[PATCH v4 3/7] power: bq24190_charger: Install irq_handler_thread() at end of probe()

[Liam Breck <liam@networkimprov.net>]

The device specific data is not fully initialized on
request_threaded_irq(). This may cause a crash when the IRQ handler
tries to reference them.

Fix the issue by installing IRQ handler at the end of the probe.

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/power/supply/bq24190_charger.c | 35 ++++++++++++++++---------------
 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index b51eac1..54c8952 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -1392,22 +1392,13 @@ static int bq24190_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	ret = devm_request_threaded_irq(dev, bdi->irq, NULL,
-			bq24190_irq_handler_thread,
-			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-			"bq24190-charger", bdi);
-	if (ret < 0) {
-		dev_err(dev, "Can't set up irq handler\n");
-		goto out1;
-	}
-
 	pm_runtime_enable(dev);
 	pm_runtime_resume(dev);
 
 	ret = bq24190_hw_init(bdi);
 	if (ret < 0) {
 		dev_err(dev, "Hardware init failed\n");
-		goto out2;
+		goto out1;
 	}
 
 	charger_cfg.drv_data = bdi;
@@ -1418,7 +1409,7 @@ static int bq24190_probe(struct i2c_client *client,
 	if (IS_ERR(bdi->charger)) {
 		dev_err(dev, "Can't register charger\n");
 		ret = PTR_ERR(bdi->charger);
-		goto out2;
+		goto out1;
 	}
 
 	battery_cfg.drv_data = bdi;
@@ -1427,24 +1418,34 @@ static int bq24190_probe(struct i2c_client *client,
 	if (IS_ERR(bdi->battery)) {
 		dev_err(dev, "Can't register battery\n");
 		ret = PTR_ERR(bdi->battery);
-		goto out3;
+		goto out2;
 	}
 
 	ret = bq24190_sysfs_create_group(bdi);
 	if (ret) {
 		dev_err(dev, "Can't create sysfs entries\n");
+		goto out3;
+	}
+
+	ret = devm_request_threaded_irq(dev, bdi->irq, NULL,
+			bq24190_irq_handler_thread,
+			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			"bq24190-charger", bdi);
+	if (ret < 0) {
+		dev_err(dev, "Can't set up irq handler\n");
 		goto out4;
 	}
 
 	return 0;
 
 out4:
-	power_supply_unregister(bdi->battery);
+	bq24190_sysfs_remove_group(bdi);
 out3:
-	power_supply_unregister(bdi->charger);
+	power_supply_unregister(bdi->battery);
 out2:
-	pm_runtime_disable(dev);
+	power_supply_unregister(bdi->charger);
 out1:
+	pm_runtime_disable(dev);
 	if (bdi->gpio_int)
 		gpio_free(bdi->gpio_int);