From: Mario Limonciello <mario.limonciello@amd.com>
To: K Prateek Nayak <kprateek.nayak@amd.com>,
Huang Rui <ray.huang@amd.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Viresh Kumar <viresh.kumar@linaro.org>
Cc: Mario Limonciello <superm1@kernel.org>,
Perry Yuan <perry.yuan@amd.com>,
linux-pm@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 4/9] cpufreq/amd-pstate: Add dynamic EPP as an "energy_performance_preference" mode
Date: Fri, 24 Jul 2026 13:55:26 -0500 [thread overview]
Message-ID: <c58700f8-2d75-4dd5-b30d-aa1f2d95b21c@amd.com> (raw)
In-Reply-To: <20260723201228.22584-5-kprateek.nayak@amd.com>
On 7/23/26 15:12, K Prateek Nayak wrote:
> Conver the global "dynamic_epp" toggle into a per-CPU
Convert
> "energy_performance_preference" mode "dynamic" that allows toggling the
> functionality of "dynamic_epp" at a per-CPU level.
>
> Instead of being a system-wide toggle, users can opt into the
> functionality of dynamic EPP on a per-CPU basis by switching to the
> powersave governor and selecting the "dynamic" mode from the available
> performance preferences.
>
> Unlike the previous implementation that had to check for driver mode
> before toggling on the functionality, block writes to certain sysfs
> files, potentially disallow policy change, etc. the per-CPU toggle fits
> naturally into the intended design and provides more granular control to
> the user.
>
> The dynamic_epp file is now redundant as the option to toggle it on is
> controlled via energy_performance_preference, and the dynamic_epp file
> will be removed in the subsequent commit.
>
> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
> ---
> Changelog rfc v1..v2:
>
> o Removed "dynamic_epp" global control related changes since it will be
> removed in the subsequent commit.
> ---
> drivers/cpufreq/amd-pstate.c | 57 +++++++++++++++++++++++++++++++-----
> 1 file changed, 49 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index 7d1feed0e11e..fc90e4108c22 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -106,6 +106,7 @@ static struct quirk_entry *quirks;
> * 3 balance_power
> * 4 power
> * 5 custom (for raw EPP values)
> + * 6 dynamic (platform profile driven selection)
> */
> enum energy_perf_value_index {
> EPP_INDEX_DEFAULT = 0,
> @@ -114,6 +115,7 @@ enum energy_perf_value_index {
> EPP_INDEX_BALANCE_POWERSAVE,
> EPP_INDEX_POWERSAVE,
> EPP_INDEX_CUSTOM,
> + EPP_INDEX_DYNAMIC,
> EPP_INDEX_MAX,
> };
>
> @@ -124,6 +126,7 @@ static const char * const energy_perf_strings[] = {
> [EPP_INDEX_BALANCE_POWERSAVE] = "balance_power",
> [EPP_INDEX_POWERSAVE] = "power",
> [EPP_INDEX_CUSTOM] = "custom",
> + [EPP_INDEX_DYNAMIC] = "dynamic",
> };
> static_assert(ARRAY_SIZE(energy_perf_strings) == EPP_INDEX_MAX);
>
> @@ -134,7 +137,7 @@ static unsigned int epp_values[] = {
> [EPP_INDEX_BALANCE_POWERSAVE] = AMD_CPPC_EPP_BALANCE_POWERSAVE,
> [EPP_INDEX_POWERSAVE] = AMD_CPPC_EPP_POWERSAVE,
> };
> -static_assert(ARRAY_SIZE(epp_values) == EPP_INDEX_MAX - 1);
> +static_assert(ARRAY_SIZE(epp_values) == EPP_INDEX_MAX - 2);
>
> typedef int (*cppc_mode_transition_fn)(int);
>
> @@ -1274,6 +1277,7 @@ EXPORT_SYMBOL_GPL(amd_pstate_clear_dynamic_epp);
> static int amd_pstate_set_dynamic_epp(struct cpufreq_policy *policy)
> {
> struct amd_cpudata *cpudata = policy->driver_data;
> + u64 prev = READ_ONCE(cpudata->cppc_req_cached);
> int ret;
> u8 epp;
>
> @@ -1314,6 +1318,9 @@ static int amd_pstate_set_dynamic_epp(struct cpufreq_policy *policy)
> cleanup:
> amd_pstate_clear_dynamic_epp(policy);
>
> + epp = FIELD_GET(AMD_CPPC_EPP_PERF_MASK, prev);
> + /* Restore previous EPP if toggling Dynamic EPP failed. */
> + amd_pstate_set_epp(policy, epp);
> return ret;
> }
>
> @@ -1384,7 +1391,7 @@ static ssize_t show_amd_pstate_hw_prefcore(struct cpufreq_policy *policy,
> static ssize_t show_energy_performance_available_preferences(
> struct cpufreq_policy *policy, char *buf)
> {
> - int offset = 0, i;
> + int i, offset = 0;
> struct amd_cpudata *cpudata = policy->driver_data;
>
> if (cpudata->policy == CPUFREQ_POLICY_PERFORMANCE)
> @@ -1407,11 +1414,6 @@ ssize_t store_energy_performance_preference(struct cpufreq_policy *policy,
> bool raw_epp = false;
> u8 epp;
>
> - if (cpudata->dynamic_epp) {
> - pr_debug("EPP cannot be set when dynamic EPP is enabled\n");
> - return -EBUSY;
> - }
> -
> /*
> * if the value matches a number, use that, otherwise see if
> * matches an index in the energy_perf_strings array
> @@ -1422,6 +1424,23 @@ ssize_t store_energy_performance_preference(struct cpufreq_policy *policy,
> ret = sysfs_match_string(energy_perf_strings, buf);
> if (ret < 0 || ret == EPP_INDEX_CUSTOM)
> return -EINVAL;
> +
> + if (ret == EPP_INDEX_DYNAMIC) {
> + /*
> + * Dynamic EPP was already enabled for this CPU.
> + * Nothing to do.
> + */
> + if (cpudata->dynamic_epp)
> + return count;
> +
> + cpudata->current_profile = PLATFORM_PROFILE_BALANCED;
> + ret = amd_pstate_set_dynamic_epp(policy);
> + if (ret)
> + return ret;
> +
> + return count;
> + }
> +
> if (ret)
> epp = epp_values[ret];
> else
> @@ -1433,6 +1452,13 @@ ssize_t store_energy_performance_preference(struct cpufreq_policy *policy,
> return -EBUSY;
> }
>
> + /*
> + * Dynamic EPP was enabled previously!
> + * Switch back to the static EPP mode.
> + */
> + if (cpudata->dynamic_epp)
> + amd_pstate_clear_dynamic_epp(policy);
> +
> ret = amd_pstate_set_epp(policy, epp);
> if (ret)
> return ret;
> @@ -1450,7 +1476,7 @@ ssize_t show_energy_performance_preference(struct cpufreq_policy *policy, char *
>
> epp = FIELD_GET(AMD_CPPC_EPP_PERF_MASK, cpudata->cppc_req_cached);
>
> - if (cpudata->raw_epp)
> + if (!cpudata->dynamic_epp && cpudata->raw_epp)
> return sysfs_emit(buf, "%u\n", epp);
>
> switch (epp) {
> @@ -1470,6 +1496,9 @@ ssize_t show_energy_performance_preference(struct cpufreq_policy *policy, char *
> return -EINVAL;
> }
>
> + if (cpudata->dynamic_epp)
> + return sysfs_emit(buf, "dynamic(profile:%s)\n", energy_perf_strings[preference]);
> +
> return sysfs_emit(buf, "%s\n", energy_perf_strings[preference]);
> }
> EXPORT_SYMBOL_GPL(show_energy_performance_preference);
> @@ -2030,6 +2059,18 @@ static int amd_pstate_epp_set_policy(struct cpufreq_policy *policy)
> if (!policy->cpuinfo.max_freq)
> return -ENODEV;
>
> + /* Must be a switch between PERFORMANCE and POWERSAVE */
> + if (cpudata->policy != policy->policy) {
> + /*
> + * Disable dynamic_epp when switching
> + * out of CPUFREQ_POLICY_POWERSAVE.
> + */
> + if (cpudata->dynamic_epp) {
> + WARN_ON_ONCE(cpudata->policy != CPUFREQ_POLICY_POWERSAVE);
> + amd_pstate_clear_dynamic_epp(policy);
> + }
> + }
> +
> cpudata->policy = policy->policy;
>
> ret = amd_pstate_epp_update_limit(policy, true);
next prev parent reply other threads:[~2026-07-24 18:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-23 20:12 [PATCH v2 0/9] cpufreq/amd-pstate: BIOS min perf fixes and Dynamic EPP rework K Prateek Nayak
2026-07-23 20:12 ` [PATCH v2 1/9] cpufreq/amd-pstate: Set min_limit_freq based on bios_min_perf K Prateek Nayak
2026-07-23 20:12 ` [PATCH v2 2/9] cpufreq/amd-pstate: Remove the defensive check for bios_min_perf K Prateek Nayak
2026-07-23 21:17 ` Mario Limonciello
2026-07-23 20:12 ` [PATCH v2 3/9] cpufreq/amd-pstate: Extract platform profile to EPP conversion into a helper K Prateek Nayak
2026-07-23 20:12 ` [PATCH v2 4/9] cpufreq/amd-pstate: Add dynamic EPP as an "energy_performance_preference" mode K Prateek Nayak
2026-07-24 18:55 ` Mario Limonciello [this message]
2026-07-23 20:12 ` [PATCH v2 5/9] cpufreq/amd-pstate: Remove "amd_dynamic_epp" cmdline and "dynamic_epp" sysfs K Prateek Nayak
2026-07-24 18:55 ` Mario Limonciello
2026-07-23 20:12 ` [PATCH v2 6/9] Documentation/amd-pstate: Update dynamic_epp documentation with new behavior K Prateek Nayak
2026-07-24 18:57 ` Mario Limonciello
2026-07-23 20:12 ` [PATCH v2 7/9] cpufreq/amd-pstate: Reduce the scope of exported symbols K Prateek Nayak
2026-07-23 20:12 ` [PATCH v2 8/9] cpufreq/amd-pstate-ut: Add unit test for "dynamic" EPP mode K Prateek Nayak
2026-07-24 19:04 ` Mario Limonciello
2026-07-23 20:12 ` [PATCH v2 9/9] cpufreq/amd-pstate-ut: Add unit test for CPPC Performance Priority K Prateek Nayak
2026-07-24 19:04 ` Mario Limonciello
2026-07-24 19:07 ` [PATCH v2 0/9] cpufreq/amd-pstate: BIOS min perf fixes and Dynamic EPP rework Mario Limonciello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c58700f8-2d75-4dd5-b30d-aa1f2d95b21c@amd.com \
--to=mario.limonciello@amd.com \
--cc=kprateek.nayak@amd.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=perry.yuan@amd.com \
--cc=rafael@kernel.org \
--cc=ray.huang@amd.com \
--cc=superm1@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox