From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-renesas-soc@vger.kernel.org
Cc: "Wolfram Sang" <wsa+renesas@sang-engineering.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Daniel Lezcano" <daniel.lezcano@linaro.org>,
"Amit Kucheria" <amitk@kernel.org>,
"Zhang Rui" <rui.zhang@intel.com>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH RFT v3 3/3] drivers/thermal/rcar_gen3_thermal: add reading fuses for Gen4
Date: Thu, 11 May 2023 21:22:19 +0200 [thread overview]
Message-ID: <20230511192220.7523-4-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20230511192220.7523-1-wsa+renesas@sang-engineering.com>
The registers are differently named and at different offsets, but their
functionality is the same as for Gen3.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/thermal/rcar_gen3_thermal.c | 44 +++++++++++++++++++++++++++--
1 file changed, 42 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 39b382ee08c8..9029d01e029b 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -35,6 +35,12 @@
#define REG_GEN3_PTAT2 0x60
#define REG_GEN3_PTAT3 0x64
#define REG_GEN3_THSCP 0x68
+#define REG_GEN4_THSFMON00 0x180
+#define REG_GEN4_THSFMON01 0x184
+#define REG_GEN4_THSFMON02 0x188
+#define REG_GEN4_THSFMON15 0x1BC
+#define REG_GEN4_THSFMON16 0x1C0
+#define REG_GEN4_THSFMON17 0x1C4
/* IRQ{STR,MSK,EN} bits */
#define IRQ_TEMP1 BIT(0)
@@ -55,6 +61,7 @@
#define MCELSIUS(temp) ((temp) * 1000)
#define GEN3_FUSE_MASK 0xFFF
+#define GEN4_FUSE_MASK 0xFFF
#define TSC_MAX_NUM 5
@@ -272,6 +279,34 @@ static void rcar_gen3_thermal_read_fuses_gen3(struct rcar_gen3_thermal_priv *pri
}
}
+static void rcar_gen3_thermal_read_fuses_gen4(struct rcar_gen3_thermal_priv *priv)
+{
+ unsigned int i;
+
+ /*
+ * Set the pseudo calibration points with fused values.
+ * PTAT is shared between all TSCs but only fused for the first
+ * TSC while THCODEs are fused for each TSC.
+ */
+ priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON16) &
+ GEN4_FUSE_MASK;
+ priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON17) &
+ GEN4_FUSE_MASK;
+ priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON15) &
+ GEN4_FUSE_MASK;
+
+ for (i = 0; i < priv->num_tscs; i++) {
+ struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+ tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON01) &
+ GEN4_FUSE_MASK;
+ tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON02) &
+ GEN4_FUSE_MASK;
+ tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON00) &
+ GEN4_FUSE_MASK;
+ }
+}
+
static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
{
unsigned int i;
@@ -343,6 +378,11 @@ static const struct rcar_thermal_info rcar_gen3_thermal_info = {
.read_fuses = rcar_gen3_thermal_read_fuses_gen3,
};
+static const struct rcar_thermal_info rcar_gen4_thermal_info = {
+ .ths_tj_1 = 126,
+ .read_fuses = rcar_gen3_thermal_read_fuses_gen4,
+};
+
static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
{
.compatible = "renesas,r8a774a1-thermal",
@@ -382,11 +422,11 @@ static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
},
{
.compatible = "renesas,r8a779f0-thermal",
- .data = &rcar_gen3_thermal_info,
+ .data = &rcar_gen4_thermal_info,
},
{
.compatible = "renesas,r8a779g0-thermal",
- .data = &rcar_gen3_thermal_info,
+ .data = &rcar_gen4_thermal_info,
},
{},
};
--
2.35.1
next prev parent reply other threads:[~2023-05-11 19:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-11 19:22 [PATCH RFT v3 0/3] drivers/thermal/rcar_gen3_thermal: add Gen4 fuse support Wolfram Sang
2023-05-11 19:22 ` [PATCH RFT v3 1/3] drivers/thermal/rcar_gen3_thermal: introduce 'info' structure Wolfram Sang
2023-05-11 19:22 ` [PATCH RFT v3 2/3] drivers/thermal/rcar_gen3_thermal: refactor reading fuses into seprarate function Wolfram Sang
2023-05-11 19:22 ` Wolfram Sang [this message]
2023-05-12 12:13 ` [PATCH RFT v3 0/3] drivers/thermal/rcar_gen3_thermal: add Gen4 fuse support Yoshihiro Shimoda
2023-05-12 12:39 ` Wolfram Sang
2023-06-05 14:33 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230511192220.7523-4-wsa+renesas@sang-engineering.com \
--to=wsa+renesas@sang-engineering.com \
--cc=amitk@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=niklas.soderlund@ragnatech.se \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox