4 ++--
drivers/phy/phy-snps-eusb2.c | 2 ++
drivers/phy/phy-xgene.c | 3 ++-
92 files changed, 177 insertions(+), 97 deletions(-)
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index e2fbf8ccf99e..9a03b5944b98 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -23,7 +23,6 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/phy/phy-sun4i-usb.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
@@ -33,6 +32,8 @@
#include <linux/usb/of.h>
#include <linux/workqueue.h>
+#include "../phy-provider.h"
+
#define REG_ISCR 0x00
#define REG_PHYCTL_A10 0x04
#define REG_PHYBIST 0x08
diff --git a/drivers/phy/allwinner/phy-sun50i-usb3.c b/drivers/phy/allwinner/phy-sun50i-usb3.c
index 363f9a0df503..d38b26e4bf95 100644
--- a/drivers/phy/allwinner/phy-sun50i-usb3.c
+++ b/drivers/phy/allwinner/phy-sun50i-usb3.c
@@ -18,10 +18,11 @@
#include <linux/io.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
/* Interface Status and Control Registers */
#define SUNXI_ISCR 0x00
#define SUNXI_PIPE_CLOCK_CONTROL 0x14
diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index 36eab95271b2..e96162d078eb 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -10,12 +10,12 @@
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of_address.h>
+#include <linux/phy/phy-mipi-dphy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../phy-provider.h"
#define SUN6I_DPHY_GCTL_REG 0x00
#define SUN6I_DPHY_GCTL_LANE_NUM(n) ((((n) - 1) & 3) << 4)
diff --git a/drivers/phy/allwinner/phy-sun9i-usb.c b/drivers/phy/allwinner/phy-sun9i-usb.c
index 2f9e60c188b8..f667f3f4b307 100644
--- a/drivers/phy/allwinner/phy-sun9i-usb.c
+++ b/drivers/phy/allwinner/phy-sun9i-usb.c
@@ -15,11 +15,12 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/usb/of.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define SUNXI_AHB_INCR16_BURST_EN BIT(11)
#define SUNXI_AHB_INCR8_BURST_EN BIT(10)
#define SUNXI_AHB_INCR4_BURST_EN BIT(9)
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
index c4a56b9d3289..60d17973a38f 100644
--- a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
@@ -20,6 +20,8 @@
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
/* [31] soft reset for the phy.
* 1: reset. 0: dessert the reset.
* [30] clock lane soft reset.
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
index c0ba2852dbb8..21e8e2a5563a 100644
--- a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
@@ -7,7 +7,6 @@
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/delay.h>
#include <linux/mfd/syscon.h>
@@ -15,6 +14,8 @@
#include <linux/platform_device.h>
#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
+
#define HHI_MIPI_CNTL0 0x00
#define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28)
#define HHI_MIPI_CNTL0_ENABLE BIT(29)
diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c
index 14dee73f9cb5..c4d9faf3a805 100644
--- a/drivers/phy/amlogic/phy-meson-axg-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c
@@ -13,6 +13,8 @@
#include <linux/bitfield.h>
#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
+
#define MESON_PCIE_REG0 0x00
#define MESON_PCIE_COMMON_CLK BIT(4)
#define MESON_PCIE_PORT_SEL GENMASK(3, 2)
diff --git a/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c b/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
index 46e5f7e7eb6c..11626f4528dd 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
@@ -9,7 +9,6 @@
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/delay.h>
#include <linux/mfd/syscon.h>
@@ -17,6 +16,8 @@
#include <linux/platform_device.h>
#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
+
#define HHI_MIPI_CNTL0 0x00
#define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(31, 16)
#define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0)
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
index 66bf0b7ef8ed..6e599b933153 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
@@ -20,6 +20,8 @@
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
#define PHY_CTRL_R0 0x0
#define PHY_CTRL_R1 0x4
#define PHY_CTRL_R2 0x8
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
index 5468831d6ab9..60e9c3c1c449 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -12,12 +12,13 @@
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/platform_device.h>
#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
+
#define PHY_R0 0x00
#define PHY_R0_PCIE_POWER_STATE GENMASK(4, 0)
#define PHY_R0_PCIE_USB3_SWITCH GENMASK(6, 5)
diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 6b390304f723..b8d5b12cffc8 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -12,9 +12,10 @@
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/reset.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
/* bits [31:27] are read-only */
#define U2P_R0 0x0
#define U2P_R0_BYPASS_SEL BIT(0)
diff --git a/drivers/phy/amlogic/phy-meson8-hdmi-tx.c b/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
index 2617f7f6c2ec..2a8c93dcda7e 100644
--- a/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
+++ b/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
@@ -11,11 +11,12 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/*
* Unfortunately there is no detailed documentation available for the
* HHI_HDMI_PHY_CNTL0 register. CTL0 and CTL1 is all we know about.
diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index a553231a9f7c..b288868b2d9e 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -14,10 +14,11 @@
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/reset.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/usb/of.h>
+#include "../phy-provider.h"
+
#define REG_CONFIG 0x00
#define REG_CONFIG_CLK_EN BIT(0)
#define REG_CONFIG_CLK_SEL_MASK GENMASK(3, 1)
diff --git a/drivers/phy/apple/atc.c b/drivers/phy/apple/atc.c
index e9d106f135c5..de9453d13c0e 100644
--- a/drivers/phy/apple/atc.c
+++ b/drivers/phy/apple/atc.c
@@ -32,7 +32,6 @@
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/soc/apple/tunable.h>
@@ -44,6 +43,8 @@
#include <linux/usb/typec_mux.h>
#include <linux/usb/typec_tbt.h>
+#include "../phy-provider.h"
+
#define AUSPLL_FSM_CTRL 0x1014
#define AUSPLL_APB_CMD_OVERRIDE 0x2000
diff --git a/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
index 462c61a24ec5..e10274f53c10 100644
--- a/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
@@ -5,9 +5,10 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
#define PCIE_CFG_OFFSET 0x00
#define PCIE1_PHY_IDDQ_SHIFT 10
#define PCIE0_PHY_IDDQ_SHIFT 2
diff --git a/drivers/phy/broadcom/phy-bcm-kona-usb2.c b/drivers/phy/broadcom/phy-bcm-kona-usb2.c
index e9cc5f2cb89a..356f42a08941 100644
--- a/drivers/phy/broadcom/phy-bcm-kona-usb2.c
+++ b/drivers/phy/broadcom/phy-bcm-kona-usb2.c
@@ -12,9 +12,11 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
+#include <linux/phy/phy.h> /* for phy_set_bus_width() */
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
#define OTGCTL (0)
#define OTGCTL_OTGSTAT2 BIT(31)
#define OTGCTL_OTGSTAT1 BIT(30)
diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb2.c b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
index c5d35031b398..95331d08b367 100644
--- a/drivers/phy/broadcom/phy-bcm-ns-usb2.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
@@ -13,11 +13,12 @@
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
struct bcm_ns_usb2 {
struct device *dev;
struct clk *ref_clk;
diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
index 6e56498d0644..f2aa4014f197 100644
--- a/drivers/phy/broadcom/phy-bcm-ns-usb3.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
@@ -19,10 +19,11 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
-#include <linux/phy/phy.h>
#include <linux/property.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
#define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f
#define BCM_NS_USB3_PHY_PLL30_BLOCK 0x8000
#define BCM_NS_USB3_PHY_TX_PMD_BLOCK 0x8040
diff --git a/drivers/phy/broadcom/phy-bcm-ns2-pcie.c b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
index 67a6ae5ecba0..9c2c603426ca 100644
--- a/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
@@ -6,7 +6,8 @@
#include <linux/of_mdio.h>
#include <linux/mdio.h>
#include <linux/phy.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
#define BLK_ADDR_REG_OFFSET 0x1f
#define PLL_AFE1_100MHZ_BLK 0x2100
diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
index 8473fa574529..7543211fb998 100644
--- a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
+++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
@@ -14,12 +14,13 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include "../phy-provider.h"
+
#define ICFG_DRD_AFE 0x0
#define ICFG_MISC_STAT 0x18
#define ICFG_DRD_P0CTL 0x1C
diff --git a/drivers/phy/broadcom/phy-bcm-sr-pcie.c b/drivers/phy/broadcom/phy-bcm-sr-pcie.c
index 706e1d83b4ce..8f4e44d1dea6 100644
--- a/drivers/phy/broadcom/phy-bcm-sr-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-pcie.c
@@ -9,10 +9,11 @@
#include <linux/module.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/* we have up to 8 PAXB based RC. The 9th one is always PAXC */
#define SR_NR_PCIE_PHYS 9
#define SR_PAXC_PHY_IDX (SR_NR_PCIE_PHYS - 1)
diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c
index 6bcfe83609c8..4c863738bdca 100644
--- a/drivers/phy/broadcom/phy-bcm-sr-usb.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c
@@ -8,9 +8,10 @@
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
enum bcm_usb_phy_version {
BCM_SR_USB_COMBO_PHY,
BCM_SR_USB_HS_PHY,
diff --git a/drivers/phy/broadcom/phy-bcm63xx-usbh.c b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
index 29fd6791bae6..63099da486c6 100644
--- a/drivers/phy/broadcom/phy-bcm63xx-usbh.c
+++ b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
@@ -18,10 +18,11 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
/* USBH control register offsets */
enum usbh_regs {
USBH_BRT_CONTROL1 = 0,
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index fb69e21a0292..ab826f9c8678 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -13,9 +13,10 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
#define SATA_PCB_BANK_OFFSET 0x23c
#define SATA_PCB_REG_OFFSET(ofs) ((ofs) * 4)
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index 59d756a10d6c..d660a0ed03ee 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -11,7 +11,6 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/soc/brcmstb/brcmstb.h>
@@ -19,6 +18,7 @@
#include <linux/mfd/syscon.h>
#include <linux/suspend.h>
+#include "../phy-provider.h"
#include "phy-brcm-usb-init.h"
static DEFINE_MUTEX(sysfs_lock);
diff --git a/drivers/phy/cadence/cdns-dphy-rx.c b/drivers/phy/cadence/cdns-dphy-rx.c
index 3ac80141189c..7097ac17443f 100644
--- a/drivers/phy/cadence/cdns-dphy-rx.c
+++ b/drivers/phy/cadence/cdns-dphy-rx.c
@@ -9,12 +9,13 @@
#include <linux/iopoll.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/phy/phy-mipi-dphy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/sys_soc.h>
+#include "../phy-provider.h"
+
#define DPHY_PMA_CMN(reg) (reg)
#define DPHY_PCS(reg) (0xb00 + (reg))
#define DPHY_ISO(reg) (0xc00 + (reg))
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
index d5b0e516b93c..40bc18405082 100644
--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -10,11 +10,11 @@
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/phy/phy-mipi-dphy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../phy-provider.h"
#define REG_WAKEUP_TIME_NS 800
#define DPHY_PLL_RATE_HZ 108000000
diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
index f461585c84c6..8ed74db50dfa 100644
--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -10,12 +10,13 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include "../phy-provider.h"
+
#define USB3_PHY_OFFSET 0x0
#define USB2_PHY_OFFSET 0x38000
/* USB3 PHY register definition */
diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index 92ab1a31646a..fb44b8fc5e3f 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -12,7 +12,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
@@ -23,6 +22,8 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/phy/phy-cadence.h>
+#include "../phy-provider.h"
+
#define NUM_SSC_MODE 3
#define NUM_PHY_TYPE 5
diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index d446a0f97688..974e12e34ae1 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -17,11 +17,12 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define REF_CLK_19_2MHZ 19200000
#define REF_CLK_25MHZ 25000000
#define REF_CLK_100MHZ 100000000
diff --git a/drivers/phy/canaan/phy-k230-usb.c b/drivers/phy/canaan/phy-k230-usb.c
index 52dad35fc6cf..4305763a5456 100644
--- a/drivers/phy/canaan/phy-k230-usb.c
+++ b/drivers/phy/canaan/phy-k230-usb.c
@@ -8,9 +8,10 @@
#include <linux/bitfield.h>
#include <linux/io.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
#define MAX_PHYS 2
/* Register offsets within the HiSysConfig system controller */
diff --git a/drivers/phy/eswin/phy-eic7700-sata.c b/drivers/phy/eswin/phy-eic7700-sata.c
index c33653d48daa..387d5c8c11d9 100644
--- a/drivers/phy/eswin/phy-eic7700-sata.c
+++ b/drivers/phy/eswin/phy-eic7700-sata.c
@@ -14,11 +14,12 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define SATA_AXI_LP_CTRL 0x08
#define SATA_MPLL_CTRL 0x20
#define SATA_P0_PHY_STAT 0x24
diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
index 0928a526e2ab..314aa227f753 100644
--- a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
@@ -16,11 +16,12 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <dt-bindings/firmware/imx/rsrc.h>
+#include "../phy-provider.h"
+
/* Control and Status Registers(CSR) */
#define PHY_CTRL 0x00
#define CCM_MASK GENMASK(7, 5)
diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index 7f5600103a00..6197cfc9b9a4 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -3,6 +3,7 @@
* Copyright 2021 NXP
*/
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
@@ -12,12 +13,11 @@
#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
-#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "../phy-provider.h"
#define IMX8MM_PCIE_PHY_CMN_REG061 0x184
#define ANA_PLL_CLK_OUT_TO_EXT_IO_EN BIT(0)
diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
index b05d80e849a1..9b938b446996 100644
--- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -7,11 +7,12 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/usb/typec_mux.h>
+#include "../phy-provider.h"
+
#define PHY_CTRL0 0x0
#define PHY_CTRL0_REF_SSP_EN BIT(2)
#define PHY_CTRL0_FSEL_MASK GENMASK(10, 5)
diff --git a/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c b/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c
index 279b8ac7822d..b274fd24b59a 100644
--- a/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c
+++ b/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c
@@ -3,6 +3,8 @@
* Copyright 2024 NXP
*/
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
@@ -11,13 +13,11 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pci_regs.h>
-#include <linux/phy/phy.h>
#include <linux/phy/pcie.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "../phy-provider.h"
#define MAX_NUM_LANE 3
#define LANE_NUM_CLKS 5
diff --git a/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
index ece357443521..55c23bef5121 100644
--- a/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
@@ -9,12 +9,13 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/units.h>
+#include "../phy-provider.h"
+
#define REG_SET 0x4
#define REG_CLR 0x8
diff --git a/drivers/phy/freescale/phy-fsl-lynx-28g.c b/drivers/phy/freescale/phy-fsl-lynx-28g.c
index 63427fc34e26..38862c9c6c94 100644
--- a/drivers/phy/freescale/phy-fsl-lynx-28g.c
+++ b/drivers/phy/freescale/phy-fsl-lynx-28g.c
@@ -5,10 +5,11 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/workqueue.h>
+#include "../phy-provider.h"
+
#define LYNX_28G_NUM_LANE 8
#define LYNX_28G_NUM_PLL 2
diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c
index e2a09d67faed..b66ff3be1aed 100644
--- a/drivers/phy/hisilicon/phy-hi3660-usb3.c
+++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c
@@ -12,10 +12,11 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define PERI_CRG_CLK_EN4 0x40
#define PERI_CRG_CLK_DIS4 0x44
#define GT_CLK_USB3OTG_REF BIT(0)
diff --git a/drivers/phy/hisilicon/phy-hi3670-pcie.c b/drivers/phy/hisilicon/phy-hi3670-pcie.c
index dbc7dcce682b..b7cf44078e0d 100644
--- a/drivers/phy/hisilicon/phy-hi3670-pcie.c
+++ b/drivers/phy/hisilicon/phy-hi3670-pcie.c
@@ -26,11 +26,12 @@
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/types.h>
+#include "../phy-provider.h"
+
#define AXI_CLK_FREQ 207500000
#define REF_CLK_FREQ 100000000
diff --git a/drivers/phy/hisilicon/phy-hi3670-usb3.c b/drivers/phy/hisilicon/phy-hi3670-usb3.c
index 40d3cf128b44..004c51500597 100644
--- a/drivers/phy/hisilicon/phy-hi3670-usb3.c
+++ b/drivers/phy/hisilicon/phy-hi3670-usb3.c
@@ -14,10 +14,11 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define SCTRL_SCDEEPSLEEPED (0x0)
#define USB_CLK_SELECTED BIT(20)
diff --git a/drivers/phy/hisilicon/phy-hi6220-usb.c b/drivers/phy/hisilicon/phy-hi6220-usb.c
index 22d8d8a8dabe..1b5a2d3e3e44 100644
--- a/drivers/phy/hisilicon/phy-hi6220-usb.c
+++ b/drivers/phy/hisilicon/phy-hi6220-usb.c
@@ -8,9 +8,10 @@
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define SC_PERIPH_CTRL4 0x00c
#define CTRL4_PICO_SIDDQ BIT(6)
diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
index c843923252aa..4a4701d0fc9c 100644
--- a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
+++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
@@ -10,10 +10,12 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
+#include <linux/phy/phy.h> /* for phy_set_bus_width() */
#include <linux/platform_device.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define INNO_PHY_PORT_NUM 2
#define REF_CLK_STABLE_TIME 100 /* unit:us */
#define UTMI_CLK_STABLE_TIME 200 /* unit:us */
diff --git a/drivers/phy/hisilicon/phy-histb-combphy.c b/drivers/phy/hisilicon/phy-histb-combphy.c
index 9dd0bd00b4e4..9b6ed1644d74 100644
--- a/drivers/phy/hisilicon/phy-histb-combphy.c
+++ b/drivers/phy/hisilicon/phy-histb-combphy.c
@@ -14,12 +14,13 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
+
#define COMBPHY_MODE_PCIE 0
#define COMBPHY_MODE_USB3 1
#define COMBPHY_MODE_SATA 2
diff --git a/drivers/phy/hisilicon/phy-hix5hd2-sata.c b/drivers/phy/hisilicon/phy-hix5hd2-sata.c
index 1b26ddb4c8a7..57994f69417d 100644
--- a/drivers/phy/hisilicon/phy-hix5hd2-sata.c
+++ b/drivers/phy/hisilicon/phy-hix5hd2-sata.c
@@ -9,10 +9,11 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define SATA_PHY0_CTLL 0xa0
#define MPLL_MULTIPLIER_SHIFT 1
#define MPLL_MULTIPLIER_MASK 0xfe
diff --git a/drivers/phy/ingenic/phy-ingenic-usb.c b/drivers/phy/ingenic/phy-ingenic-usb.c
index 7e62d46850fd..d656f97729c4 100644
--- a/drivers/phy/ingenic/phy-ingenic-usb.c
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
@@ -12,10 +12,11 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
+#include "../phy-provider.h"
+
/* OTGPHY register offsets */
#define REG_USBPCR_OFFSET 0x00
#define REG_USBRDT_OFFSET 0x04
diff --git a/drivers/phy/intel/phy-intel-keembay-emmc.c b/drivers/phy/intel/phy-intel-keembay-emmc.c
index 0eb11ac7c2e2..fdba1d050439 100644
--- a/drivers/phy/intel/phy-intel-keembay-emmc.c
+++ b/drivers/phy/intel/phy-intel-keembay-emmc.c
@@ -11,10 +11,11 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/* eMMC/SD/SDIO core/phy configuration registers */
#define PHY_CFG_0 0x24
#define SEL_DLY_TXCLK_MASK BIT(29)
diff --git a/drivers/phy/intel/phy-intel-keembay-usb.c b/drivers/phy/intel/phy-intel-keembay-usb.c
index c8b05f7b2445..4e690f3eb560 100644
--- a/drivers/phy/intel/phy-intel-keembay-usb.c
+++ b/drivers/phy/intel/phy-intel-keembay-usb.c
@@ -10,10 +10,11 @@
#include <linux/delay.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/* USS (USB Subsystem) clock control registers */
#define USS_CPR_CLK_EN 0x00
#define USS_CPR_CLK_SET 0x04
diff --git a/drivers/phy/intel/phy-intel-lgm-combo.c b/drivers/phy/intel/phy-intel-lgm-combo.c
index 9ee3cf61cdd0..2a8b0caa0e59 100644
--- a/drivers/phy/intel/phy-intel-lgm-combo.c
+++ b/drivers/phy/intel/phy-intel-lgm-combo.c
@@ -5,6 +5,7 @@
* Copyright (C) 2019-2020 Intel Corporation.
*/
+#include <dt-bindings/phy/phy.h>
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/iopoll.h>
@@ -12,12 +13,11 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
#define PCIE_PHY_GEN_CTRL 0x00
#define PCIE_PHY_CLK_PAD BIT(17)
diff --git a/drivers/phy/intel/phy-intel-lgm-emmc.c b/drivers/phy/intel/phy-intel-lgm-emmc.c
index 703aeb122541..479a530dd630 100644
--- a/drivers/phy/intel/phy-intel-lgm-emmc.c
+++ b/drivers/phy/intel/phy-intel-lgm-emmc.c
@@ -11,10 +11,11 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/* eMMC phy register definitions */
#define EMMC_PHYCTRL0_REG 0xa8
#define DR_TY_MASK GENMASK(30, 28)
diff --git a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
index 82f1ffc0b0ad..eb6c201f7c87 100644
--- a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
+++ b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
@@ -12,12 +12,13 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
/* Transmitter HS Pre-Emphasis Enable */
#define RCU_CFG1_TX_PEE BIT(0)
/* Disconnect Threshold */
diff --git a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
index 406a87c8b759..70da76399e30 100644
--- a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
+++ b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
@@ -11,6 +11,7 @@
* TODO: PHY modes other than 36MHz (without "SSC")
*/
+#include <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/clk.h>
@@ -18,13 +19,12 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/reset.h>
-#include <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
+#include "../phy-provider.h"
#define PCIE_PHY_PLL_CTRL1 0x44
diff --git a/drivers/phy/marvell/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c
index 3731f9b25655..d5c100096c3d 100644
--- a/drivers/phy/marvell/phy-armada375-usb2.c
+++ b/drivers/phy/marvell/phy-armada375-usb2.c
@@ -16,9 +16,10 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
#define USB2_PHY_CONFIG_DISABLE BIT(0)
struct armada375_cluster_phy {
diff --git a/drivers/phy/marvell/phy-armada38x-comphy.c b/drivers/phy/marvell/phy-armada38x-comphy.c
index 5063361b0120..9653863f90bb 100644
--- a/drivers/phy/marvell/phy-armada38x-comphy.c
+++ b/drivers/phy/marvell/phy-armada38x-comphy.c
@@ -9,10 +9,11 @@
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
#define MAX_A38X_COMPHY 6
#define MAX_A38X_PORTS 3
diff --git a/drivers/phy/marvell/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c
index c90e2867900c..4d4013d115ca 100644
--- a/drivers/phy/marvell/phy-berlin-sata.c
+++ b/drivers/phy/marvell/phy-berlin-sata.c
@@ -10,10 +10,11 @@
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
#define HOST_VSA_ADDR 0x0
#define HOST_VSA_DATA 0x4
#define PORT_SCR_CTL 0x2c
diff --git a/drivers/phy/marvell/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c
index f26bf630da2c..a3e58deaaa74 100644
--- a/drivers/phy/marvell/phy-berlin-usb.c
+++ b/drivers/phy/marvell/phy-berlin-usb.c
@@ -9,11 +9,12 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define USB_PHY_PLL 0x04
#define USB_PHY_PLL_CONTROL 0x08
#define USB_PHY_TX_CTRL0 0x10
diff --git a/drivers/phy/marvell/phy-mmp3-hsic.c b/drivers/phy/marvell/phy-mmp3-hsic.c
index 72ab6da0ebc3..90498211431b 100644
--- a/drivers/phy/marvell/phy-mmp3-hsic.c
+++ b/drivers/phy/marvell/phy-mmp3-hsic.c
@@ -7,9 +7,10 @@
#include <linux/io.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
#define HSIC_CTRL 0x08
#define HSIC_ENABLE BIT(7)
#define PLL_BYPASS BIT(4)
diff --git a/drivers/phy/marvell/phy-mmp3-usb.c b/drivers/phy/marvell/phy-mmp3-usb.c
index 5b71deb08851..ba67bcc2c3f9 100644
--- a/drivers/phy/marvell/phy-mmp3-usb.c
+++ b/drivers/phy/marvell/phy-mmp3-usb.c
@@ -8,10 +8,11 @@
#include <linux/io.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/soc/mmp/cputype.h>
+#include "../phy-provider.h"
+
#define USB2_PLL_REG0 0x4
#define USB2_PLL_REG1 0x8
#define USB2_TX_REG0 0x10
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
index 1d1db1737422..3acfd74c3eca 100644
--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
@@ -21,10 +21,11 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
+#include "../phy-provider.h"
+
#define PLL_SET_DELAY_US 600
#define COMPHY_PLL_SLEEP 1000
#define COMPHY_PLL_TIMEOUT 150000
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
index 04f4fb4bed70..c17ce28ceb0b 100644
--- a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
+++ b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
@@ -14,10 +14,11 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/* Armada 3700 UTMI PHY registers */
#define USB2_PHY_PLL_CTRL_REG0 0x0
#define PLL_REF_DIV_OFF 0
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index 71f9c14fb50d..18ad172135ea 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -13,10 +13,11 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/* Relative to priv->base */
#define MVEBU_COMPHY_SERDES_CFG0(n) (0x0 + (n) * 0x1000)
#define MVEBU_COMPHY_SERDES_CFG0_PU_PLL BIT(1)
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-utmi.c b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
index dd3e515a8e86..f3e2ef54c37b 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
@@ -13,12 +13,13 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/usb/of.h>
#include <linux/usb/otg.h>
+#include "../phy-provider.h"
+
#define UTMI_PHY_PORTS 2
/* CP110 UTMI register macro definetions */
diff --git a/drivers/phy/marvell/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c
index 89a5a2b69d80..b9a9eca74789 100644
--- a/drivers/phy/marvell/phy-mvebu-sata.c
+++ b/drivers/phy/marvell/phy-mvebu-sata.c
@@ -8,11 +8,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
-#include <linux/phy/phy.h>
#include <linux/io.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
struct priv {
struct clk *clk;
void __iomem *base;
diff --git a/drivers/phy/marvell/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
index eff6dd6b2dd0..6feee8d1ca70 100644
--- a/drivers/phy/marvell/phy-pxa-28nm-hsic.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
@@ -17,7 +17,8 @@
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
#define PHY_28NM_HSIC_CTRL 0x08
#define PHY_28NM_HSIC_IMPCAL_CAL 0x18
diff --git a/drivers/phy/marvell/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
index 64afb82cf70e..39b8344803cb 100644
--- a/drivers/phy/marvell/phy-pxa-28nm-usb2.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
@@ -17,7 +17,8 @@
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
/* USB PXA1928 PHY mapping */
#define PHY_28NM_PLL_REG0 0x0
diff --git a/drivers/phy/marvell/phy-pxa-usb.c b/drivers/phy/marvell/phy-pxa-usb.c
index c0bb71f80c04..9a8ab813d001 100644
--- a/drivers/phy/marvell/phy-pxa-usb.c
+++ b/drivers/phy/marvell/phy-pxa-usb.c
@@ -10,9 +10,10 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
/* phy regs */
#define UTMI_REVISION 0x0
#define UTMI_CTRL 0x4
diff --git a/drivers/phy/mediatek/phy-mtk-dp.c b/drivers/phy/mediatek/phy-mtk-dp.c
index d7024a144335..ab3778447570 100644
--- a/drivers/phy/mediatek/phy-mtk-dp.c
+++ b/drivers/phy/mediatek/phy-mtk-dp.c
@@ -10,10 +10,11 @@
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define PHY_OFFSET 0x1000
#define MTK_DP_PHY_DIG_PLL_CTL_1 (PHY_OFFSET + 0x14)
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
index 1426a2db984d..30015bac3f73 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
@@ -7,7 +7,6 @@
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi.h b/drivers/phy/mediatek/phy-mtk-hdmi.h
index 99d917e0036a..bfddd8dbe9dd 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi.h
+++ b/drivers/phy/mediatek/phy-mtk-hdmi.h
@@ -11,12 +11,13 @@
#include <linux/delay.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/types.h>
+#include "../phy-provider.h"
+
struct mtk_hdmi_phy;
struct mtk_hdmi_phy_conf {
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
index 058e1d926630..5e008204ecca 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
@@ -12,10 +12,10 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
#include "phy-mtk-io.h"
#include "phy-mtk-mipi-csi-0-5-rx-reg.h"
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.h b/drivers/phy/mediatek/phy-mtk-mipi-dsi.h
index 5d4876f1dc95..676c8f78d9d6 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.h
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.h
@@ -13,9 +13,10 @@
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/platform_device.h>
-#include <linux/phy/phy.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
struct mtk_mipitx_data {
const u32 mppll_preserve;
const struct clk_ops *mipi_tx_clk_ops;
diff --git a/drivers/phy/mediatek/phy-mtk-pcie.c b/drivers/phy/mediatek/phy-mtk-pcie.c
index a2f69d6c72f0..1ab7c1dc2753 100644
--- a/drivers/phy/mediatek/phy-mtk-pcie.c
+++ b/drivers/phy/mediatek/phy-mtk-pcie.c
@@ -8,10 +8,10 @@
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
#include "phy-mtk-io.h"
#define PEXTP_ANA_GLB_00_REG 0x9000
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index acf506529507..6f98de067327 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -15,10 +15,10 @@
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
#include "phy-mtk-io.h"
/* version V1 sub-banks offset base address */
diff --git a/drivers/phy/mediatek/phy-mtk-ufs.c b/drivers/phy/mediatek/phy-mtk-ufs.c
index 0cb5a25b1b7a..de517fcc4f3e 100644
--- a/drivers/phy/mediatek/phy-mtk-ufs.c
+++ b/drivers/phy/mediatek/phy-mtk-ufs.c
@@ -9,9 +9,9 @@
#include <linux/io.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
#include "phy-mtk-io.h"
/* mphy register and offsets */
diff --git a/drivers/phy/mediatek/phy-mtk-xfi-tphy.c b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
index 100a50d0e861..036a4bb58dcf 100644
--- a/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
@@ -17,8 +17,8 @@
#include <linux/clk.h>
#include <linux/reset.h>
#include <linux/phy.h>
-#include <linux/phy/phy.h>
+#include "../phy-provider.h"
#include "phy-mtk-io.h"
#define MTK_XFI_TPHY_NUM_CLOCKS 2
diff --git a/drivers/phy/mediatek/phy-mtk-xsphy.c b/drivers/phy/mediatek/phy-mtk-xsphy.c
index c0ddb9273cc3..5e61abddaf54 100644
--- a/drivers/phy/mediatek/phy-mtk-xsphy.c
+++ b/drivers/phy/mediatek/phy-mtk-xsphy.c
@@ -14,10 +14,10 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
#include "phy-mtk-io.h"
/* u2 phy banks */
diff --git a/drivers/phy/microchip/lan966x_serdes.c b/drivers/phy/microchip/lan966x_serdes.c
index 835e369cdfc5..8769518f9708 100644
--- a/drivers/phy/microchip/lan966x_serdes.c
+++ b/drivers/phy/microchip/lan966x_serdes.c
@@ -1,15 +1,15 @@
// SPDX-License-Identifier: GPL-2.0-or-later
+#include <dt-bindings/phy/phy-lan966x-serdes.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
-#include <dt-bindings/phy/phy-lan966x-serdes.h>
#include "lan966x_serdes_regs.h"
+#include "../phy-provider.h"
#define PLL_CONF_MASK GENMASK(4, 3)
#define PLL_CONF_25MHZ 0
diff --git a/drivers/phy/microchip/sparx5_serdes.c b/drivers/phy/microchip/sparx5_serdes.c
index 320cf5b50a8c..09c22a6a2639 100644
--- a/drivers/phy/microchip/sparx5_serdes.c
+++ b/drivers/phy/microchip/sparx5_serdes.c
@@ -17,8 +17,8 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/phy.h>
-#include <linux/phy/phy.h>
+#include "../phy-provider.h"
#include "sparx5_serdes.h"
#define SPX5_SERDES_10G_START 13
diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c
index 7cb020dd3423..66a834c208fc 100644
--- a/drivers/phy/motorola/phy-cpcap-usb.c
+++ b/drivers/phy/motorola/phy-cpcap-usb.c
@@ -24,10 +24,11 @@
#include <linux/gpio/consumer.h>
#include <linux/mfd/motorola-cpcap.h>
#include <linux/phy/omap_usb.h>
-#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/usb/musb.h>
+#include "../phy-provider.h"
+
/* CPCAP_REG_USBC1 register bits */
#define CPCAP_BIT_IDPULSE BIT(15)
#define CPCAP_BIT_ID100KPU BIT(14)
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index ce1dad8c438d..92f63e52bd1d 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -15,10 +15,12 @@
#include <linux/gpio/consumer.h>
#include <linux/of_platform.h>
-#include <linux/phy/phy.h>
+#include <linux/phy/phy.h> /* for phy_pm_runtime_*() */
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
+#include "../phy-provider.h"
+
#define PHY_MDM6600_PHY_DELAY_MS 4000 /* PHY enable 2.2s to 3.5s */
#define PHY_MDM6600_ENABLED_DELAY_MS 8000 /* 8s more total for MDM6600 */
#define PHY_MDM6600_WAKE_KICK_MS 600 /* time on after GPIO toggle */
diff --git a/drivers/phy/mscc/phy-ocelot-serdes.c b/drivers/phy/mscc/phy-ocelot-serdes.c
index 1cd1b5db2ad7..13f83876d954 100644
--- a/drivers/phy/mscc/phy-ocelot-serdes.c
+++ b/drivers/phy/mscc/phy-ocelot-serdes.c
@@ -12,12 +12,13 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <soc/mscc/ocelot_hsio.h>
#include <dt-bindings/phy/phy-ocelot-serdes.h>
+#include "../phy-provider.h"
+
struct serdes_ctrl {
struct regmap *regs;
struct device *dev;
diff --git a/drivers/phy/nuvoton/phy-ma35d1-usb2.c b/drivers/phy/nuvoton/phy-ma35d1-usb2.c
index 9a459b700ed4..520c86188fe2 100644
--- a/drivers/phy/nuvoton/phy-ma35d1-usb2.c
+++ b/drivers/phy/nuvoton/phy-ma35d1-usb2.c
@@ -10,10 +10,11 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/* USB PHY Miscellaneous Control Register */
#define MA35_SYS_REG_USBPMISCR 0x60
#define PHY0POR BIT(0) /* PHY Power-On Reset Control Bit */
diff --git a/drivers/phy/phy-airoha-pcie.c b/drivers/phy/phy-airoha-pcie.c
index 56e9ade8a9fd..d9817eed2631 100644
--- a/drivers/phy/phy-airoha-pcie.c
+++ b/drivers/phy/phy-airoha-pcie.c
@@ -9,11 +9,11 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "phy-airoha-pcie-regs.h"
+#include "phy-provider.h"
#define LEQ_LEN_CTRL_MAX_VAL 7
#define FREQ_LOCK_MAX_ATTEMPT 10
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index 2b52e47f247a..68f771a7bad7 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -6,13 +6,14 @@
*
*/
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/mux/consumer.h>
+#include "phy-provider.h"
+
struct can_transceiver_data {
u32 flags;
#define CAN_TRANSCEIVER_STB_PRESENT BIT(0)
diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c
index f4956a417a47..770cfe2a2279 100644
--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
@@ -4,13 +4,13 @@
* Copyright (C) 2018 Cadence Design Systems Inc.
*/
+#include <linux/phy/phy-mipi-dphy.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/time64.h>
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "phy-provider.h"
/*
* Minimum D-PHY timings based on MIPI D-PHY specification. Derived
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 737a760d97d1..02af89ee64a3 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -20,6 +20,8 @@
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
+#include "phy-provider.h"
+
#define to_phy(a) (container_of((a), struct phy, dev))
/**
diff --git a/drivers/phy/phy-google-usb.c b/drivers/phy/phy-google-usb.c
index 48cfa2e28347..539732f4869e 100644
--- a/drivers/phy/phy-google-usb.c
+++ b/drivers/phy/phy-google-usb.c
@@ -14,13 +14,14 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/usb/typec_mux.h>
+#include "phy-provider.h"
+
#define USBCS_USB2PHY_CFG19_OFFSET 0x0
#define USBCS_USB2PHY_CFG19_PHY_CFG_PLL_FB_DIV GENMASK(19, 8)
diff --git a/drivers/phy/phy-lpc18xx-usb-otg.c b/drivers/phy/phy-lpc18xx-usb-otg.c
index f905d3c64584..554dfa55fe7e 100644
--- a/drivers/phy/phy-lpc18xx-usb-otg.c
+++ b/drivers/phy/phy-lpc18xx-usb-otg.c
@@ -10,10 +10,11 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "phy-provider.h"
+
/* USB OTG PHY register offset and bit in CREG */
#define LPC18XX_CREG_CREG0 0x004
#define LPC18XX_CREG_CREG0_USB0PHY BIT(5)
diff --git a/drivers/phy/phy-nxp-ptn3222.c b/drivers/phy/phy-nxp-ptn3222.c
index c6179d8701e6..ae75b760a30d 100644
--- a/drivers/phy/phy-nxp-ptn3222.c
+++ b/drivers/phy/phy-nxp-ptn3222.c
@@ -7,10 +7,11 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
+#include "phy-provider.h"
+
#define NUM_SUPPLIES 2
struct ptn3222 {
diff --git a/drivers/phy/phy-pistachio-usb.c b/drivers/phy/phy-pistachio-usb.c
index 231792f48ced..8eed6f505a31 100644
--- a/drivers/phy/phy-pistachio-usb.c
+++ b/drivers/phy/phy-pistachio-usb.c
@@ -5,6 +5,7 @@
* Copyright (C) 2015 Google, Inc.
*/
+#include <dt-bindings/phy/phy-pistachio-usb.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
@@ -12,11 +13,10 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
-#include <dt-bindings/phy/phy-pistachio-usb.h>
+#include "phy-provider.h"
#define USB_PHY_CONTROL1 0x04
#define USB_PHY_CONTROL1_FSEL_SHIFT 2
diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c
index f90bf7e95463..9062737bfad4 100644
--- a/drivers/phy/phy-snps-eusb2.c
+++ b/drivers/phy/phy-snps-eusb2.c
@@ -13,6 +13,8 @@
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
+#include "phy-provider.h"
+
#define EXYNOS_USB_PHY_HS_PHY_CTRL_RST (0x0)
#define USB_PHY_RST_MASK GENMASK(1, 0)
#define UTMI_PORT_RST_MASK GENMASK(5, 4)
diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c
index 5007dc7a357c..90a00498ec0a 100644
--- a/drivers/phy/phy-xgene.c
+++ b/drivers/phy/phy-xgene.c
@@ -43,9 +43,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <linux/phy/phy.h>
#include <linux/clk.h>
+#include "phy-provider.h"
+
/* Max 2 lanes per a PHY unit */
#define MAX_LANE 2
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH v7 phy-next 25/27] phy: include PHY provider header (2/2)
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Dmitry Baryshkov, Shawn Lin
In-Reply-To: <20260430110652.558622-1-vladimir.oltean@nxp.com>
The majority of PHY drivers are PHY providers (obviously).
Some are chained PHY provider+consumer (phy-qcom-m31-eusb2.c,
phy-exynos5-usbdrd.c).
Others include <linux/phy/phy.h> because they call consumer functions
such as phy_pm_runtime_get() - phy-mapphone-mdm6600.c. See commit
2ad2af081622 ("phy: mapphone-mdm6600: Improve phy related runtime PM
calls") for the story behind that. My understanding is it's a pragmatic
shortcut, but it doesn't bother much.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> #phy/qualcomm
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
---
v6->v7:
- manually resolved conflict in
drivers/phy/qualcomm/phy-qcom-sgmii-eth.c with commit 4ff5801f45b4
("phy: qcom-sgmii-eth: add .set_mode() and .validate() methods"), now
present in linux-phy/next.
v4->v6: none
v3->v4:
- fix phy-provider.h path from drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
- make sure include/linux/phy/tegra/xusb.h is not reliant upon an
external "struct phy" definition
v2->v3: none
v1->v2: split in two parts to pass through linux-phy mailing list
moderation. The split is at letter 'q' (Qualcomm)
---
drivers/phy/qualcomm/phy-ath79-usb.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-apq8064-sata.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-edp.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-m31-eusb2.c | 2 ++
drivers/phy/qualcomm/phy-qcom-m31.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-pcie2.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-qusb2.c | 4 ++--
drivers/phy/qualcomm/phy-qcom-sgmii-eth.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-usb-hs.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-usb-hsic.c | 3 ++-
drivers/phy/qualcomm/phy-qcom-usb-ss.c | 3 ++-
drivers/phy/ralink/phy-mt7621-pci.c | 3 ++-
drivers/phy/ralink/phy-ralink-usb.c | 3 ++-
drivers/phy/realtek/phy-rtk-usb2.c | 3 ++-
drivers/phy/realtek/phy-rtk-usb3.c | 3 ++-
drivers/phy/renesas/phy-rcar-gen2.c | 3 ++-
drivers/phy/renesas/phy-rcar-gen3-pcie.c | 3 ++-
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 3 ++-
drivers/phy/renesas/phy-rcar-gen3-usb3.c | 3 ++-
drivers/phy/renesas/phy-rzg3e-usb3.c | 3 ++-
drivers/phy/renesas/r8a779f0-ether-serdes.c | 3 ++-
drivers/phy/rockchip/phy-rockchip-dp.c | 3 ++-
drivers/phy/rockchip/phy-rockchip-dphy-rx0.c | 3 ++-
drivers/phy/rockchip/phy-rockchip-emmc.c | 3 ++-
drivers/phy/rockchip/phy-rockchip-inno-csidphy.c | 3 ++-
drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c | 4 ++--
drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 2 ++
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 3 ++-
drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 3 ++-
drivers/phy/rockchip/phy-rockchip-pcie.c | 2 +-
drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c | 3 ++-
drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 2 ++
drivers/phy/rockchip/phy-rockchip-snps-pcie3.c | 3 ++-
drivers/phy/rockchip/phy-rockchip-typec.c | 4 ++--
drivers/phy/rockchip/phy-rockchip-usb.c | 3 ++-
drivers/phy/rockchip/phy-rockchip-usbdp.c | 2 ++
drivers/phy/samsung/phy-exynos-dp-video.c | 3 ++-
drivers/phy/samsung/phy-exynos-mipi-video.c | 3 ++-
drivers/phy/samsung/phy-exynos-pcie.c | 3 ++-
drivers/phy/samsung/phy-exynos4210-usb2.c | 3 ++-
drivers/phy/samsung/phy-exynos4x12-usb2.c | 3 ++-
drivers/phy/samsung/phy-exynos5-usbdrd.c | 2 ++
drivers/phy/samsung/phy-exynos5250-sata.c | 3 ++-
drivers/phy/samsung/phy-exynos5250-usb2.c | 3 ++-
drivers/phy/samsung/phy-s5pv210-usb2.c | 3 ++-
drivers/phy/samsung/phy-samsung-ufs.c | 2 +-
drivers/phy/samsung/phy-samsung-ufs.h | 3 ++-
drivers/phy/samsung/phy-samsung-usb2.c | 2 ++
drivers/phy/samsung/phy-samsung-usb2.h | 3 ++-
drivers/phy/socionext/phy-uniphier-ahci.c | 3 ++-
drivers/phy/socionext/phy-uniphier-pcie.c | 3 ++-
drivers/phy/socionext/phy-uniphier-usb2.c | 3 ++-
drivers/phy/socionext/phy-uniphier-usb3hs.c | 3 ++-
drivers/phy/socionext/phy-uniphier-usb3ss.c | 3 ++-
drivers/phy/sophgo/phy-cv1800-usb2.c | 3 ++-
drivers/phy/spacemit/phy-k1-pcie.c | 4 ++--
drivers/phy/spacemit/phy-k1-usb2.c | 3 ++-
drivers/phy/st/phy-miphy28lp.c | 4 ++--
drivers/phy/st/phy-spear1310-miphy.c | 3 ++-
drivers/phy/st/phy-spear1340-miphy.c | 3 ++-
drivers/phy/st/phy-stih407-usb.c | 3 ++-
drivers/phy/st/phy-stm32-combophy.c | 3 ++-
drivers/phy/st/phy-stm32-usbphyc.c | 2 ++
drivers/phy/starfive/phy-jh7110-dphy-rx.c | 3 ++-
drivers/phy/starfive/phy-jh7110-dphy-tx.c | 3 ++-
drivers/phy/starfive/phy-jh7110-pcie.c | 3 ++-
drivers/phy/starfive/phy-jh7110-usb.c | 3 ++-
drivers/phy/sunplus/phy-sunplus-usb2.c | 3 ++-
drivers/phy/tegra/phy-tegra194-p2u.c | 3 ++-
drivers/phy/tegra/xusb-tegra124.c | 2 +-
drivers/phy/tegra/xusb-tegra186.c | 2 +-
drivers/phy/tegra/xusb-tegra210.c | 2 +-
drivers/phy/tegra/xusb.c | 2 +-
drivers/phy/ti/phy-am654-serdes.c | 3 ++-
drivers/phy/ti/phy-da8xx-usb.c | 3 ++-
drivers/phy/ti/phy-dm816x-usb.c | 3 ++-
drivers/phy/ti/phy-gmii-sel.c | 3 ++-
drivers/phy/ti/phy-omap-usb2.c | 3 ++-
drivers/phy/ti/phy-ti-pipe3.c | 3 ++-
drivers/phy/ti/phy-twl4030-usb.c | 3 ++-
drivers/phy/xilinx/phy-zynqmp.c | 4 ++--
include/linux/phy/phy-sun4i-usb.h | 2 +-
include/linux/phy/tegra/xusb.h | 1 +
include/linux/phy/ulpi_phy.h | 2 +-
98 files changed, 187 insertions(+), 96 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-ath79-usb.c b/drivers/phy/qualcomm/phy-ath79-usb.c
index f8d0199c6e78..2f07241be600 100644
--- a/drivers/phy/qualcomm/phy-ath79-usb.c
+++ b/drivers/phy/qualcomm/phy-ath79-usb.c
@@ -8,9 +8,10 @@
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/phy/phy.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
struct ath79_usb_phy {
struct reset_control *reset;
/* The suspend override logic is inverted, hence the no prefix
diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
index cae290a6e19f..dd73ecbb6c1e 100644
--- a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
@@ -13,7 +13,8 @@
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
/* PHY registers */
#define UNIPHY_PLL_REFCLK_CFG 0x000
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 7372de05a0b8..faddba0f20c7 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/phy/phy-dp.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
@@ -22,6 +21,8 @@
#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
+
#include "phy-qcom-qmp-dp-phy.h"
#include "phy-qcom-qmp-qserdes-com-v4.h"
#include "phy-qcom-qmp-qserdes-com-v6.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index efeec4709a15..5783bdabc287 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -8,7 +8,8 @@
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
/* eUSB2 status registers */
#define EUSB2_RPTR_STATUS 0x08
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
index da6f290af722..f1c1c2969e37 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
@@ -14,10 +14,11 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
struct ipq4019_usb_phy {
struct device *dev;
struct phy *phy;
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
index f5eb0bdac418..d5407784c18f 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
@@ -13,7 +13,8 @@
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
struct qcom_ipq806x_sata_phy {
void __iomem *mmio;
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
index f22c0000479f..54144f0547f0 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
@@ -5,13 +5,14 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/bitfield.h>
+#include "../phy-provider.h"
+
/* USB QSCRATCH Hardware registers */
#define QSCRATCH_GENERAL_CFG (0x08)
#define HSUSB_PHY_CTRL_REG (0x10)
diff --git a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
index 68f1ba8fec4a..9e3a911023cd 100644
--- a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
@@ -18,6 +18,8 @@
#include <linux/regulator/consumer.h>
+#include "../phy-provider.h"
+
#define USB_PHY_UTMI_CTRL0 (0x3c)
#define SLEEPM BIT(0)
diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c
index 168ea980fda0..1a63a5807d37 100644
--- a/drivers/phy/qualcomm/phy-qcom-m31.c
+++ b/drivers/phy/qualcomm/phy-qcom-m31.c
@@ -10,11 +10,12 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
#define USB2PHY_PORT_UTMI_CTRL1 0x40
#define USB2PHY_PORT_UTMI_CTRL2 0x44
diff --git a/drivers/phy/qualcomm/phy-qcom-pcie2.c b/drivers/phy/qualcomm/phy-qcom-pcie2.c
index 11a2bb958681..4c74d8e7722d 100644
--- a/drivers/phy/qualcomm/phy-qcom-pcie2.c
+++ b/drivers/phy/qualcomm/phy-qcom-pcie2.c
@@ -8,11 +8,12 @@
#include <linux/clk.h>
#include <linux/iopoll.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
#include <dt-bindings/phy/phy.h>
#define PCIE20_PARF_PHY_STTS 0x3c
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index b9ea7d058e93..04c54c229f08 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -14,7 +14,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_graph.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
@@ -28,6 +27,8 @@
#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include "../phy-provider.h"
+
#include "phy-qcom-qmp-common.h"
#include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
index a7c65cfe31df..df38d5b6d5be 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
@@ -13,12 +13,13 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
#include "phy-qcom-qmp-common.h"
#include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index fed2fc9bb311..06680151360e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -15,7 +15,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/phy/pcie.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
@@ -24,6 +23,8 @@
#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include "../phy-provider.h"
+
#include "phy-qcom-qmp-common.h"
#include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 771bc7c2ab50..8fda189774e6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -13,7 +13,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
@@ -21,6 +20,8 @@
#include <ufs/unipro.h>
+#include "../phy-provider.h"
+
#include "phy-qcom-qmp-common.h"
#include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
index 2bd5862c5ba8..a682b30db03e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
@@ -14,13 +14,14 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
#include "phy-qcom-qmp.h"
#include "phy-qcom-qmp-pcs-misc-v3.h"
#include "phy-qcom-qmp-pcs-usb-v4.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index d88b8a415e85..3db0a5282dbf 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -13,13 +13,14 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
#include "phy-qcom-qmp-common.h"
#include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index f62e1f6ecc07..b77007f8fee3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -14,7 +14,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
@@ -25,6 +24,8 @@
#include <linux/usb/typec_mux.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include "../phy-provider.h"
+
#include "phy-qcom-qmp-common.h"
#include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 191040f6d60f..e5516099b911 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -3,6 +3,7 @@
* Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved.
*/
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
@@ -12,7 +13,6 @@
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
@@ -20,7 +20,7 @@
#include <linux/reset.h>
#include <linux/slab.h>
-#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include "../phy-provider.h"
#define QUSB2PHY_PLL 0x0
#define QUSB2PHY_PLL_TEST 0x04
diff --git a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
index f48faa2929a6..9886500e0272 100644
--- a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
+++ b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
@@ -8,10 +8,11 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#include "phy-qcom-qmp-pcs-sgmii.h"
#include "phy-qcom-qmp-qserdes-com-v5.h"
#include "phy-qcom-qmp-qserdes-txrx-v5.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 8915fa250e81..17a33e545008 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
@@ -18,6 +17,8 @@
#include <linux/reset.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
#define USB2_PHY_USB_PHY_UTMI_CTRL0 (0x3c)
#define SLEEPM BIT(0)
#define OPMODE_MASK GENMASK(4, 3)
diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
index 324c0a5d658e..13828d4f788e 100644
--- a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
+++ b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
@@ -12,12 +12,13 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/units.h>
+#include "../phy-provider.h"
+
#define RST_ASSERT_DELAY_MIN_US 100
#define RST_ASSERT_DELAY_MAX_US 150
#define PIPE_CLK_DELAY_MIN_US 5000
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
index a52a9bf13b75..ce317deaeacb 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
@@ -11,12 +11,13 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_graph.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
/* PHY register and bit definitions */
#define PHY_CTRL_COMMON0 0x078
#define SIDDQ BIT(2)
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
index 98a18987f1be..95581926023f 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
@@ -8,11 +8,12 @@
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/reset.h>
#include <linux/extcon.h>
#include <linux/notifier.h>
+#include "../phy-provider.h"
+
#define ULPI_PWR_CLK_MNG_REG 0x88
# define ULPI_PWR_OTG_COMP_DISABLE BIT(0)
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hsic.c b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
index 20f6dd37c7c1..fe9315a2f207 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
@@ -5,12 +5,13 @@
#include <linux/module.h>
#include <linux/ulpi/driver.h>
#include <linux/ulpi/regs.h>
-#include <linux/phy/phy.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/pinctrl-state.h>
#include <linux/delay.h>
#include <linux/clk.h>
+#include "../phy-provider.h"
+
#define ULPI_HSIC_CFG 0x30
#define ULPI_HSIC_IO_CAL 0x33
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-ss.c b/drivers/phy/qualcomm/phy-qcom-usb-ss.c
index a3a6d3ce7ea1..17ca14a0b34d 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-ss.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-ss.c
@@ -11,12 +11,13 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
#define PHY_CTRL0 0x6C
#define PHY_CTRL1 0x70
#define PHY_CTRL2 0x74
diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c
index a591ad95347c..4865a264136d 100644
--- a/drivers/phy/ralink/phy-mt7621-pci.c
+++ b/drivers/phy/ralink/phy-mt7621-pci.c
@@ -10,11 +10,12 @@
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/sys_soc.h>
+#include "../phy-provider.h"
+
#define RG_PE1_PIPE_REG 0x02c
#define RG_PE1_PIPE_RST BIT(12)
#define RG_PE1_PIPE_CMD_FRC BIT(4)
diff --git a/drivers/phy/ralink/phy-ralink-usb.c b/drivers/phy/ralink/phy-ralink-usb.c
index 0ff07e210769..cc61139ce157 100644
--- a/drivers/phy/ralink/phy-ralink-usb.c
+++ b/drivers/phy/ralink/phy-ralink-usb.c
@@ -14,11 +14,12 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define RT_SYSC_REG_SYSCFG1 0x014
#define RT_SYSC_REG_CLKCFG1 0x030
#define RT_SYSC_REG_USB_PHY_CFG 0x05c
diff --git a/drivers/phy/realtek/phy-rtk-usb2.c b/drivers/phy/realtek/phy-rtk-usb2.c
index 248550ef98ca..a0431f11972e 100644
--- a/drivers/phy/realtek/phy-rtk-usb2.c
+++ b/drivers/phy/realtek/phy-rtk-usb2.c
@@ -16,9 +16,10 @@
#include <linux/regmap.h>
#include <linux/sys_soc.h>
#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
#include <linux/usb.h>
+#include "../phy-provider.h"
+
/* GUSB2PHYACCn register */
#define PHY_NEW_REG_REQ BIT(25)
#define PHY_VSTS_BUSY BIT(23)
diff --git a/drivers/phy/realtek/phy-rtk-usb3.c b/drivers/phy/realtek/phy-rtk-usb3.c
index cce453686db2..3f565c4d96be 100644
--- a/drivers/phy/realtek/phy-rtk-usb3.c
+++ b/drivers/phy/realtek/phy-rtk-usb3.c
@@ -16,9 +16,10 @@
#include <linux/regmap.h>
#include <linux/sys_soc.h>
#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
#include <linux/usb.h>
+#include "../phy-provider.h"
+
#define USB_MDIO_CTRL_PHY_BUSY BIT(7)
#define USB_MDIO_CTRL_PHY_WRITE BIT(0)
#define USB_MDIO_CTRL_PHY_ADDR_SHIFT 8
diff --git a/drivers/phy/renesas/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c
index 6c671254c625..ca5498986120 100644
--- a/drivers/phy/renesas/phy-rcar-gen2.c
+++ b/drivers/phy/renesas/phy-rcar-gen2.c
@@ -12,11 +12,12 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/atomic.h>
+#include "../phy-provider.h"
+
#define USBHS_LPSTS 0x02
#define USBHS_UGCTRL 0x80
#define USBHS_UGCTRL2 0x84
diff --git a/drivers/phy/renesas/phy-rcar-gen3-pcie.c b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
index 3e2cf59ad480..747a1cd74639 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-pcie.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
@@ -9,11 +9,12 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spinlock.h>
+#include "../phy-provider.h"
+
#define PHY_CTRL 0x4000 /* R8A77980 only */
/* PHY control register (PHY_CTRL) */
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 79e820e2fe55..88b4a47677a5 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -19,7 +19,6 @@
#include <linux/mutex.h>
#include <linux/mux/consumer.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
@@ -29,6 +28,8 @@
#include <linux/usb/of.h>
#include <linux/workqueue.h>
+#include "../phy-provider.h"
+
/******* USB2.0 Host registers (original offset is +0x200) *******/
#define USB2_INT_ENABLE 0x000
#define USB2_AHB_BUS_CTR 0x008
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb3.c b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
index 0420f5b283ce..3511831e95d2 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb3.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
@@ -10,10 +10,11 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include "../phy-provider.h"
+
#define USB30_CLKSET0 0x034
#define USB30_CLKSET1 0x036
#define USB30_SSC_SET 0x038
diff --git a/drivers/phy/renesas/phy-rzg3e-usb3.c b/drivers/phy/renesas/phy-rzg3e-usb3.c
index 6b3453ea0004..1c9e2276bb73 100644
--- a/drivers/phy/renesas/phy-rzg3e-usb3.c
+++ b/drivers/phy/renesas/phy-rzg3e-usb3.c
@@ -11,11 +11,12 @@
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define USB3_TEST_RESET 0x0000
#define USB3_TEST_UTMICTRL2 0x0b04
#define USB3_TEST_PRMCTRL5_R 0x0c10
diff --git a/drivers/phy/renesas/r8a779f0-ether-serdes.c b/drivers/phy/renesas/r8a779f0-ether-serdes.c
index c34427ac4fdb..807af518aeda 100644
--- a/drivers/phy/renesas/r8a779f0-ether-serdes.c
+++ b/drivers/phy/renesas/r8a779f0-ether-serdes.c
@@ -10,11 +10,12 @@
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/phy.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define R8A779F0_ETH_SERDES_NUM 3
#define R8A779F0_ETH_SERDES_OFFSET 0x0400
#define R8A779F0_ETH_SERDES_BANK_SELECT 0x03fc
diff --git a/drivers/phy/rockchip/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c
index 592aa956eead..63e972969379 100644
--- a/drivers/phy/rockchip/phy-rockchip-dp.c
+++ b/drivers/phy/rockchip/phy-rockchip-dp.c
@@ -10,10 +10,11 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define GRF_SOC_CON12 0x0274
#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20)
diff --git a/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
index e6a768bbb9b3..de7e00580e20 100644
--- a/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
+++ b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
@@ -21,11 +21,12 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/phy/phy-mipi-dphy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define RK3399_GRF_SOC_CON9 0x6224
#define RK3399_GRF_SOC_CON21 0x6254
#define RK3399_GRF_SOC_CON22 0x6258
diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
index 5187983c58e5..fd292f063f48 100644
--- a/drivers/phy/rockchip/phy-rockchip-emmc.c
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -13,10 +13,11 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/*
* The higher 16-bit of this register is used for write protection
* only if BIT(x + 16) set to 1 the BIT(x) can be written.
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
index c79fb53d8ee5..3b5d86b07564 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
@@ -13,13 +13,14 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/phy/phy.h>
#include <linux/phy/phy-mipi-dphy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
/* GRF */
#define RK1808_GRF_PD_VI_CON_OFFSET 0x0430
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
index 30d5e5ddff4a..5613b34958fe 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
@@ -15,13 +15,13 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/phy/phy-mipi-dphy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/time64.h>
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../phy-provider.h"
#define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l)))
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index 1483907413fa..82b5e7434f83 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -20,6 +20,8 @@
#include <linux/phy/phy.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
#define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l)))
/* REG: 0x00 */
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 8f4c08e599aa..f88e09f61994 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -18,7 +18,6 @@
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_irq.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/regmap.h>
@@ -27,6 +26,8 @@
#include <linux/usb/of.h>
#include <linux/usb/otg.h>
+#include "../phy-provider.h"
+
#define BIT_WRITEABLE_SHIFT 16
#define SCHEDULE_DELAY (60 * HZ)
#define OTG_SCHEDULE_DELAY (2 * HZ)
diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index b60d6bf3f33c..2deb2666acb1 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -9,12 +9,13 @@
#include <linux/clk.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/units.h>
+#include "../phy-provider.h"
+
#define BIT_WRITEABLE_SHIFT 16
#define REF_CLOCK_24MHz (24 * HZ_PER_MHZ)
#define REF_CLOCK_25MHz (25 * HZ_PER_MHZ)
diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
index 126306c01454..604ff00653b0 100644
--- a/drivers/phy/rockchip/phy-rockchip-pcie.c
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -13,12 +13,12 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
#define PHY_MAX_LANE_NUM 4
#define PHY_CFG_DATA_MASK GENMASK(10, 7)
diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
index 0f69060aa5d5..78a0446b81df 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
@@ -15,12 +15,13 @@
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define BIAS_CON0 0x0000
#define I_RES_CNTL_MASK GENMASK(6, 4)
#define I_RES_CNTL(x) FIELD_PREP(I_RES_CNTL_MASK, x)
diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index 2d973bc37f07..01801a4dc436 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -21,6 +21,8 @@
#include <linux/regmap.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define GRF_HDPTX_CON0 0x00
#define LC_REF_CLK_SEL BIT(11)
#define HDPTX_I_PLL_EN BIT(7)
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
index 4e8ffd173096..029566330aa0 100644
--- a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -14,11 +14,12 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/pcie.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
/* Register for RK3568 */
#define GRF_PCIE30PHY_CON1 0x4
#define GRF_PCIE30PHY_CON6 0x18
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index 0a318ccf1bbf..4a9756ca4f68 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -43,6 +43,7 @@
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
@@ -53,8 +54,7 @@
#include <linux/regmap.h>
#include <linux/reset.h>
-#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
+#include "../phy-provider.h"
#define CMN_SSM_BANDGAP (0x21 << 2)
#define CMN_SSM_BIAS (0x22 << 2)
diff --git a/drivers/phy/rockchip/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
index cef96739cf3f..0652f821332b 100644
--- a/drivers/phy/rockchip/phy-rockchip-usb.c
+++ b/drivers/phy/rockchip/phy-rockchip-usb.c
@@ -14,7 +14,6 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>
@@ -23,6 +22,8 @@
#include <linux/mfd/syscon.h>
#include <linux/delay.h>
+#include "../phy-provider.h"
+
static int enable_usb_uart;
#define UOC_CON0 0x00
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index fba35510d88c..cf2abf29512f 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -25,6 +25,8 @@
#include <linux/usb/typec_dp.h>
#include <linux/usb/typec_mux.h>
+#include "../phy-provider.h"
+
/* USBDP PHY Register Definitions */
#define UDPHY_PCS 0x4000
#define UDPHY_PMA 0x8000
diff --git a/drivers/phy/samsung/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
index a636dee07585..00d0ed82a620 100644
--- a/drivers/phy/samsung/phy-exynos-dp-video.c
+++ b/drivers/phy/samsung/phy-exynos-dp-video.c
@@ -12,11 +12,12 @@
#include <linux/module.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include "../phy-provider.h"
+
struct exynos_dp_video_phy_drvdata {
u32 phy_ctrl_offset;
};
diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
index be925508ed97..ce8a258a104e 100644
--- a/drivers/phy/samsung/phy-exynos-mipi-video.c
+++ b/drivers/phy/samsung/phy-exynos-mipi-video.c
@@ -11,13 +11,14 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/spinlock.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
#include <linux/mfd/syscon.h>
+#include "../phy-provider.h"
+
enum exynos_mipi_phy_id {
EXYNOS_MIPI_PHY_ID_NONE = -1,
EXYNOS_MIPI_PHY_ID_CSIS0,
diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c
index 53c9230c2907..9dd3a4a90fa7 100644
--- a/drivers/phy/samsung/phy-exynos-pcie.c
+++ b/drivers/phy/samsung/phy-exynos-pcie.c
@@ -12,9 +12,10 @@
#include <linux/mfd/syscon.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define PCIE_PHY_OFFSET(x) ((x) * 0x4)
/* Sysreg FSYS register offsets and bits for Exynos5433 */
diff --git a/drivers/phy/samsung/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c
index 3898a7f58217..beb2f96bebbf 100644
--- a/drivers/phy/samsung/phy-exynos4210-usb2.c
+++ b/drivers/phy/samsung/phy-exynos4210-usb2.c
@@ -8,8 +8,9 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
+
+#include "../phy-provider.h"
#include "phy-samsung-usb2.h"
/* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c
index b528a5d037fe..a402f80d0aab 100644
--- a/drivers/phy/samsung/phy-exynos4x12-usb2.c
+++ b/drivers/phy/samsung/phy-exynos4x12-usb2.c
@@ -8,8 +8,9 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
+
+#include "../phy-provider.h"
#include "phy-samsung-usb2.h"
/* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 5a181cb4597e..cb476d007e3f 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -26,6 +26,8 @@
#include <linux/usb/typec.h>
#include <linux/usb/typec_mux.h>
+#include "../phy-provider.h"
+
/* Exynos USB PHY registers */
#define EXYNOS5_FSEL_9MHZ6 0x0
#define EXYNOS5_FSEL_10MHZ 0x1
diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
index 595adba5fb8f..0f85ae0a5901 100644
--- a/drivers/phy/samsung/phy-exynos5250-sata.c
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
@@ -15,12 +15,13 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/spinlock.h>
#include <linux/mfd/syscon.h>
+#include "../phy-provider.h"
+
#define SATAPHY_CONTROL_OFFSET 0x0724
#define EXYNOS5_SATAPHY_PMU_ENABLE BIT(0)
#define EXYNOS5_SATA_RESET 0x4
diff --git a/drivers/phy/samsung/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c
index 21b06072f866..04815633f290 100644
--- a/drivers/phy/samsung/phy-exynos5250-usb2.c
+++ b/drivers/phy/samsung/phy-exynos5250-usb2.c
@@ -8,8 +8,9 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
+
+#include "../phy-provider.h"
#include "phy-samsung-usb2.h"
/* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
index 32be62e49804..4d72559d29a9 100644
--- a/drivers/phy/samsung/phy-s5pv210-usb2.c
+++ b/drivers/phy/samsung/phy-s5pv210-usb2.c
@@ -8,7 +8,8 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
#include "phy-samsung-usb2.h"
/* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
index ee665f26c236..b55a726cd44e 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.c
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -15,10 +15,10 @@
#include <linux/iopoll.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
#include "phy-samsung-ufs.h"
#define for_each_phy_lane(phy, i) \
diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h
index f2c2e744e5ba..90f4d4cef631 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.h
+++ b/drivers/phy/samsung/phy-samsung-ufs.h
@@ -10,9 +10,10 @@
#ifndef _PHY_SAMSUNG_UFS_
#define _PHY_SAMSUNG_UFS_
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define PHY_COMN_BLK 1
#define PHY_TRSV_BLK 2
#define END_UFS_PHY_CFG { 0 }
diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
index d2749b67cf8f..362dd4ae3cab 100644
--- a/drivers/phy/samsung/phy-samsung-usb2.c
+++ b/drivers/phy/samsung/phy-samsung-usb2.c
@@ -13,6 +13,8 @@
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
+
+#include "../phy-provider.h"
#include "phy-samsung-usb2.h"
static int samsung_usb2_phy_power_on(struct phy *phy)
diff --git a/drivers/phy/samsung/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
index ebaf43bfc5a2..515c7938fccd 100644
--- a/drivers/phy/samsung/phy-samsung-usb2.h
+++ b/drivers/phy/samsung/phy-samsung-usb2.h
@@ -10,12 +10,13 @@
#define _PHY_EXYNOS_USB2_H
#include <linux/clk.h>
-#include <linux/phy/phy.h>
#include <linux/device.h>
#include <linux/regmap.h>
#include <linux/spinlock.h>
#include <linux/regulator/consumer.h>
+#include "../phy-provider.h"
+
#define KHZ 1000
#define MHZ (KHZ * KHZ)
diff --git a/drivers/phy/socionext/phy-uniphier-ahci.c b/drivers/phy/socionext/phy-uniphier-ahci.c
index 28cf3efe0695..6b3ce56c7f0c 100644
--- a/drivers/phy/socionext/phy-uniphier-ahci.c
+++ b/drivers/phy/socionext/phy-uniphier-ahci.c
@@ -12,10 +12,11 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
struct uniphier_ahciphy_priv {
struct device *dev;
void __iomem *base;
diff --git a/drivers/phy/socionext/phy-uniphier-pcie.c b/drivers/phy/socionext/phy-uniphier-pcie.c
index c19173492b79..00f6cdf846f1 100644
--- a/drivers/phy/socionext/phy-uniphier-pcie.c
+++ b/drivers/phy/socionext/phy-uniphier-pcie.c
@@ -12,12 +12,13 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/resource.h>
+#include "../phy-provider.h"
+
/* PHY */
#define PCL_PHY_CLKCTRL 0x0000
#define PORT_SEL_MASK GENMASK(11, 9)
diff --git a/drivers/phy/socionext/phy-uniphier-usb2.c b/drivers/phy/socionext/phy-uniphier-usb2.c
index c49d432e526b..6ee566478be0 100644
--- a/drivers/phy/socionext/phy-uniphier-usb2.c
+++ b/drivers/phy/socionext/phy-uniphier-usb2.c
@@ -10,11 +10,12 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
+#include "../phy-provider.h"
+
#define SG_USBPHY1CTRL 0x500
#define SG_USBPHY1CTRL2 0x504
#define SG_USBPHY2CTRL 0x508
diff --git a/drivers/phy/socionext/phy-uniphier-usb3hs.c b/drivers/phy/socionext/phy-uniphier-usb3hs.c
index 8c8673df0084..a08db863223f 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3hs.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3hs.c
@@ -17,12 +17,13 @@
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
#define HSPHY_CFG0 0x0
#define HSPHY_CFG0_HS_I_MASK GENMASK(31, 28)
#define HSPHY_CFG0_HSDISC_MASK GENMASK(27, 26)
diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c
index f402ed8732fd..8829305e9d4c 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3ss.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c
@@ -16,11 +16,12 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define SSPHY_TESTI 0x0
#define TESTI_DAT_MASK GENMASK(13, 6)
#define TESTI_ADR_MASK GENMASK(5, 1)
diff --git a/drivers/phy/sophgo/phy-cv1800-usb2.c b/drivers/phy/sophgo/phy-cv1800-usb2.c
index 6fe846534e9c..1fd7bba498ad 100644
--- a/drivers/phy/sophgo/phy-cv1800-usb2.c
+++ b/drivers/phy/sophgo/phy-cv1800-usb2.c
@@ -12,10 +12,11 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/spinlock.h>
+#include "../phy-provider.h"
+
#define REG_USB_PHY_CTRL 0x048
#define PHY_VBUS_POWER_EN BIT(0)
diff --git a/drivers/phy/spacemit/phy-k1-pcie.c b/drivers/phy/spacemit/phy-k1-pcie.c
index 75477bea7f70..6f8f2f39f7f8 100644
--- a/drivers/phy/spacemit/phy-k1-pcie.c
+++ b/drivers/phy/spacemit/phy-k1-pcie.c
@@ -5,6 +5,7 @@
* Copyright (C) 2025 by RISCstar Solutions Corporation. All rights reserved.
*/
+#include <dt-bindings/phy/phy.h>
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
@@ -12,12 +13,11 @@
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
/*
* Three PCIe ports are supported in the SpacemiT K1 SoC, and this driver
diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c
index 01af310d6683..c897d80de41a 100644
--- a/drivers/phy/spacemit/phy-k1-usb2.c
+++ b/drivers/phy/spacemit/phy-k1-usb2.c
@@ -9,11 +9,12 @@
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/iopoll.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/usb/of.h>
+#include "../phy-provider.h"
+
#define PHY_RST_MODE_CTRL 0x04
#define PHY_PLL_RDY BIT(0)
#define PHY_CLK_CDR_EN BIT(1)
diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
index 43cef89af55e..e9792deb629a 100644
--- a/drivers/phy/st/phy-miphy28lp.c
+++ b/drivers/phy/st/phy-miphy28lp.c
@@ -7,6 +7,7 @@
* Author: Alexandre Torgue <alexandre.torgue@st.com>
*/
+#include <dt-bindings/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/iopoll.h>
@@ -16,13 +17,12 @@
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/clk.h>
-#include <linux/phy/phy.h>
#include <linux/delay.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/reset.h>
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
/* MiPHY registers */
#define MIPHY_CONF_RESET 0x00
diff --git a/drivers/phy/st/phy-spear1310-miphy.c b/drivers/phy/st/phy-spear1310-miphy.c
index c661ab63505f..86acc2412c46 100644
--- a/drivers/phy/st/phy-spear1310-miphy.c
+++ b/drivers/phy/st/phy-spear1310-miphy.c
@@ -14,10 +14,11 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/* SPEAr1310 Registers */
#define SPEAR1310_PCIE_SATA_CFG 0x3A4
#define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31)
diff --git a/drivers/phy/st/phy-spear1340-miphy.c b/drivers/phy/st/phy-spear1340-miphy.c
index 85a60d64ebb7..4dbd3158c060 100644
--- a/drivers/phy/st/phy-spear1340-miphy.c
+++ b/drivers/phy/st/phy-spear1340-miphy.c
@@ -14,10 +14,11 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/* SPEAr1340 Registers */
/* Power Management Registers */
#define SPEAR1340_PCM_CFG 0x100
diff --git a/drivers/phy/st/phy-stih407-usb.c b/drivers/phy/st/phy-stih407-usb.c
index 7a3e4584895c..497f9aa4139d 100644
--- a/drivers/phy/st/phy-stih407-usb.c
+++ b/drivers/phy/st/phy-stih407-usb.c
@@ -16,7 +16,8 @@
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
#define PHYPARAM_REG 0
#define PHYCTRL_REG 1
diff --git a/drivers/phy/st/phy-stm32-combophy.c b/drivers/phy/st/phy-stm32-combophy.c
index 607b4d607eb5..8757b1993e90 100644
--- a/drivers/phy/st/phy-stm32-combophy.c
+++ b/drivers/phy/st/phy-stm32-combophy.c
@@ -10,12 +10,13 @@
#include <linux/clk.h>
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
-#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
+
#define SYSCFG_COMBOPHY_CR1 0x4c00
#define SYSCFG_COMBOPHY_CR2 0x4c04
#define SYSCFG_COMBOPHY_CR4 0x4c0c
diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index b44afbff8616..647fbbe5c734 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -18,6 +18,8 @@
#include <linux/reset.h>
#include <linux/units.h>
+#include "../phy-provider.h"
+
#define STM32_USBPHYC_PLL 0x0
#define STM32_USBPHYC_MISC 0x8
#define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100))
diff --git a/drivers/phy/starfive/phy-jh7110-dphy-rx.c b/drivers/phy/starfive/phy-jh7110-dphy-rx.c
index 0b039e1f71c5..099a1ebf6194 100644
--- a/drivers/phy/starfive/phy-jh7110-dphy-rx.c
+++ b/drivers/phy/starfive/phy-jh7110-dphy-rx.c
@@ -13,11 +13,12 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define STF_DPHY_APBCFGSAIF_SYSCFG(x) (x)
#define STF_DPHY_ENABLE_CLK BIT(6)
diff --git a/drivers/phy/starfive/phy-jh7110-dphy-tx.c b/drivers/phy/starfive/phy-jh7110-dphy-tx.c
index c64d1c91b130..a5faf06b6d14 100644
--- a/drivers/phy/starfive/phy-jh7110-dphy-tx.c
+++ b/drivers/phy/starfive/phy-jh7110-dphy-tx.c
@@ -15,12 +15,13 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/phy/phy.h>
#include <linux/phy/phy-mipi-dphy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define STF_DPHY_APBIFSAIF_SYSCFG(x) (x)
#define STF_DPHY_AON_POWER_READY_N_ACTIVE 0
diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c b/drivers/phy/starfive/phy-jh7110-pcie.c
index 734c8e007727..d68d396ac3cc 100644
--- a/drivers/phy/starfive/phy-jh7110-pcie.c
+++ b/drivers/phy/starfive/phy-jh7110-pcie.c
@@ -12,10 +12,11 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define PCIE_KVCO_LEVEL_OFF 0x28
#define PCIE_USB3_PHY_PLL_CTL_OFF 0x7c
#define PCIE_KVCO_TUNE_SIGNAL_OFF 0x80
diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c
index b505d89860b4..5762586e5c7d 100644
--- a/drivers/phy/starfive/phy-jh7110-usb.c
+++ b/drivers/phy/starfive/phy-jh7110-usb.c
@@ -12,11 +12,12 @@
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/usb/of.h>
+#include "../phy-provider.h"
+
#define USB_125M_CLK_RATE 125000000
#define USB_CLK_MODE_OFF 0x0
#define USB_CLK_MODE_RX_NORMAL_PWR BIT(1)
diff --git a/drivers/phy/sunplus/phy-sunplus-usb2.c b/drivers/phy/sunplus/phy-sunplus-usb2.c
index 637a5fbae6d9..2ddbc37d09ee 100644
--- a/drivers/phy/sunplus/phy-sunplus-usb2.c
+++ b/drivers/phy/sunplus/phy-sunplus-usb2.c
@@ -17,10 +17,11 @@
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
+#include "../phy-provider.h"
+
#define HIGH_MASK_BITS GENMASK(31, 16)
#define LOW_MASK_BITS GENMASK(15, 0)
#define OTP_DISC_LEVEL_DEFAULT 0xd
diff --git a/drivers/phy/tegra/phy-tegra194-p2u.c b/drivers/phy/tegra/phy-tegra194-p2u.c
index f49b417c9eb6..467b6b97e53d 100644
--- a/drivers/phy/tegra/phy-tegra194-p2u.c
+++ b/drivers/phy/tegra/phy-tegra194-p2u.c
@@ -11,9 +11,10 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "../phy-provider.h"
+
#define P2U_CONTROL_CMN 0x74
#define P2U_CONTROL_CMN_ENABLE_L2_EXIT_RATE_CHANGE BIT(13)
#define P2U_CONTROL_CMN_SKP_SIZE_PROTECTION_EN BIT(20)
diff --git a/drivers/phy/tegra/xusb-tegra124.c b/drivers/phy/tegra/xusb-tegra124.c
index 70b6213370a8..21686c6fb2d7 100644
--- a/drivers/phy/tegra/xusb-tegra124.c
+++ b/drivers/phy/tegra/xusb-tegra124.c
@@ -8,7 +8,6 @@
#include <linux/mailbox_client.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
@@ -16,6 +15,7 @@
#include <soc/tegra/fuse.h>
+#include "../phy-provider.h"
#include "xusb.h"
#define FUSE_SKU_CALIB_HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? 15 : 0)
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index 1ddf11265974..e017cb1ff484 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -7,7 +7,6 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
@@ -15,6 +14,7 @@
#include <soc/tegra/fuse.h>
+#include "../phy-provider.h"
#include "xusb.h"
/* FUSE USB_CALIB registers */
diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 1abc5913ec49..006aba47b93d 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
@@ -21,6 +20,7 @@
#include <soc/tegra/fuse.h>
+#include "../phy-provider.h"
#include "xusb.h"
#define FUSE_SKU_CALIB_HS_CURR_LEVEL_PADX_SHIFT(x) \
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 9d74c0ecc31b..07a2f5a4dbee 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -9,7 +9,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/phy/phy.h>
#include <linux/phy/tegra/xusb.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
@@ -19,6 +18,7 @@
#include <soc/tegra/fuse.h>
+#include "../phy-provider.h"
#include "xusb.h"
static struct phy *tegra_xusb_pad_of_xlate(struct device *dev,
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
index 5b6c27aa7e8b..8990b715525e 100644
--- a/drivers/phy/ti/phy-am654-serdes.c
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -15,11 +15,12 @@
#include <linux/mfd/syscon.h>
#include <linux/mux/consumer.h>
#include <linux/of_address.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define CMU_R004 0x4
#define CMU_R060 0x60
#define CMU_R07C 0x7c
diff --git a/drivers/phy/ti/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c
index 62fa6f89c0e6..261b65abd38b 100644
--- a/drivers/phy/ti/phy-da8xx-usb.c
+++ b/drivers/phy/ti/phy-da8xx-usb.c
@@ -11,12 +11,13 @@
#include <linux/mfd/da8xx-cfgchip.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/phy/phy.h>
#include <linux/platform_data/phy-da8xx-usb.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define PHY_INIT_BITS (CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN)
struct da8xx_usb_phy {
diff --git a/drivers/phy/ti/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c
index d274831b731c..515ef7812bde 100644
--- a/drivers/phy/ti/phy-dm816x-usb.c
+++ b/drivers/phy/ti/phy-dm816x-usb.c
@@ -12,10 +12,11 @@
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/delay.h>
-#include <linux/phy/phy.h>
#include <linux/mfd/syscon.h>
+#include "../phy-provider.h"
+
/*
* TRM has two sets of USB_CTRL registers.. The correct register bits
* are in TRM section 24.9.8.2 USB_CTRL Register. The TRM documents the
diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index 6213c2b6005a..ce7dc692d7be 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -14,9 +14,10 @@
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/phy.h>
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
/* AM33xx SoC specific definitions for the CONTROL port */
#define AM33XX_GMII_SEL_MODE_MII 0
#define AM33XX_GMII_SEL_MODE_RMII 1
diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index 1eb252604441..318f51d09c28 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -16,7 +16,6 @@
#include <linux/of_platform.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/phy/omap_usb.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
@@ -25,6 +24,8 @@
#include <linux/sys_soc.h>
#include <linux/usb/phy_companion.h>
+#include "../phy-provider.h"
+
#define USB2PHY_ANA_CONFIG1 0x4c
#define USB2PHY_DISCON_BYP_LATCH BIT(31)
diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index b5543b5c674c..d63c8e872d5b 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -10,7 +10,6 @@
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/slab.h>
-#include <linux/phy/phy.h>
#include <linux/of.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -22,6 +21,8 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
+#include "../phy-provider.h"
+
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
#define PLL_CONFIGURATION1 0x0000000C
diff --git a/drivers/phy/ti/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
index a26aec3ab29e..67c9883691fc 100644
--- a/drivers/phy/ti/phy-twl4030-usb.c
+++ b/drivers/phy/ti/phy-twl4030-usb.c
@@ -20,7 +20,6 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
-#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
#include <linux/usb/musb.h>
#include <linux/usb/ulpi.h>
@@ -29,6 +28,8 @@
#include <linux/err.h>
#include <linux/slab.h>
+#include "../phy-provider.h"
+
/* Register defines */
#define MCPC_CTRL 0x30
diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index fe6b4925d166..db40594622da 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -12,6 +12,7 @@
* PCIe should also work but that is experimental as of now.
*/
+#include <dt-bindings/phy/phy.h>
#include <linux/clk.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
@@ -19,12 +20,11 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
/*
* Lane Registers
diff --git a/include/linux/phy/phy-sun4i-usb.h b/include/linux/phy/phy-sun4i-usb.h
index f3e7b13608e4..66612be0dac5 100644
--- a/include/linux/phy/phy-sun4i-usb.h
+++ b/include/linux/phy/phy-sun4i-usb.h
@@ -6,7 +6,7 @@
#ifndef PHY_SUN4I_USB_H_
#define PHY_SUN4I_USB_H_
-#include "phy.h"
+struct phy;
/**
* sun4i_usb_phy_set_squelch_detect() - Enable/disable squelch detect
diff --git a/include/linux/phy/tegra/xusb.h b/include/linux/phy/tegra/xusb.h
index 6ca51e0080ec..e6c613f9bef2 100644
--- a/include/linux/phy/tegra/xusb.h
+++ b/include/linux/phy/tegra/xusb.h
@@ -8,6 +8,7 @@
struct tegra_xusb_padctl;
struct device;
+struct phy;
enum usb_device_speed;
struct tegra_xusb_padctl *tegra_xusb_padctl_get(struct device *dev);
diff --git a/include/linux/phy/ulpi_phy.h b/include/linux/phy/ulpi_phy.h
index 7054b440347c..0f9e8430d398 100644
--- a/include/linux/phy/ulpi_phy.h
+++ b/include/linux/phy/ulpi_phy.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/phy/phy.h>
+#include "../../drivers/phy/phy-provider.h"
/**
* Helper that registers PHY for a ULPI device and adds a lookup for binding it
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH v7 phy-next 20/27] media: sunxi: a83-mips-csi2: include PHY provider header
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Chen-Yu Tsai, Mauro Carvalho Chehab,
Jernej Skrabec, Samuel Holland
In-Reply-To: <20260430110652.558622-1-vladimir.oltean@nxp.com>
The introduction commit 576d196c522b ("media: sunxi: Add support for the
A83T MIPI CSI-2 controller") says:
This implementation splits the protocol and D-PHY registers and
uses the PHY framework internally. The D-PHY is not registered as a
standalone PHY driver since it cannot be used with any other
controller.
However, this does not matter, and is not the only instance of tight PHY
provider <-> consumer pairing. According to Vinod Koul, having PHY
provider drivers outside of drivers/phy/ is discouraged, although it
would be difficult for me to address a proper movement here.
So just include the private provider API header from drivers/phy/ and
leave a FIXME in place.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
---
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Chen-Yu Tsai <wens@kernel.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
v4->v7: none
v3->v4: collect tag
v1->v3: none
---
.../media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
index 24bbcc85013d..1143feeb4fcb 100644
--- a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
+++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
@@ -4,9 +4,9 @@
* Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
*/
-#include <linux/phy/phy.h>
#include <linux/regmap.h>
+#include "../../../../phy/phy-provider.h" /* FIXME */
#include "sun8i_a83t_dphy.h"
#include "sun8i_a83t_mipi_csi2.h"
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH v7 phy-next 19/27] drm: bridge: cdns-mhdp8546: use consumer API for getting PHY bus width
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Andrzej Hajda, Robert Foss, Laurent Pinchart,
Jonas Karlman, Jernej Skrabec, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Simona Vetter
In-Reply-To: <20260430110652.558622-1-vladimir.oltean@nxp.com>
The Cadence MHDP8546 DP bridge driver gets the PHY bus_width attribute
(holding number of lanes) directly, but doing this will no longer be
possible after the definition of struct phy is hidden from consumers.
Use the phy_get_bus_width() API function designed specifically for
consumers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
v1->v7: none
---
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index 87847978c1fb..76a684d4be26 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1300,7 +1300,7 @@ static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
/* Get source capabilities based on PHY attributes */
- mhdp->host.lanes_cnt = mhdp->phy->attrs.bus_width;
+ mhdp->host.lanes_cnt = phy_get_bus_width(mhdp->phy);
if (!mhdp->host.lanes_cnt)
mhdp->host.lanes_cnt = 4;
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH v7 phy-next 18/27] drm/rockchip: dsi: include PHY provider header
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Sandy Huang, Heiko Stübner, Andy Yan,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, David Airlie,
Simona Vetter
In-Reply-To: <20260430110652.558622-1-vladimir.oltean@nxp.com>
The Rockchip DSI controller is a PHY consumer driver, which is also a
PHY provider (calls devm_phy_create()) that lives out of drivers/phy/.
According to Vinod, this is discouraged, although it would be difficult
for me to address a proper movement here.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
v3->v7: none
v2->v3: fix cc list
v1->v2: none
---
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index 3547d91b25d3..c0aaa51e0237 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -27,6 +27,7 @@
#include <drm/drm_print.h>
#include <drm/drm_simple_kms_helper.h>
+#include "../../../phy/phy-provider.h" /* FIXME */
#include "rockchip_drm_drv.h"
#define DSI_PHY_RSTZ 0xa0
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
* [PATCH v7 phy-next 23/27] power: supply: cpcap-charger: include missing <linux/property.h>
From: Vladimir Oltean @ 2026-04-30 11:06 UTC (permalink / raw)
To: linux-phy
Cc: Vinod Koul, Neil Armstrong, dri-devel, freedreno,
linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide,
linux-kernel, linux-media, linux-pci, linux-renesas-soc,
linux-riscv, linux-rockchip, linux-samsung-soc, linux-scsi,
linux-sunxi, linux-tegra, linux-usb, netdev, spacemit,
UNGLinuxDriver, Sebastian Reichel, Sebastian Reichel
In-Reply-To: <20260430110652.558622-1-vladimir.oltean@nxp.com>
This file uses dev_fwnode() without including the proper header for it,
relying on transitive header inclusion from:
drivers/power/supply/cpcap-charger.c
- include/linux/phy/omap_usb.h
- include/linux/usb/phy_companion.h
- include/linux/usb/otg.h
- include/linux/phy/phy.h
- drivers/phy/phy-provider.h
- include/linux/of.h
- include/linux/property.h
With the future removal of drivers/phy/phy-provider.h from
include/linux/phy/phy.h, this transitive inclusion would break.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Cc: Sebastian Reichel <sre@kernel.org>
v2->v7: none
v1->v2: collect tag
---
drivers/power/supply/cpcap-charger.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
index d0c3008db534..24221244b45b 100644
--- a/drivers/power/supply/cpcap-charger.c
+++ b/drivers/power/supply/cpcap-charger.c
@@ -21,6 +21,7 @@
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/gpio/consumer.h>
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox