From: Keerthy <j-keerthy@ti.com>
To: <rui.zhang@intel.com>, <robh+dt@kernel.org>, <daniel.lezcano@linaro.org>
Cc: <j-keerthy@ti.com>, <amit.kucheria@verdurent.com>,
<t-kristo@ti.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-pm@vger.kernel.org>, <mark.rutland@arm.com>
Subject: [PATCH v6 0/4] thermal: k3: Add support for bandgap sensors
Date: Tue, 7 Apr 2020 11:21:12 +0530 [thread overview]
Message-ID: <20200407055116.16082-1-j-keerthy@ti.com> (raw)
Add VTM thermal support. In the Voltage Thermal
Management Module(VTM), K3 AM654 supplies a voltage
reference and a temperature sensor feature that are gathered in the band
gap voltage and temperature sensor (VBGAPTS) module. The band
gap provides current and voltage reference for its internal
circuits and other analog IP blocks. The analog-to-digital
converter (ADC) produces an output value that is proportional
to the silicon temperature.
Add support for bandgap sensors. Currently reading temperatures
is supported.
Changes in v6:
* Removed bunch of unused #defines and couple of redundant variables.
* Reordered patches a bit.
* Minor reordering in dt binding patch.
Changes in v5:
* Removed thermal work function which was unused.
* Removed unused preve_tenmp and a couple more struct variables.
* Removed couple of redundant header function include.
Changes in v4:
* Fixed comments from Daniel to remove trend function.
* Mostly cleaned up all the unused variables.
* Driver from bool to tristate.
Changes in v3:
* Fixed errors seen with:
dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
Changes in v2:
* Fixed yaml errors
* renamed am654-industrial-thermal.dtsi to k3-am654-industrial-thermal.dtsi
to follow the convention for k3 family.
Keerthy (4):
dt-bindings: thermal: k3: Add VTM bindings documentation
thermal: k3: Add support for bandgap sensors
arm64: dts: ti: am65-wakeup: Add VTM node
arm64: dts: ti: am654: Add thermal zones
.../bindings/thermal/ti,am654-thermal.yaml | 56 ++++
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 11 +
.../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++
drivers/thermal/Kconfig | 10 +
drivers/thermal/Makefile | 1 +
drivers/thermal/k3_bandgap.c | 264 ++++++++++++++++++
6 files changed, 387 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
create mode 100644 drivers/thermal/k3_bandgap.c
--
2.17.1
next reply other threads:[~2020-04-07 5:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-07 5:51 Keerthy [this message]
2020-04-07 5:51 ` [PATCH v6 1/4] dt-bindings: thermal: k3: Add VTM bindings documentation Keerthy
2020-04-08 7:30 ` Amit Kucheria
2020-04-07 5:51 ` [PATCH v6 2/4] thermal: k3: Add support for bandgap sensors Keerthy
2020-04-08 7:30 ` Amit Kucheria
2020-04-07 5:51 ` [PATCH v6 3/4] arm64: dts: ti: am65-wakeup: Add VTM node Keerthy
2020-04-08 7:30 ` Amit Kucheria
2020-04-07 5:51 ` [PATCH v6 4/4] arm64: dts: ti: am654: Add thermal zones Keerthy
2020-04-08 7:30 ` Amit Kucheria
2020-04-09 13:49 ` [PATCH v6 0/4] thermal: k3: Add support for bandgap sensors Daniel Lezcano
2020-04-09 14:07 ` J, KEERTHY
2020-04-09 14:37 ` Tero Kristo
2020-04-09 14:47 ` Daniel Lezcano
2020-04-27 10:21 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200407055116.16082-1-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=amit.kucheria@verdurent.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox