[PATCH v4 27/28] gcc-sdm845: Add general purpose clock ops

[PATCH v4 27/28] gcc-sdm845: Add general purpose clock ops

[Dzmitry Sankouski]

SDM845 has "General Purpose" clocks that can be muxed to
SoC pins to clock various external devices.
Those clocks may be used as e.g. PWM sources for external peripherals.

GPCLK can in theory have arbitrary value depending on the use case, so
the concept of frequency tables, used in rcg2 clock driver, is not
efficient, because it allows only defined frequencies.

Introduce clk_rcg2_gp_ops, which automatically calculate clock
mnd values for arbitrary clock rate.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
 drivers/clk/qcom/clk-rcg.h    |   1 +
 drivers/clk/qcom/clk-rcg2.c   | 162 ++++++++++++++++++++++++++++++++++++++++--
 drivers/clk/qcom/gcc-sdm845.c |  19 ++---
 drivers/pwm/pwm-clk.c         |   5 ++
 4 files changed, 167 insertions(+), 20 deletions(-)

diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
index d7414361e432..5bd86bce0c4d 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -189,6 +189,7 @@ struct clk_rcg2_gfx3d {
 	container_of(to_clk_rcg2(_hw), struct clk_rcg2_gfx3d, rcg)
 
 extern const struct clk_ops clk_rcg2_ops;
+extern const struct clk_ops clk_rcg2_gp_ops;
 extern const struct clk_ops clk_rcg2_floor_ops;
 extern const struct clk_ops clk_rcg2_fm_ops;
 extern const struct clk_ops clk_rcg2_mux_closest_ops;
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 9b3aaa7f20ac..addfa7f59be8 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -32,6 +32,7 @@
 
 #define CFG_REG			0x4
 #define CFG_SRC_DIV_SHIFT	0
+#define CFG_SRC_DIV_LENGTH	8
 #define CFG_SRC_SEL_SHIFT	8
 #define CFG_SRC_SEL_MASK	(0x7 << CFG_SRC_SEL_SHIFT)
 #define CFG_MODE_SHIFT		12
@@ -393,16 +394,103 @@ static int clk_rcg2_fm_determine_rate(struct clk_hw *hw,
 	return _freq_tbl_fm_determine_rate(hw, rcg->freq_multi_tbl, req);
 }
 
-static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f,
-				u32 *_cfg)
+static inline u64 find_hcf(u64 a, u64 b)
+{
+	while (a != 0 && b != 0) {
+		if (a > b)
+			a %= b;
+		else
+			b %= a;
+	}
+	return a + b;
+}
+
+static int clk_calc_mnd(u64 parent_rate, u64 rate, struct freq_tbl *f)
+{
+	u64 hcf;
+	u64 hid_div = 1, n = 1;
+	int i = 2, count = 0;
+
+	hcf = find_hcf(parent_rate, rate);
+	u64 scaled_rate = rate / hcf;
+	u64 scaled_parent_rate = parent_rate / hcf;
+
+	while (scaled_parent_rate > 1) {
+		while (scaled_parent_rate % i == 0) {
+			scaled_parent_rate /= i;
+			if (count % 2 == 0)
+				hid_div *= i;
+			else
+				n *= i;
+		}
+		i++;
+		count++;
+	}
+
+	f->m = scaled_rate;
+	f->n = n;
+	f->pre_div = hid_div;
+
+	return 0;
+}
+
+static int clk_rcg2_determine_gp_rate(struct clk_hw *hw,
+				   struct clk_rate_request *req)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	struct freq_tbl *f;
+	int src = clk_rcg2_get_parent(hw);
+	int mnd_max = BIT(rcg->mnd_width) - 1;
+	int hid_max = BIT(rcg->hid_width) - 1;
+	u64 parent_rate;
+	int ret;
+
+	parent_rate = rcg->freq_tbl[src].freq;
+	f = kcalloc(MAX_PERF_LEVEL + 1, sizeof(f), GFP_KERNEL);
+
+	if (!f)
+		return 0;
+
+	ret = clk_calc_mnd(parent_rate, req->rate, f);
+	if (ret)
+		return 0;
+
+
+	while (f->n - f->m >= mnd_max) {
+		f->m = f->m >> 1;
+		f->n = f->n >> 1;
+	}
+	while (f->pre_div >= hid_max) {
+		f->pre_div = f->pre_div >> 1;
+		f->m = f->m >> 1;
+	}
+
+	req->rate = calc_rate(parent_rate, f->m, f->n, f->n, f->pre_div);
+
+	return 0;
+}
+
+static int __clk_rcg2_configure_parent(struct clk_rcg2 *rcg, int src, u32 *_cfg)
 {
-	u32 cfg, mask, d_val, not2d_val, n_minus_m;
 	struct clk_hw *hw = &rcg->clkr.hw;
-	int ret, index = qcom_find_src_index(hw, rcg->parent_map, f->src);
+	u32 mask = CFG_SRC_SEL_MASK;
+	int index = qcom_find_src_index(hw, rcg->parent_map, src);
 
 	if (index < 0)
 		return index;
 
+	*_cfg &= ~mask;
+	*_cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
+
+	return 0;
+}
+
+static int __clk_rcg2_configure_mnd(struct clk_rcg2 *rcg, const struct freq_tbl *f,
+				u32 *_cfg)
+{
+	u32 cfg, mask, d_val, not2d_val, n_minus_m;
+	int ret;
+
 	if (rcg->mnd_width && f->n) {
 		mask = BIT(rcg->mnd_width) - 1;
 		ret = regmap_update_bits(rcg->clkr.regmap,
@@ -431,9 +519,8 @@ static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f,
 	}
 
 	mask = BIT(rcg->hid_width) - 1;
-	mask |= CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK;
+	mask |= CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK;
 	cfg = f->pre_div << CFG_SRC_DIV_SHIFT;
-	cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
 	if (rcg->mnd_width && f->n && (f->m != f->n))
 		cfg |= CFG_MODE_DUAL_EDGE;
 	if (rcg->hw_clk_ctrl)
@@ -445,6 +532,22 @@ static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f,
 	return 0;
 }
 
+static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f,
+				u32 *_cfg)
+{
+	int ret;
+
+	ret = __clk_rcg2_configure_parent(rcg, f->src, _cfg);
+	if (ret)
+		return ret;
+
+	ret = __clk_rcg2_configure_mnd(rcg, f, _cfg);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
 {
 	u32 cfg;
@@ -465,6 +568,26 @@ static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
 	return update_config(rcg);
 }
 
+static int clk_rcg2_configure_gp(struct clk_rcg2 *rcg, const struct freq_tbl *f)
+{
+	u32 cfg;
+	int ret;
+
+	ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg);
+	if (ret)
+		return ret;
+
+	ret = __clk_rcg2_configure_mnd(rcg, f, &cfg);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), cfg);
+	if (ret)
+		return ret;
+
+	return update_config(rcg);
+}
+
 static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate,
 			       enum freq_policy policy)
 {
@@ -518,6 +641,22 @@ static int clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate,
 	return __clk_rcg2_set_rate(hw, rate, CEIL);
 }
 
+static int clk_rcg2_set_gp_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	struct freq_tbl *f;
+
+	f = kcalloc(MAX_PERF_LEVEL + 1, sizeof(*f), GFP_KERNEL);
+
+	if (!f)
+		return -ENOMEM;
+
+	clk_calc_mnd(parent_rate, rate, f);
+
+	return clk_rcg2_configure_gp(rcg, f);
+}
+
 static int clk_rcg2_set_floor_rate(struct clk_hw *hw, unsigned long rate,
 				   unsigned long parent_rate)
 {
@@ -645,6 +784,17 @@ const struct clk_ops clk_rcg2_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_rcg2_ops);
 
+const struct clk_ops clk_rcg2_gp_ops = {
+	.is_enabled = clk_rcg2_is_enabled,
+	.get_parent = clk_rcg2_get_parent,
+	.set_parent = clk_rcg2_set_parent,
+	.determine_rate = clk_rcg2_determine_gp_rate,
+	.set_rate = clk_rcg2_set_gp_rate,
+	.get_duty_cycle = clk_rcg2_get_duty_cycle,
+	.set_duty_cycle = clk_rcg2_set_duty_cycle,
+};
+EXPORT_SYMBOL_GPL(clk_rcg2_gp_ops);
+
 const struct clk_ops clk_rcg2_floor_ops = {
 	.is_enabled = clk_rcg2_is_enabled,
 	.get_parent = clk_rcg2_get_parent,
diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
index 8d61d5a31542..1fb617b0ee47 100644
--- a/drivers/clk/qcom/gcc-sdm845.c
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -291,18 +291,9 @@ static struct clk_rcg2 gcc_sdm670_cpuss_rbcpr_clk_src = {
  * See comment in gcc-mam8916.c at ftbl_gcc_gp1_3_clk.
  */
 static const struct freq_tbl ftbl_gcc_gp1_clk_src[] = {
-	F(10000,   P_BI_TCXO,    16,  1, 120),
-	F(20000,   P_BI_TCXO,    16,  1, 60),
-	F(100000,  P_BI_TCXO,    16,  1,  12),
-	F(500000,  P_GPLL0_OUT_EVEN, 12, 1, 100),
-	F(1000000, P_GPLL0_OUT_EVEN, 12, 1, 50),
-	F(2500000, P_GPLL0_OUT_EVEN, 12, 1, 10),
-	F(5000000, P_GPLL0_OUT_EVEN, 12, 1, 5),
 	F(19200000, P_BI_TCXO, 1, 0, 0),
-	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
-	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
-	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
-	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	F(300000000, P_GPLL0_OUT_EVEN, 1, 0, 0),
+	F(600000000, P_GPLL0_OUT_MAIN, 1, 0, 0),
 	{ }
 };
 
@@ -316,7 +307,7 @@ static struct clk_rcg2 gcc_gp1_clk_src = {
 		.name = "gcc_gp1_clk_src",
 		.parent_data = gcc_parent_data_1,
 		.num_parents = ARRAY_SIZE(gcc_parent_data_1),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_gp_ops,
 	},
 };
 
@@ -330,7 +321,7 @@ static struct clk_rcg2 gcc_gp2_clk_src = {
 		.name = "gcc_gp2_clk_src",
 		.parent_data = gcc_parent_data_1,
 		.num_parents = ARRAY_SIZE(gcc_parent_data_1),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_gp_ops,
 	},
 };
 
@@ -344,7 +335,7 @@ static struct clk_rcg2 gcc_gp3_clk_src = {
 		.name = "gcc_gp3_clk_src",
 		.parent_data = gcc_parent_data_1,
 		.num_parents = ARRAY_SIZE(gcc_parent_data_1),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_gp_ops,
 	},
 };
 
diff --git a/drivers/pwm/pwm-clk.c b/drivers/pwm/pwm-clk.c
index c19a482d7e28..1bfc7870e3aa 100644
--- a/drivers/pwm/pwm-clk.c
+++ b/drivers/pwm/pwm-clk.c
@@ -25,6 +25,7 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/clk/clk-conf.h>
 #include <linux/pwm.h>
 
 struct pwm_clk_chip {
@@ -87,6 +88,10 @@ static int pwm_clk_probe(struct platform_device *pdev)
 	struct pwm_clk_chip *pcchip;
 	int ret;
 
+	ret = of_clk_set_defaults(pdev->dev.of_node, false);
+	if (ret < 0)
+		return -EINVAL;
+
 	chip = devm_pwmchip_alloc(&pdev->dev, 1, sizeof(*pcchip));
 	if (IS_ERR(chip))
 		return PTR_ERR(chip);

-- 
2.39.2

Re: [PATCH v4 27/28] gcc-sdm845: Add general purpose clock ops

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 1149 bytes --]

Hello,

On Fri, Jul 19, 2024 at 03:55:04PM +0300, Dzmitry Sankouski wrote:
> SDM845 has "General Purpose" clocks that can be muxed to
> SoC pins to clock various external devices.
> Those clocks may be used as e.g. PWM sources for external peripherals.
> 
> GPCLK can in theory have arbitrary value depending on the use case, so
> the concept of frequency tables, used in rcg2 clock driver, is not
> efficient, because it allows only defined frequencies.
> 
> Introduce clk_rcg2_gp_ops, which automatically calculate clock
> mnd values for arbitrary clock rate.
> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
> ---
>  drivers/clk/qcom/clk-rcg.h    |   1 +
>  drivers/clk/qcom/clk-rcg2.c   | 162 ++++++++++++++++++++++++++++++++++++++++--
>  drivers/clk/qcom/gcc-sdm845.c |  19 ++---
>  drivers/pwm/pwm-clk.c         |   5 ++

I don't understand why a change to some qcom clk implementation detail
needs a change to drivers/pwm/pwm-clk.c in the same commit. I guess if
the change to drivers/pwm/pwm-clk.c is needed it should better go into a
separate patch with an appropriate commit log?!

Best regards
Uwe

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v4 27/28] gcc-sdm845: Add general purpose clock ops

[Dzmitry Sankouski]

вт, 10 сент. 2024 г. в 12:59, Uwe Kleine-König <u.kleine-koenig@baylibre.com>:
>
> Hello,
>
> On Fri, Jul 19, 2024 at 03:55:04PM +0300, Dzmitry Sankouski wrote:
> > SDM845 has "General Purpose" clocks that can be muxed to
> > SoC pins to clock various external devices.
> > Those clocks may be used as e.g. PWM sources for external peripherals.
> >
> > GPCLK can in theory have arbitrary value depending on the use case, so
> > the concept of frequency tables, used in rcg2 clock driver, is not
> > efficient, because it allows only defined frequencies.
> >
> > Introduce clk_rcg2_gp_ops, which automatically calculate clock
> > mnd values for arbitrary clock rate.
> >
> > Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
> > ---
> >  drivers/clk/qcom/clk-rcg.h    |   1 +
> >  drivers/clk/qcom/clk-rcg2.c   | 162 ++++++++++++++++++++++++++++++++++++++++--
> >  drivers/clk/qcom/gcc-sdm845.c |  19 ++---
> >  drivers/pwm/pwm-clk.c         |   5 ++
>
> I don't understand why a change to some qcom clk implementation detail
> needs a change to drivers/pwm/pwm-clk.c in the same commit. I guess if
> the change to drivers/pwm/pwm-clk.c is needed it should better go into a
> separate patch with an appropriate commit log?!
>
You're right, I'll fix that. Also I heavily rewrote this patch, and
included it in
starqltechn patch series. Since this patch has the wrong version (sorry for my
mistake) and order numbering, please consider the next patch a successor of it.

-- 

Best regards,
Dzmitry