[PATCH] interconnect: qcom: Enable Shikra interconnect driver by default for ARCH_QCOM

[PATCH] interconnect: qcom: Enable Shikra interconnect driver by default for ARCH_QCOM

[Raviteja Laggyshetty]

Interconnect drivers provide fundamental NoC bandwidth management
required for correct system behavior. Although systems can boot without
them, power and performance are impacted.
These drivers need to enabled irresepective of the board variant, design
or configuration.

Enable the Shikra interconnect driver by default on ARCH_QCOM by setting
 "default ARCH_QCOM".

Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
---
 drivers/interconnect/qcom/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index 5b8a094ca4ed..baec7eb4c24b 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -333,6 +333,7 @@ config INTERCONNECT_QCOM_SHIKRA
 	tristate "Qualcomm SHIKRA interconnect driver"
 	depends on INTERCONNECT_QCOM
 	depends on QCOM_SMD_RPM
+	default ARCH_QCOM
 	select INTERCONNECT_QCOM_SMD_RPM
 	help
 	  This is a driver for the Qualcomm Network-on-Chip on shikra-based

---
base-commit: d387b06f7c15b4639244ad66b4b0900c6a02b430
change-id: 20260526-shikra_icc_kconfig-97aa253a7132

Best regards,
--  
Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>

Re: [PATCH] interconnect: qcom: Enable Shikra interconnect driver by default for ARCH_QCOM

[Konrad Dybcio]

On 5/26/26 7:21 PM, Raviteja Laggyshetty wrote:
> Interconnect drivers provide fundamental NoC bandwidth management
> required for correct system behavior. Although systems can boot without
> them, power and performance are impacted.
> These drivers need to enabled irresepective of the board variant, design
> or configuration.
> 
> Enable the Shikra interconnect driver by default on ARCH_QCOM by setting
>  "default ARCH_QCOM".
> 
> Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH] interconnect: qcom: Enable Shikra interconnect driver by default for ARCH_QCOM

[Krzysztof Kozlowski]

On 26/05/2026 19:21, Raviteja Laggyshetty wrote:
> Interconnect drivers provide fundamental NoC bandwidth management
> required for correct system behavior. Although systems can boot without
> them, power and performance are impacted.
> These drivers need to enabled irresepective of the board variant, design
> or configuration.
> 
> Enable the Shikra interconnect driver by default on ARCH_QCOM by setting
>  "default ARCH_QCOM".
> 
> Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
> ---
>  drivers/interconnect/qcom/Kconfig | 1 +
>  1 file changed, 1 insertion(+)

Please do not send conflicting works. You saw me doing this and you saw
that my patch was not yet applied and there will be v3.

Best regards,
Krzysztof