[PATCH v1] thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats

[PATCH v1] thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats

[Rafael J. Wysocki]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently, tze_seq_show() output includes all of the trips in the zone
except for critical ones, including invalid trips and trips with no stats
which is confusing.

Make it skip the trips for which there is not mitigation information.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

This is independent of the other thermal patches sent by me recently.

---
 drivers/thermal/thermal_debugfs.c |   22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

Index: linux-pm/drivers/thermal/thermal_debugfs.c
===================================================================
--- linux-pm.orig/drivers/thermal/thermal_debugfs.c
+++ linux-pm/drivers/thermal/thermal_debugfs.c
@@ -754,6 +754,11 @@ static int tze_seq_show(struct seq_file
 
 	for_each_trip_desc(tz, td) {
 		const struct thermal_trip *trip = &td->trip;
+		struct trip_stats *trip_stats;
+
+		/* Skip invalid trips. */
+		if (trip->temperature == THERMAL_TEMP_INVALID)
+			continue;
 
 		/*
 		 * There is no possible mitigation happening at the
@@ -763,6 +768,13 @@ static int tze_seq_show(struct seq_file
 		if (trip->type == THERMAL_TRIP_CRITICAL)
 			continue;
 
+		trip_id = thermal_zone_trip_id(tz, trip);
+		trip_stats = &tze->trip_stats[trip_id];
+
+		/* Skip trips without any stats. */
+		if (trip_stats->min > trip_stats->max)
+			continue;
+
 		if (trip->type == THERMAL_TRIP_PASSIVE)
 			type = "passive";
 		else if (trip->type == THERMAL_TRIP_ACTIVE)
@@ -770,17 +782,15 @@ static int tze_seq_show(struct seq_file
 		else
 			type = "hot";
 
-		trip_id = thermal_zone_trip_id(tz, trip);
-
 		seq_printf(s, "| %*d | %*s | %*d | %*d | %*lld | %*d | %*d | %*d |\n",
 			   4 , trip_id,
 			   8, type,
 			   9, trip->temperature,
 			   9, trip->hysteresis,
-			   10, ktime_to_ms(tze->trip_stats[trip_id].duration),
-			   9, tze->trip_stats[trip_id].avg,
-			   9, tze->trip_stats[trip_id].min,
-			   9, tze->trip_stats[trip_id].max);
+			   10, ktime_to_ms(trip_stats->duration),
+			   9, trip_stats->avg,
+			   9, trip_stats->min,
+			   9, trip_stats->max);
 	}
 
 	return 0;

Re: [PATCH v1] thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats

[Daniel Lezcano]

On 17/04/2024 17:51, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Currently, tze_seq_show() output includes all of the trips in the zone
> except for critical ones, including invalid trips and trips with no stats
> which is confusing.
> 
> Make it skip the trips for which there is not mitigation information.
> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog