* Setting up raid 1 on existing installation
@ 2003-02-12 7:45 Philippe Dhont (Sea-ro)
0 siblings, 0 replies; only message in thread
From: Philippe Dhont (Sea-ro) @ 2003-02-12 7:45 UTC (permalink / raw)
To: 'linux-raid@vger.kernel.org'
Hi all,
I installed raid 1 on an existing installation.
Almost everything works, i can install the raid in degraded mode (so that i
later on put the first hdd also in the raid and i don't have to reinstall
everything that way, you know how it works...) but there is always one
problem coming back and it seems that i have to many problems with it to set
it right.
The problem is that after i copied everything to the new disk in the raid1
that i can't get the new raid1 bootable, different manuals say different
thinks.
Can someone please tell me how it will really work ? Or how i really have to
do it ? Maybe send me some lilo.conf or something ?
Thnx a lot!!
Philippe Dhont
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-02-12 7:45 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-02-12 7:45 Setting up raid 1 on existing installation Philippe Dhont (Sea-ro)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox