Linux Power Management development
 help / color / mirror / Atom feed
From: bchihi@baylibre.com
To: daniel.lezcano@linaro.org,
	angelogioacchino.delregno@collabora.com, rafael@kernel.org,
	amitk@kernel.org, rui.zhang@intel.com, matthias.bgg@gmail.com,
	robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	rdunlap@infradead.org, ye.xingchen@zte.com.cn,
	p.zabel@pengutronix.de
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
	khilman@baylibre.com, james.lo@mediatek.com,
	rex-bc.chen@mediatek.com
Subject: [PATCH v14 2/6] dt-bindings: thermal: mediatek: Add LVTS thermal controllers
Date: Thu,  9 Feb 2023 11:56:24 +0100	[thread overview]
Message-ID: <20230209105628.50294-3-bchihi@baylibre.com> (raw)
In-Reply-To: <20230209105628.50294-1-bchihi@baylibre.com>

From: Balsam CHIHI <bchihi@baylibre.com>

Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195.

Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
---
 .../thermal/mediatek,lvts-thermal.yaml        | 142 ++++++++++++++++++
 .../thermal/mediatek,lvts-thermal.h           |  19 +++
 2 files changed, 161 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
 create mode 100644 include/dt-bindings/thermal/mediatek,lvts-thermal.h

diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
new file mode 100644
index 0000000000000..fe9ae4c425c08
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoC Low Voltage Thermal Sensor (LVTS)
+
+maintainers:
+  - Balsam CHIHI <bchihi@baylibre.com>
+
+description: |
+  LVTS is a thermal management architecture composed of three subsystems,
+  a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU),
+  a Converter - Low Voltage Thermal Sensor converter (LVTS), and
+  a Digital controller (LVTS_CTRL).
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8192-lvts-ap
+      - mediatek,mt8192-lvts-mcu
+      - mediatek,mt8195-lvts-ap
+      - mediatek,mt8195-lvts-mcu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+    description: LVTS reset for clearing temporary data on AP/MCU.
+
+  nvmem-cells:
+    minItems: 1
+    items:
+      - description: Calibration eFuse data 1 for LVTS
+      - description: Calibration eFuse data 2 for LVTS
+
+  nvmem-cell-names:
+    minItems: 1
+    items:
+      - const: lvts-calib-data-1
+      - const: lvts-calib-data-2
+
+  "#thermal-sensor-cells":
+    const: 1
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8192-lvts-ap
+              - mediatek,mt8192-lvts-mcu
+    then:
+      properties:
+        nvmem-cells:
+          maxItems: 1
+
+        nvmem-cell-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-lvts-ap
+              - mediatek,mt8195-lvts-mcu
+    then:
+      properties:
+        nvmem-cells:
+          minItems: 2
+
+        nvmem-cell-names:
+          minItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - nvmem-cells
+  - nvmem-cell-names
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/reset/mt8195-resets.h>
+    #include <dt-bindings/thermal/mediatek,lvts-thermal.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      lvts_mcu: thermal-sensor@11278000 {
+        compatible = "mediatek,mt8195-lvts-mcu";
+        reg = <0 0x11278000 0 0x1000>;
+        interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+        resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+        nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+        nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+        #thermal-sensor-cells = <1>;
+      };
+    };
+
+    thermal_zones: thermal-zones {
+      cpu0-thermal {
+        polling-delay = <1000>;
+        polling-delay-passive = <250>;
+        thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
+
+        trips {
+          cpu0_alert: trip-alert {
+            temperature = <85000>;
+            hysteresis = <2000>;
+            type = "passive";
+          };
+
+          cpu0_crit: trip-crit {
+            temperature = <100000>;
+            hysteresis = <2000>;
+            type = "critical";
+          };
+        };
+      };
+    };
diff --git a/include/dt-bindings/thermal/mediatek,lvts-thermal.h b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
new file mode 100644
index 0000000000000..c09398920468b
--- /dev/null
+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ * Author: Balsam CHIHI <bchihi@baylibre.com>
+ */
+
+#ifndef __MEDIATEK_LVTS_DT_H
+#define __MEDIATEK_LVTS_DT_H
+
+#define MT8195_MCU_BIG_CPU0     0
+#define MT8195_MCU_BIG_CPU1     1
+#define MT8195_MCU_BIG_CPU2     2
+#define MT8195_MCU_BIG_CPU3     3
+#define MT8195_MCU_LITTLE_CPU0  4
+#define MT8195_MCU_LITTLE_CPU1  5
+#define MT8195_MCU_LITTLE_CPU2  6
+#define MT8195_MCU_LITTLE_CPU3  7
+
+#endif /* __MEDIATEK_LVTS_DT_H */
-- 
2.34.1


  parent reply	other threads:[~2023-02-09 10:56 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-09 10:56 [PATCH v14 0/6] Add LVTS Thermal Architecture bchihi
2023-02-09 10:56 ` [PATCH v14 1/6] thermal: drivers: mediatek: Relocate driver to mediatek folder bchihi
2023-02-09 10:56 ` bchihi [this message]
2023-02-09 19:07   ` [PATCH v14 2/6] dt-bindings: thermal: mediatek: Add LVTS thermal controllers Rob Herring
2023-02-10  9:09     ` Balsam CHIHI
2023-02-09 10:56 ` [PATCH v14 3/6] arm64: dts: mt8195: Add efuse node to mt8195 bchihi
2023-02-09 16:28   ` Matthias Brugger
2023-02-10  9:08     ` Balsam CHIHI
2023-02-09 10:56 ` [PATCH v14 4/6] thermal: drivers: mediatek: Add the Low Voltage Thermal Sensor driver bchihi
2023-02-09 10:56 ` [PATCH v14 5/6] arm64: dts: mediatek: mt8195: Add thermal zones and thermal nodes bchihi
2023-02-14 14:42   ` Balsam CHIHI
2023-02-09 10:56 ` [PATCH v14 6/6] arm64: dts: mediatek: mt8195: Add temperature mitigation threshold bchihi
2023-02-14 14:43   ` Balsam CHIHI
2023-02-15 12:50     ` AngeloGioacchino Del Regno
2023-02-15 13:13       ` Balsam CHIHI
2023-03-07 11:10         ` Balsam CHIHI
2023-03-31 10:36           ` Matthias Brugger
2023-03-31 11:11             ` Balsam CHIHI
2023-02-10  6:44 ` [PATCH v14 0/6] Add LVTS Thermal Architecture Daniel Lezcano
2023-02-10  9:12   ` Balsam CHIHI

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230209105628.50294-3-bchihi@baylibre.com \
    --to=bchihi@baylibre.com \
    --cc=amitk@kernel.org \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=james.lo@mediatek.com \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=rafael@kernel.org \
    --cc=rdunlap@infradead.org \
    --cc=rex-bc.chen@mediatek.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=ye.xingchen@zte.com.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox