From: Geert Uytterhoeven <geert+renesas@glider.be>
To: "Uwe Kleine-König" <ukleinek@kernel.org>,
"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
"Laurent Pinchart" <laurent.pinchart+renesas@ideasonboard.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Stephen Boyd" <sboyd@kernel.org>,
"Brian Masney" <bmasney+clk@redhat.com>,
"Jerome Brunet" <jbrunet+clk@baylibre.com>,
"Ulf Hansson" <ulfh@kernel.org>,
"Magnus Damm" <magnus.damm@gmail.com>
Cc: linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
linux-pm@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 00/11] arm64: renesas: r8a78000: Add PWM support
Date: Mon, 26 Oct 2026 15:55:16 +0100 [thread overview]
Message-ID: <cover.1793026273.git.geert+renesas@glider.be> (raw)
Hi all,
This patch series enables PWM support for the Renesas R-Car X5H SoC, as
found on the Renesas Ironhide development board. On this board, clocks,
power-domains, and resets must be accessed only through SCMI firmware.
Just like its GPIO counterpart[1], this series is a bit special, in that
several patches are not meant to be applied upstream yet:
1. The first patch, targeting the PWM tree, documents support for the
16-Bit Timer Pulse Unit (TPU) on R-Car X5H; no driver changes are
needed,
2. Patches 2-6, targeting the PWM tree too, document and add support
for the PWM instances on R-Car X5H, after a few customary
refactorings,
3. Patch 7, targeting a shared DT bindings branch, adds PWM clock
definitions,
4. Patch 8, targeting renesas-devel, adds the various PWM device nodes
to the R-Car X5H .dtsi file,
5. The remaining patches are marked DNI, and depend on code or DTS
that is not yet upstream. More detail can be found in the
individual patches.
PWM instances 0 to 5 and TPU channels 0 and 1 have been tested on
Ironhide using a set of blinkenlights and a logic analyzer.
Thanks for your comments!
[1] "[PATCH 0/7] arm64: renesas: r8a78000: Enable GPIO support"
https://lore.kernel.org/cover.1792776697.git.geert+renesas@glider.be
Geert Uytterhoeven (10):
dt-bindings: pwm: renesas,pwm-rcar: Add support for R-Car X5H
pwm: rcar: Use FIELD_PREP() for PWMCR_CC0 access
pwm: rcar: Add helper variable dev to rcar_pwm_probe()
pwm: rcar: Parametrize cycle counter field size
pwm: rcar: Add support for R-Car Gen5
dt-bindings: clock: renesas,r8a78000-cpg: Add PWM clocks
arm64: dts: renesas: r8a78000: Add PWM nodes
[DNI] clk: renesas: r8a78000: Add PWM clocks
[DNI] pmdomain: renesas: r8a78000: Add PWM support
[DNI] arm64: dts: renesas: ironhide: Enable PWM
Khanh Le (1):
dt-bindings: pwm: renesas,tpu-pwm: Add support for R-Car X5H
.../bindings/pwm/renesas,pwm-rcar.yaml | 61 +++++----
.../bindings/pwm/renesas,tpu-pwm.yaml | 1 +
.../boot/dts/renesas/r8a78000-ironhide.dts | 84 ++++++++++++
arch/arm64/boot/dts/renesas/r8a78000.dtsi | 121 ++++++++++++++++++
drivers/clk/renesas/r8a78000-cpg.c | 6 +
drivers/pmdomain/renesas/r8a78000-mdlc.c | 2 +
drivers/pwm/pwm-rcar.c | 92 ++++++++-----
.../dt-bindings/clock/renesas,r8a78000-cpg.h | 3 +
8 files changed, 312 insertions(+), 58 deletions(-)
--
2.43.0
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next reply other threads:[~2026-10-26 14:55 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-26 14:55 Geert Uytterhoeven [this message]
2026-10-26 14:55 ` [PATCH 01/11] dt-bindings: pwm: renesas,tpu-pwm: Add support for R-Car X5H Geert Uytterhoeven
2026-10-28 13:01 ` Krzysztof Kozlowski
2026-10-26 14:55 ` [PATCH 02/11] dt-bindings: pwm: renesas,pwm-rcar: " Geert Uytterhoeven
2026-10-28 13:06 ` Krzysztof Kozlowski
2026-10-26 14:55 ` [PATCH 03/11] pwm: rcar: Use FIELD_PREP() for PWMCR_CC0 access Geert Uytterhoeven
2026-10-26 14:55 ` [PATCH 04/11] pwm: rcar: Add helper variable dev to rcar_pwm_probe() Geert Uytterhoeven
2026-10-26 14:55 ` [PATCH 05/11] pwm: rcar: Parametrize cycle counter field size Geert Uytterhoeven
2026-10-26 14:55 ` [PATCH 06/11] pwm: rcar: Add support for R-Car Gen5 Geert Uytterhoeven
2026-10-26 14:55 ` [PATCH 07/11] dt-bindings: clock: renesas,r8a78000-cpg: Add PWM clocks Geert Uytterhoeven
2026-10-28 13:07 ` Krzysztof Kozlowski
2026-10-28 13:29 ` Laurent Pinchart
2026-10-28 14:43 ` Geert Uytterhoeven
2026-10-28 16:39 ` Laurent Pinchart
2026-10-26 14:55 ` [PATCH 08/11] arm64: dts: renesas: r8a78000: Add PWM nodes Geert Uytterhoeven
2026-10-26 14:55 ` [PATCH/DNI 09/11] clk: renesas: r8a78000: Add PWM clocks Geert Uytterhoeven
2026-10-26 14:55 ` [PATCH/DNI 10/11] pmdomain: renesas: r8a78000: Add PWM support Geert Uytterhoeven
2026-10-26 14:55 ` [PATCH/DNI 11/11] arm64: dts: renesas: ironhide: Enable PWM Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1793026273.git.geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=bmasney+clk@redhat.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet+clk@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=ukleinek@kernel.org \
--cc=ulfh@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox