Linux RAID subsystem development
 help / color / mirror / Atom feed
From: Richard Scobie <richard@sauce.co.nz>
To: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: Jan Wagner <jwagner@kurp.hut.fi>, linux-raid@vger.kernel.org
Subject: Re: single RAID slower than aggregate multi-RAID?
Date: Sat, 16 Aug 2008 09:53:15 +1200	[thread overview]
Message-ID: <48A5FACB.2090302@sauce.co.nz> (raw)
In-Reply-To: <alpine.DEB.1.10.0808151528090.25378@p34.internal.lan>

Justin Piszcz wrote:

> Because you are using port-multipliers, they do not allocate full 
> bandwidth to each HDD simultaneously.  You will get a maximum of 3gbps 
> per each port, but if you are reading from 12 ports into a single 3gbps 
> port?

Jan's setup is 3 drives on each port multiplier, which are each attached 
to a port on the controller, so should be just on the limit of the 3Gb/s 
link between controller and multiplier.

According to this, with the same controller and 12 portmultiplied 
Seagate drives on a Mac, in one single RAID 0, you should see just under 
700MB/s peak, so there may be room for improvement yet.

http://www.amug.org/amug-web/html/amug/reviews/articles/addonics/adsa3gpx8-4em/

Regards,

Richard

  reply	other threads:[~2008-08-15 21:53 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-15 13:55 single RAID slower than aggregate multi-RAID? Jan Wagner
2008-08-15 19:35 ` Justin Piszcz
2008-08-15 21:53   ` Richard Scobie [this message]
2008-08-15 22:02 ` Neil Brown
2008-08-18 10:48   ` Jan Wagner
2008-08-18 11:54     ` Neil Brown
2008-08-18 12:27       ` Jan Wagner
2008-08-20 12:24         ` Jan Wagner
2008-08-21  7:34           ` Peter Grandi
2008-08-26  8:27             ` Jan Wagner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48A5FACB.2090302@sauce.co.nz \
    --to=richard@sauce.co.nz \
    --cc=jpiszcz@lucidpixels.com \
    --cc=jwagner@kurp.hut.fi \
    --cc=linux-raid@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox