Linux PWM subsystem development
 help / color / mirror / Atom feed
From: Ben Dooks <ben.dooks@sifive.com>
To: linux-pwm@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Lee Jones <lee.jones@linaro.org>,
	u.kleine-koenig@pengutronix.de,
	Thierry Reding <thierry.reding@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Greentime Hu <greentime.hu@sifive.com>,
	jarkko.nikula@linux.intel.com,
	William Salmon <william.salmon@sifive.com>,
	Jude Onyenegecha <jude.onyenegecha@sifive.com>,
	Ben Dooks <ben.dooks@sifive.com>
Subject: [PATCH v6 07/10] pwm: dwc: make timer clock configurable
Date: Thu, 20 Oct 2022 16:16:07 +0100	[thread overview]
Message-ID: <20221020151610.59443-8-ben.dooks@sifive.com> (raw)
In-Reply-To: <20221020151610.59443-1-ben.dooks@sifive.com>

Add a configurable clock base rate for the pwm as when being built
for non-PCI the block may be sourced from an internal clock.

Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
---
v6:
 - removed DWC_CLK_PERIOD_NS as it is now not needed
v4:
 - moved earlier before the of changes to make the of changes one patch
v2:
  - removed the ifdef and merged the other clock patch in here
---
 drivers/pwm/pwm-dwc-pci.c |  1 +
 drivers/pwm/pwm-dwc.c     | 10 ++++++----
 drivers/pwm/pwm-dwc.h     |  3 ++-
 3 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/pwm/pwm-dwc-pci.c b/drivers/pwm/pwm-dwc-pci.c
index 2213d0e7f3c8..949423e368f9 100644
--- a/drivers/pwm/pwm-dwc-pci.c
+++ b/drivers/pwm/pwm-dwc-pci.c
@@ -20,6 +20,7 @@
 #include <linux/pci.h>
 #include <linux/pm_runtime.h>
 #include <linux/pwm.h>
+#include <linux/clk.h>
 
 #include "pwm-dwc.h"
 
diff --git a/drivers/pwm/pwm-dwc.c b/drivers/pwm/pwm-dwc.c
index 90a8ae1252a1..1251620ab771 100644
--- a/drivers/pwm/pwm-dwc.c
+++ b/drivers/pwm/pwm-dwc.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/clk.h>
 #include <linux/pm_runtime.h>
 #include <linux/pwm.h>
 
@@ -47,13 +48,13 @@ static int __dwc_pwm_configure_timer(struct dwc_pwm *dwc,
 	 * periods and check are the result within HW limits between 1 and
 	 * 2^32 periods.
 	 */
-	tmp = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, DWC_CLK_PERIOD_NS);
+	tmp = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, dwc->clk_ns);
 	if (tmp < 1 || tmp > (1ULL << 32))
 		return -ERANGE;
 	low = tmp - 1;
 
 	tmp = DIV_ROUND_CLOSEST_ULL(state->period - state->duty_cycle,
-				    DWC_CLK_PERIOD_NS);
+				    dwc->clk_ns);
 	if (tmp < 1 || tmp > (1ULL << 32))
 		return -ERANGE;
 	high = tmp - 1;
@@ -128,12 +129,12 @@ static void dwc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	duty = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(pwm->hwpwm));
 	duty += 1;
-	duty *= DWC_CLK_PERIOD_NS;
+	duty *= dwc->clk_ns;
 	state->duty_cycle = duty;
 
 	period = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(pwm->hwpwm));
 	period += 1;
-	period *= DWC_CLK_PERIOD_NS;
+	period *= dwc->clk_ns;
 	period += duty;
 	state->period = period;
 
@@ -156,6 +157,7 @@ struct dwc_pwm *dwc_pwm_alloc(struct device *dev)
 	if (!dwc)
 		return NULL;
 
+	dwc->clk_ns = 10;
 	dwc->chip.dev = dev;
 	dwc->chip.ops = &dwc_pwm_ops;
 	dwc->chip.npwm = DWC_TIMERS_TOTAL;
diff --git a/drivers/pwm/pwm-dwc.h b/drivers/pwm/pwm-dwc.h
index 68f98eb76152..dc451cb2eff5 100644
--- a/drivers/pwm/pwm-dwc.h
+++ b/drivers/pwm/pwm-dwc.h
@@ -22,7 +22,6 @@
 #define DWC_TIMERS_COMP_VERSION	0xac
 
 #define DWC_TIMERS_TOTAL	8
-#define DWC_CLK_PERIOD_NS	10
 
 /* Timer Control Register */
 #define DWC_TIM_CTRL_EN		BIT(0)
@@ -41,6 +40,8 @@ struct dwc_pwm_ctx {
 struct dwc_pwm {
 	struct pwm_chip chip;
 	void __iomem *base;
+	struct clk *clk;
+	unsigned int clk_ns;
 	struct dwc_pwm_ctx ctx[DWC_TIMERS_TOTAL];
 };
 #define to_dwc_pwm(p)	(container_of((p), struct dwc_pwm, chip))
-- 
2.35.1


  parent reply	other threads:[~2022-10-20 15:16 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-20 15:16 [PATCH v6 00/10] Designware PWM driver updates for OF Ben Dooks
2022-10-20 15:16 ` [PATCH v6 01/10] dt-bindings: pwm: Document Synopsys DesignWare snps,pwm-dw-apb-timers-pwm2 Ben Dooks
2022-10-20 15:36   ` Krzysztof Kozlowski
2022-10-24 15:45     ` Ben Dooks
2022-10-20 15:39   ` Uwe Kleine-König
2022-11-17 16:10   ` Uwe Kleine-König
2022-10-20 15:16 ` [PATCH v6 02/10] pwm: dwc: allow driver to be built with COMPILE_TEST Ben Dooks
2022-10-20 15:51   ` Uwe Kleine-König
2022-10-20 15:16 ` [PATCH v6 03/10] pwm: dwc: change &pci->dev to dev in probe Ben Dooks
2022-10-20 15:16 ` [PATCH v6 04/10] pwm: dwc: move memory alloc to own function Ben Dooks
2022-11-10 15:35   ` Uwe Kleine-König
2022-10-20 15:16 ` [PATCH v6 05/10] pwm: dwc: use devm_pwmchip_add Ben Dooks
2022-10-20 15:55   ` Uwe Kleine-König
2022-10-20 15:16 ` [PATCH v6 06/10] pwm: dwc: split pci out of core driver Ben Dooks
2022-11-10 15:29   ` Uwe Kleine-König
2022-11-10 16:35     ` Ben Dooks
2022-11-17 16:15       ` Uwe Kleine-König
2022-10-20 15:16 ` Ben Dooks [this message]
2022-11-10 15:39   ` [PATCH v6 07/10] pwm: dwc: make timer clock configurable Uwe Kleine-König
2022-10-20 15:16 ` [PATCH v6 08/10] pwm: dwc: add of/platform support Ben Dooks
2022-10-20 15:16 ` [PATCH v6 09/10] pwm: dwc: add PWM bit unset in get_state call Ben Dooks
2022-10-20 15:16 ` [PATCH v6 10/10] pwm: dwc: use clock rate in hz to avoid rounding issues Ben Dooks
2022-11-10 15:42   ` Uwe Kleine-König
2022-11-10 16:29     ` Ben Dooks
2022-10-24  8:39 ` [PATCH v6 00/10] Designware PWM driver updates for OF Jarkko Nikula
2022-10-24 15:40   ` Ben Dooks
2022-11-08 11:19   ` Ben Dooks
2022-11-08 11:48     ` Uwe Kleine-König

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221020151610.59443-8-ben.dooks@sifive.com \
    --to=ben.dooks@sifive.com \
    --cc=devicetree@vger.kernel.org \
    --cc=greentime.hu@sifive.com \
    --cc=jarkko.nikula@linux.intel.com \
    --cc=jude.onyenegecha@sifive.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=william.salmon@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox