Linux RAID subsystem development
 help / color / mirror / Atom feed
* Help!  Head crash on IDE Seconday Master.  Slave has all the data but wont boot
@ 2002-11-23 12:38 Stuart Levine
  2002-11-24  1:01 ` Massimiliano Masserelli
  0 siblings, 1 reply; 2+ messages in thread
From: Stuart Levine @ 2002-11-23 12:38 UTC (permalink / raw)
  To: linux-raid

[-- Attachment #1: Type: text/plain, Size: 1208 bytes --]

Hi,

So I build this great new P4 2.53GHz server.  I had two WD 100GB Caviar 
Special editions running in a RAID1 format.  All seemed fine except one 
drive was very noisy and caused excessive vibrations.  Thought nothing 
of it because it's less than a month old.  Well, I was wrong, very 
wrong.  Last night the drive failed and the next boot up sequence left 
me with sound I will never forget.  Anyway, until I get a new drive to 
rebuild and supplant the array, I was going to boot from /dev/md0 (/boot 
partition) but to no avail the system does not want to recognize it as a 
boot disk.  If I boot up in rescue mode, it says there are no partitions 
on the disk (/dev/md0).  However, if I use the fdisk -l I get what you 
would expect including a BOOT partition.  Luckily, I did make the 
emergency boot floppy and I am able to boot the system on from that 
floppy for the ROOT partition on the disk /dev/md2.  So, how do I tell 
the boot loader to look at /dev/hdd instead of /dev/hdc (the dead disk 
in the raid pair) without loosing my installed data?  I now new to RAID, 
however, I am new to software RAID in Linux.  Any help and advise would 
be greatly appreciated.

Thanks in advance,

Stuart

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3253 bytes --]

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2002-11-24  1:01 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-23 12:38 Help! Head crash on IDE Seconday Master. Slave has all the data but wont boot Stuart Levine
2002-11-24  1:01 ` Massimiliano Masserelli

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox