From: Thorsten Leemhuis <linux@leemhuis.info>
To: "Francesco Poli (wintermute)" <invernomuto@paranoici.org>,
linux-pm list <linux-pm@vger.kernel.org>
Cc: Thomas Renninger <trenn@suse.com>, Shuah Khan <shuah@kernel.org>,
"John B. Wyatt IV" <jwyatt@redhat.com>,
John Kacur <jkacur@redhat.com>,
Justin Forbes <jforbes@redhat.com>
Subject: Re: [PATCH] cpupower: split unitdir from libdir in Makefile
Date: Thu, 22 May 2025 13:43:49 +0200 [thread overview]
Message-ID: <6deefc69-856e-44d7-b970-2f0127090539@leemhuis.info> (raw)
In-Reply-To: <20250521211656.65646-1-invernomuto@paranoici.org>
On 21.05.25 23:14, Francesco Poli (wintermute) wrote:
> Improve the installation procedure for the systemd service unit
> 'cpupower.service', to be more flexible. Some distros install libraries
> to /usr/lib64/, but systemd service units have to be installed to
> /usr/lib/systemd/system: as a consequence, the installation procedure
> should not assume that systemd service units can be installed to
> ${libdir}/systemd/system ...
> Define a dedicated variable ("unitdir") in the Makefile.
Many thx for doing this!
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Nitpicking:
> Link: https://lore.kernel.org/linux-pm/260b6d79-ab61-43b7-a0eb-813e257bc028@leemhuis.info/T/#m0601940ab439d5cbd288819d2af190ce59e810e6
>
> Fixes: 9c70b779ad91 ("cpupower: add a systemd service to run cpupower")
There should be no blank line between those two lines.
And you should use
https://lore.kernel.org/linux-pm/16ad2364-0161-4724-90e1-b57559168843@leemhuis.info/
as URL after "Link:", as it is shorter. That's the URL you get to when
you open
https://lore.kernel.org/linux-pm/260b6d79-ab61-43b7-a0eb-813e257bc028@leemhuis.info/T/#m0601940ab439d5cbd288819d2af190ce59e810e6
and hit "permalink".
Some maintainers might reject patches due to such aspects, so I thought
it was better to let you know this before it causes trouble sooner or later.
Thx again! Ciao, Thorsten
> Signed-off-by: Francesco Poli (wintermute) <invernomuto@paranoici.org>
> ---
> tools/power/cpupower/Makefile | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
> index be8dfac14076..c43db1c41205 100644
> --- a/tools/power/cpupower/Makefile
> +++ b/tools/power/cpupower/Makefile
> @@ -73,6 +73,7 @@ sbindir ?= /usr/sbin
> mandir ?= /usr/man
> libdir ?= /usr/lib
> libexecdir ?= /usr/libexec
> +unitdir ?= /usr/lib/systemd/system
> includedir ?= /usr/include
> localedir ?= /usr/share/locale
> docdir ?= /usr/share/doc/packages/cpupower
> @@ -309,9 +310,9 @@ install-tools: $(OUTPUT)cpupower
> $(INSTALL_DATA) cpupower-service.conf '$(DESTDIR)${confdir}'
> $(INSTALL) -d $(DESTDIR)${libexecdir}
> $(INSTALL_PROGRAM) cpupower.sh '$(DESTDIR)${libexecdir}/cpupower'
> - $(INSTALL) -d $(DESTDIR)${libdir}/systemd/system
> - sed 's|___CDIR___|${confdir}|; s|___LDIR___|${libexecdir}|' cpupower.service.in > '$(DESTDIR)${libdir}/systemd/system/cpupower.service'
> - $(SETPERM_DATA) '$(DESTDIR)${libdir}/systemd/system/cpupower.service'
> + $(INSTALL) -d $(DESTDIR)${unitdir}
> + sed 's|___CDIR___|${confdir}|; s|___LDIR___|${libexecdir}|' cpupower.service.in > '$(DESTDIR)${unitdir}/cpupower.service'
> + $(SETPERM_DATA) '$(DESTDIR)${unitdir}/cpupower.service'
>
> install-man:
> $(INSTALL_DATA) -D man/cpupower.1 $(DESTDIR)${mandir}/man1/cpupower.1
> @@ -348,7 +349,7 @@ uninstall:
> - rm -f $(DESTDIR)${bindir}/utils/cpupower
> - rm -f $(DESTDIR)${confdir}cpupower-service.conf
> - rm -f $(DESTDIR)${libexecdir}/cpupower
> - - rm -f $(DESTDIR)${libdir}/systemd/system/cpupower.service
> + - rm -f $(DESTDIR)${unitdir}/cpupower.service
> - rm -f $(DESTDIR)${mandir}/man1/cpupower.1
> - rm -f $(DESTDIR)${mandir}/man1/cpupower-frequency-set.1
> - rm -f $(DESTDIR)${mandir}/man1/cpupower-frequency-info.1
>
> base-commit: e5174365c13246ed8fd2d40900edec37be6f7a34
next prev parent reply other threads:[~2025-05-22 11:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-21 21:14 [PATCH] cpupower: split unitdir from libdir in Makefile Francesco Poli (wintermute)
2025-05-22 11:43 ` Thorsten Leemhuis [this message]
2025-05-22 22:21 ` Francesco Poli
2025-05-23 17:06 ` Shuah Khan
2025-06-07 7:50 ` Thorsten Leemhuis
2025-06-10 15:13 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6deefc69-856e-44d7-b970-2f0127090539@leemhuis.info \
--to=linux@leemhuis.info \
--cc=invernomuto@paranoici.org \
--cc=jforbes@redhat.com \
--cc=jkacur@redhat.com \
--cc=jwyatt@redhat.com \
--cc=linux-pm@vger.kernel.org \
--cc=shuah@kernel.org \
--cc=trenn@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox