RE: [PATCH RFT v3 0/3] drivers/thermal/rcar_gen3_thermal: add Gen4 fuse support

[Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>]

Hello Wolfram-san,

> From: Wolfram Sang, Sent: Friday, May 12, 2023 4:22 AM
> 
> R-Car Gen4 has the fuse registers at different locations and with
> different names, but with the same purpose. So, first refactor IP core
> differences into a 'info' struct, then add the fuse_read callback to it.
> 
> Changes since RFT v2:
> * In patch 3, I mixed up the PTAT and THCODE registers. Fixed now.
>   (Thanks, Shimoda-san!)
> * patches are rebased to 6.4-rc1
> 
> They have been tested on R-Car H3 ES2.0 and M3-N against regressions.
> Actual testing of the new fuses on Gen4 still needs to be done because I
> don't have access to such HW.
> 
> @Shimoda-san: maybe the BSP team or Test team can test these patches?
> A branch for testing can be found here:
> git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/for-thermal
> 
> Looking forward to other review comments, too, of course.

Thank you for the patches!
I checked the patches. So:

Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

And, I tested on R-Car H3 ES3.0 and R-Car S4 and it worked. So,

Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Best regards,
Yoshihiro Shimoda

> Happy hacking,
> 
>    Wolfram
> 
> 
> Wolfram Sang (3):
>   drivers/thermal/rcar_gen3_thermal: introduce 'info' structure
>   drivers/thermal/rcar_gen3_thermal: refactor reading fuses into
>     seprarate function
>   drivers/thermal/rcar_gen3_thermal: add reading fuses for Gen4
> 
>  drivers/thermal/rcar_gen3_thermal.c | 141 ++++++++++++++++++++--------
>  1 file changed, 102 insertions(+), 39 deletions(-)
> 
> --
> 2.35.1