From: "Tim Harvey" <tharvey@alumni.calpoly.edu>
To: linux-raid@vger.kernel.org
Subject: Ateonix NASAS 2040 NAS device - recovering RAID5 array
Date: Thu, 27 May 2004 15:15:55 -0700 [thread overview]
Message-ID: <003201c44438$2fbd50d0$7001a8c0@darwin> (raw)
Greetings,
I have an Ateonix NASAS 2040 NAS device that has gone bad. Specifically
the flash based OS (which is provided by a PCI 'flash disk' module made
by Ateonix) is not booting because of a power glitch while that occurred
obviously at a bad moment in time (while it was recovering from another
glitch I believe)).
Does anyone else out there have much knowledge of these devices? I've
had mine running 24/7 for about 9 months now without incident. I've
learned since that the company has gone out of business (unfortunate, it
was a great entry-level product).
I'm looking for anyone that may have firmware update files for it and
any knowledge on how it operates. Specifically, I'm interested in
finding out how I can reset the unit to factory defaults while 'not'
loosing the data on the existing array. Also, I'm curious if anyone has
found a way to get into the Linux OS (I've hooked up a keyboard/monitor
to the mboard, but I can't get any prompt, nor have I been able to find
any ports open for telnet/ssh). Its not something they supported, but
I'm thinking there may be an unsupported/undocumented way.
Any info on this product would be greatly appreciated!
Thanks,
Tim
reply other threads:[~2004-05-27 22:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='003201c44438$2fbd50d0$7001a8c0@darwin' \
--to=tharvey@alumni.calpoly.edu \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox