Re: [PATCH v4 00/12] QorIQ TMU multi-sensor and HWMON support

[Lucas Stach <l.stach@pengutronix.de>]

Series is:

Tested-by: Lucas Stach <l.stach@pengutronix.de>

Regards,
Lucas

Am Samstag, den 13.04.2019, 01:27 -0700 schrieb Andrey Smirnov:
> Everyone:
> 
> This series contains patches adding support for HWMON integration, bug
> fixes and general improvements (hopefully) for TMU driver I made while
> working on it on i.MX8MQ.
> 
> Feedback is welcome!
> 
> Thanks,
> Andrey Smirnov
> 
> Changes since [v3]
> 
>     - Series reabse on top of [rfc]
>     
>     - Fixed incorrect goto label in "thermal: qoriq: Pass data to
>       qoriq_tmu_calibration()"
>       
>     - Added REGS_TRITSR() register description to "thermal: qoriq: Do
>       not report invalid temperature reading"
>       
>     - Reworded commit message of "thermal: qoriq: Remove unnecessary
>       DT node is NULL check"
> 
> Changes since [v2]
> 
>     - Patches rebased on v5.1-rc1
> 
> Changes since [v1]
> 
>     - Rebased on "linus" branch of
>       git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
>       that included latest chagnes adding multi-sensors support
> 
>     - Dropped
> 
> 	thermal: qoriq: Add support for multiple thremal sites
> 	thermal: qoriq: Be more strict when parsing
> 	thermal: qoriq: Simplify error handling in qoriq_tmu_get_sensor_id()
> 
>       since they are no longer relevant
> 
>     - Added
> 
> 	thermal: qoriq: Don't store struct thermal_zone_device reference
> 	thermal: qoriq: Add local struct qoriq_sensor pointer
> 	thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
> 	thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
> 
>       to simplify latest codebase
> 
>     - Changed "thermal: qoriq: Do not report invalid temperature
>       reading" to use regmap_read_poll_timeout() to make sure that
>       tmu_get_temp() waits for fist sample to be ready before
>       reporting it. This case is triggered on my setup if
>       qoriq_thermal is compiled as a module
> 
> [v1] lore.kernel.org/lkml/20190218191141.3729-1-andrew.smirnov@gmail.com
> [v2] lore.kernel.org/lkml/20190222200508.26325-1-andrew.smirnov@gmail.com
> [v3] lore.kernel.org/lkml/20190401041418.5999-1-andrew.smirnov@gmail.com
> [rfc] lore.kernel.org/lkml/20190404080647.8173-1-daniel.lezcano@linaro.org
> 
> Andrey Smirnov (12):
>   thermal: qoriq: Remove unnecessary DT node is NULL check
>   thermal: qoriq: Add local struct device pointer
>   thermal: qoriq: Don't store struct thermal_zone_device reference
>   thermal: qoriq: Drop per-sensor data
>   thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
>   thermal: qoriq: Pass data to qoriq_tmu_calibration() directly
>   thermal: qoriq: Convert driver to use devm_ioremap()
>   thermal: qoriq: Convert driver to use regmap API
>   thermal: qoriq: Enable all sensors before registering them
>   thermal: qoriq: Do not report invalid temperature reading
>   thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()
>   thermal: qoriq: Add hwmon support
> 
>  drivers/thermal/qoriq_thermal.c | 287 +++++++++++++++-----------------
>  drivers/thermal/thermal_hwmon.c |  28 ++++
>  drivers/thermal/thermal_hwmon.h |   7 +
>  3 files changed, 171 insertions(+), 151 deletions(-)
>