[PATCH AUTOSEL 6.6 01/29] tools/power turbostat: Fix added raw MSR output

[PATCH AUTOSEL 6.6 01/29] tools/power turbostat: Fix added raw MSR output

[Sasha Levin]

From: Doug Smythies <dsmythies@telus.net>

[ Upstream commit e5f4e68eed85fa8495d78cd966eecc2b27bb9e53 ]

When using --Summary mode, added MSRs in raw mode always
print zeros. Print the actual register contents.

Example, with patch:

note the added column:
--add msr0x64f,u32,package,raw,REASON

Where:

0x64F is MSR_CORE_PERF_LIMIT_REASONS

Busy%   Bzy_MHz PkgTmp  PkgWatt CorWatt     REASON
0.00    4800    35      1.42    0.76    0x00000000
0.00    4801    34      1.42    0.76    0x00000000
80.08   4531    66      108.17  107.52  0x08000000
98.69   4530    66      133.21  132.54  0x08000000
99.28   4505    66      128.26  127.60  0x0c000400
99.65   4486    68      124.91  124.25  0x0c000400
99.63   4483    68      124.90  124.25  0x0c000400
79.34   4481    41      99.80   99.13   0x0c000000
0.00    4801    41      1.40    0.73    0x0c000000

Where, for the test processor (i5-10600K):

PKG Limit #1: 125.000 Watts, 8.000000 sec
MSR bit 26 = log; bit 10 = status

PKG Limit #2: 136.000 Watts, 0.002441 sec
MSR bit 27 = log; bit 11 = status

Example, without patch:

Busy%   Bzy_MHz PkgTmp  PkgWatt CorWatt     REASON
0.01    4800    35      1.43    0.77    0x00000000
0.00    4801    35      1.39    0.73    0x00000000
83.49   4531    66      112.71  112.06  0x00000000
98.69   4530    68      133.35  132.69  0x00000000
99.31   4500    67      127.96  127.30  0x00000000
99.63   4483    69      124.91  124.25  0x00000000
99.61   4481    69      124.90  124.25  0x00000000
99.61   4481    71      124.92  124.25  0x00000000
59.35   4479    42      75.03   74.37   0x00000000
0.00    4800    42      1.39    0.73    0x00000000
0.00    4801    42      1.42    0.76    0x00000000

c000000

[lenb: simplified patch to apply only to package scope]

Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/turbostat/turbostat.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 785de89077de0..9602a4798f383 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -1811,9 +1811,10 @@ int sum_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
 	average.packages.rapl_dram_perf_status += p->rapl_dram_perf_status;
 
 	for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) {
-		if (mp->format == FORMAT_RAW)
-			continue;
-		average.packages.counter[i] += p->counter[i];
+		if ((mp->format == FORMAT_RAW) && (topo.num_packages == 0))
+			average.packages.counter[i] = p->counter[i];
+		else
+			average.packages.counter[i] += p->counter[i];
 	}
 	return 0;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.6 02/29] tools/power turbostat: Increase the limit for fd opened

[Sasha Levin]

From: Wyes Karny <wyes.karny@amd.com>

[ Upstream commit 3ac1d14d0583a2de75d49a5234d767e2590384dd ]

When running turbostat, a system with 512 cpus reaches the limit for
maximum number of file descriptors that can be opened. To solve this
problem, the limit is raised to 2^15, which is a large enough number.

Below data is collected from AMD server systems while running turbostat:

|-----------+-------------------------------|
| # of cpus | # of opened fds for turbostat |
|-----------+-------------------------------|
| 128       | 260                           |
|-----------+-------------------------------|
| 192       | 388                           |
|-----------+-------------------------------|
| 512       | 1028                          |
|-----------+-------------------------------|

So, the new max limit would be sufficient up to 2^14 cpus (but this
also depends on how many counters are enabled).

Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/turbostat/turbostat.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 9602a4798f383..5b892c53fc2c2 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -53,6 +53,8 @@
 #define	NAME_BYTES 20
 #define PATH_BYTES 128
 
+#define MAX_NOFILE 0x8000
+
 enum counter_scope { SCOPE_CPU, SCOPE_CORE, SCOPE_PACKAGE };
 enum counter_type { COUNTER_ITEMS, COUNTER_CYCLES, COUNTER_SECONDS, COUNTER_USEC };
 enum counter_format { FORMAT_RAW, FORMAT_DELTA, FORMAT_PERCENT };
@@ -6719,6 +6721,22 @@ void cmdline(int argc, char **argv)
 	}
 }
 
+void set_rlimit(void)
+{
+	struct rlimit limit;
+
+	if (getrlimit(RLIMIT_NOFILE, &limit) < 0)
+		err(1, "Failed to get rlimit");
+
+	if (limit.rlim_max < MAX_NOFILE)
+		limit.rlim_max = MAX_NOFILE;
+	if (limit.rlim_cur < MAX_NOFILE)
+		limit.rlim_cur = MAX_NOFILE;
+
+	if (setrlimit(RLIMIT_NOFILE, &limit) < 0)
+		err(1, "Failed to set rlimit");
+}
+
 int main(int argc, char **argv)
 {
 	outf = stderr;
@@ -6731,6 +6749,9 @@ int main(int argc, char **argv)
 
 	probe_sysfs();
 
+	if (!getuid())
+		set_rlimit();
+
 	turbostat_init();
 
 	msr_sum_record();
-- 
2.43.0

[PATCH AUTOSEL 6.6 03/29] tools/power turbostat: Fix Bzy_MHz documentation typo

[Sasha Levin]

From: Peng Liu <liupeng17@lenovo.com>

[ Upstream commit 0b13410b52c4636aacb6964a4253a797c0fa0d16 ]

The code calculates Bzy_MHz by multiplying TSC_delta * APERF_delta/MPERF_delta
The man page erroneously showed that TSC_delta was divided.

Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/turbostat/turbostat.8 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 8f08c3fd498d5..1ba6340d3b3da 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -370,7 +370,7 @@ below the processor's base frequency.
 
 Busy% = MPERF_delta/TSC_delta
 
-Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval
+Bzy_MHz = TSC_delta*APERF_delta/MPERF_delta/measurement_interval
 
 Note that these calculations depend on TSC_delta, so they
 are not reliable during intervals when TSC_MHz is not running at the base frequency.
-- 
2.43.0

[PATCH AUTOSEL 6.6 04/29] tools/power turbostat: Print ucode revision only if valid

[Sasha Levin]

From: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>

[ Upstream commit fb5ceca046efc84f69fcf9779a013f8a0e63bbff ]

If the MSR read were to fail, turbostat would print "microcode 0x0"

Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/turbostat/turbostat.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 5b892c53fc2c2..4dfeda4870f71 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -5518,6 +5518,7 @@ void process_cpuid()
 	unsigned int eax, ebx, ecx, edx;
 	unsigned int fms, family, model, stepping, ecx_flags, edx_flags;
 	unsigned long long ucode_patch = 0;
+	bool ucode_patch_valid = false;
 
 	eax = ebx = ecx = edx = 0;
 
@@ -5547,6 +5548,8 @@ void process_cpuid()
 
 	if (get_msr(sched_getcpu(), MSR_IA32_UCODE_REV, &ucode_patch))
 		warnx("get_msr(UCODE)");
+	else
+		ucode_patch_valid = true;
 
 	/*
 	 * check max extended function levels of CPUID.
@@ -5557,9 +5560,12 @@ void process_cpuid()
 	__cpuid(0x80000000, max_extended_level, ebx, ecx, edx);
 
 	if (!quiet) {
-		fprintf(outf, "CPUID(1): family:model:stepping 0x%x:%x:%x (%d:%d:%d) microcode 0x%x\n",
-			family, model, stepping, family, model, stepping,
-			(unsigned int)((ucode_patch >> 32) & 0xFFFFFFFF));
+		fprintf(outf, "CPUID(1): family:model:stepping 0x%x:%x:%x (%d:%d:%d)",
+			family, model, stepping, family, model, stepping);
+		if (ucode_patch_valid)
+			fprintf(outf, " microcode 0x%x", (unsigned int)((ucode_patch >> 32) & 0xFFFFFFFF));
+		fputc('\n', outf);
+
 		fprintf(outf, "CPUID(0x80000000): max_extended_levels: 0x%x\n", max_extended_level);
 		fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s %s\n",
 			ecx_flags & (1 << 0) ? "SSE3" : "-",
-- 
2.43.0

[PATCH AUTOSEL 6.6 05/29] tools/power turbostat: Fix warning upon failed /dev/cpu_dma_latency read

[Sasha Levin]

From: Len Brown <len.brown@intel.com>

[ Upstream commit b6fe938317eed58e8c687bd5965a956e15fb5828 ]

Previously a failed read of /dev/cpu_dma_latency erroneously complained
turbostat: capget(CAP_SYS_ADMIN) failed, try "# setcap cap_sys_admin=ep ./turbostat

This went unnoticed because this file is typically visible to root,
and turbostat was typically run as root.

Going forward, when a non-root user can run turbostat...
Complain about failed read access to this file only if --debug is used.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/turbostat/turbostat.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 4dfeda4870f71..0561362301c53 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -5479,7 +5479,8 @@ void print_dev_latency(void)
 
 	fd = open(path, O_RDONLY);
 	if (fd < 0) {
-		warnx("capget(CAP_SYS_ADMIN) failed, try \"# setcap cap_sys_admin=ep %s\"", progname);
+		if (debug)
+			warnx("Read %s failed", path);
 		return;
 	}
 
-- 
2.43.0

[PATCH AUTOSEL 6.6 16/29] tools/power/turbostat: Fix uncore frequency file string

[Sasha Levin]

From: Justin Ernst <justin.ernst@hpe.com>

[ Upstream commit 60add818ab2543b7e4f2bfeaacf2504743c1eb50 ]

Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with:
turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory

We observe the sysfs uncore frequency directories named:
...
package_09_die_00/
package_10_die_00/
package_11_die_00/
...
package_15_die_00/

The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used
with each instance of reading uncore frequency files. uncore-frequency-common.c
creates the sysfs directory with the format "package_%02d_die_%02d". Once the
package value reaches double digits, the formats diverge.

Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d".

[lenb: deleted the probe part of this patch, as it was already fixed]

Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/turbostat/turbostat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 0561362301c53..ffa964ddbacef 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -1969,7 +1969,7 @@ unsigned long long get_uncore_mhz(int package, int die)
 {
 	char path[128];
 
-	sprintf(path, "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/current_freq_khz", package,
+	sprintf(path, "/sys/devices/system/cpu/intel_uncore_frequency/package_%02d_die_%02d/current_freq_khz", package,
 		die);
 
 	return (snapshot_sysfs_counter(path) / 1000);
-- 
2.43.0