From: Auger Eric <eric.auger@redhat.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Alex Williamson <alex.williamson@redhat.com>
Cc: kvm@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] vfio: platform: Fix using devices in PM Domains
Date: Mon, 28 May 2018 22:27:41 +0200 [thread overview]
Message-ID: <ff3992c7-1d59-1fec-1393-47e2d278d8c9@redhat.com> (raw)
In-Reply-To: <1527521165-29345-1-git-send-email-geert+renesas@glider.be>
Hi Geert,
On 05/28/2018 05:26 PM, Geert Uytterhoeven wrote:
> If a device is part of a PM Domain (e.g. power and/or clock domain), its
> power state is managed using Runtime PM. Without Runtime PM, the device
> may not be powered up or clocked, causing subtle failures, crashes, or
> system lock-ups when the device is accessed by the guest.
>
> Fix this by adding Runtime PM support, powering the device when the VFIO
> device is opened by the guest.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
> ---
> v3:
> - Drop controversial note about unsafeness of exporting fine-grained
> power management from host to guest,
thanks ;-)
>
> v2:
> - Improve wording,
> - Add Reviewed-by.
> ---
> drivers/vfio/platform/vfio_platform_common.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
> index b60bb5326668498c..41f862f055054543 100644
> --- a/drivers/vfio/platform/vfio_platform_common.c
> +++ b/drivers/vfio/platform/vfio_platform_common.c
> @@ -17,6 +17,7 @@
> #include <linux/iommu.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> +#include <linux/pm_runtime.h>
> #include <linux/slab.h>
> #include <linux/types.h>
> #include <linux/uaccess.h>
> @@ -233,6 +234,8 @@ static void vfio_platform_release(void *device_data)
> const char *extra_dbg = NULL;
> int ret;
>
> + pm_runtime_put(vdev->device);
> +
> ret = vfio_platform_call_reset(vdev, &extra_dbg);
While reading the code again, the reset is using the HW. Don't you want
to call the get() before.
Thanks
Eric
> if (ret && vdev->reset_required) {
> dev_warn(vdev->device, "reset driver is required and reset call failed in release (%d) %s\n",
> @@ -275,6 +278,10 @@ static int vfio_platform_open(void *device_data)
> ret, extra_dbg ? extra_dbg : "");
> goto err_rst;
> }
> +
> + ret = pm_runtime_get_sync(vdev->device);
> + if (ret < 0)
> + goto err_rst;
> }
>
> vdev->refcnt++;
> @@ -690,6 +697,7 @@ int vfio_platform_probe_common(struct vfio_platform_device *vdev,
>
> mutex_init(&vdev->igate);
>
> + pm_runtime_enable(vdev->device);
> return 0;
>
> put_iommu:
> @@ -707,6 +715,7 @@ struct vfio_platform_device *vfio_platform_remove_common(struct device *dev)
> vdev = vfio_del_group_dev(dev);
>
> if (vdev) {
> + pm_runtime_disable(vdev->device);
> vfio_platform_put_reset(vdev);
> vfio_iommu_group_put(dev->iommu_group, dev);
> }
>
next prev parent reply other threads:[~2018-05-28 20:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-28 15:26 [PATCH v3] vfio: platform: Fix using devices in PM Domains Geert Uytterhoeven
2018-05-28 20:27 ` Auger Eric [this message]
2018-05-28 22:14 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ff3992c7-1d59-1fec-1393-47e2d278d8c9@redhat.com \
--to=eric.auger@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=geert+renesas@glider.be \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox