From: Roland Dreier <roland-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 1/3] mlx4_core: Stash PCI ID driver_data in mlx4_priv structure
Date: Thu, 27 Sep 2012 10:47:15 -0700 [thread overview]
Message-ID: <1348768037-3660-1-git-send-email-roland@kernel.org> (raw)
From: Roland Dreier <roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org>
That way we can check flags later on, when we've finished with the
pci_device_id structure. Also convert the "is VF" flag to an enum:
"Never do in the preprocessor what can be done in C."
Signed-off-by: Roland Dreier <roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org>
---
drivers/net/ethernet/mellanox/mlx4/main.c | 29 ++++++++++++++++-------------
drivers/net/ethernet/mellanox/mlx4/mlx4.h | 6 ++++++
2 files changed, 22 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 9f06e04..ef1a39d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -95,8 +95,6 @@ MODULE_PARM_DESC(log_num_mgm_entry_size, "log mgm size, that defines the num"
" Not in use with device managed"
" flow steering");
-#define MLX4_VF (1 << 0)
-
#define HCA_GLOBAL_CAP_MASK 0
#define PF_CONTEXT_BEHAVIOUR_MASK 0
@@ -1915,7 +1913,7 @@ static void mlx4_free_ownership(struct mlx4_dev *dev)
iounmap(owner);
}
-static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data)
{
struct mlx4_priv *priv;
struct mlx4_dev *dev;
@@ -1938,12 +1936,11 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
/*
* Check for BARs.
*/
- if (((id == NULL) || !(id->driver_data & MLX4_VF)) &&
+ if (!(pci_dev_data & MLX4_PCI_DEV_IS_VF) &&
!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
dev_err(&pdev->dev, "Missing DCS, aborting."
- "(id == 0X%p, id->driver_data: 0x%lx,"
- " pci_resource_flags(pdev, 0):0x%lx)\n", id,
- id ? id->driver_data : 0, pci_resource_flags(pdev, 0));
+ "(driver_data: 0x%x, pci_resource_flags(pdev, 0):0x%lx)\n",
+ pci_dev_data, pci_resource_flags(pdev, 0));
err = -ENODEV;
goto err_disable_pdev;
}
@@ -2008,7 +2005,7 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
dev->rev_id = pdev->revision;
/* Detect if this device is a virtual function */
- if (id && id->driver_data & MLX4_VF) {
+ if (pci_dev_data & MLX4_PCI_DEV_IS_VF) {
/* When acting as pf, we normally skip vfs unless explicitly
* requested to probe them. */
if (num_vfs && extended_func_num(pdev) > probe_vf) {
@@ -2154,6 +2151,7 @@ slave_start:
mlx4_sense_init(dev);
mlx4_start_sense(dev);
+ priv->pci_dev_data = pci_dev_data;
pci_set_drvdata(pdev, dev);
return 0;
@@ -2223,7 +2221,7 @@ static int __devinit mlx4_init_one(struct pci_dev *pdev,
{
printk_once(KERN_INFO "%s", mlx4_version);
- return __mlx4_init_one(pdev, id);
+ return __mlx4_init_one(pdev, id->driver_data);
}
static void mlx4_remove_one(struct pci_dev *pdev)
@@ -2303,8 +2301,13 @@ static void mlx4_remove_one(struct pci_dev *pdev)
int mlx4_restart_one(struct pci_dev *pdev)
{
+ struct mlx4_dev *dev = pci_get_drvdata(pdev);
+ struct mlx4_priv *priv = mlx4_priv(dev);
+ int pci_dev_data;
+
+ pci_dev_data = priv->pci_dev_data;
mlx4_remove_one(pdev);
- return __mlx4_init_one(pdev, NULL);
+ return __mlx4_init_one(pdev, pci_dev_data);
}
static DEFINE_PCI_DEVICE_TABLE(mlx4_pci_table) = {
@@ -2333,11 +2336,11 @@ static DEFINE_PCI_DEVICE_TABLE(mlx4_pci_table) = {
/* MT26478 ConnectX2 40GigE PCIe gen2 */
{ PCI_VDEVICE(MELLANOX, 0x676e), 0 },
/* MT25400 Family [ConnectX-2 Virtual Function] */
- { PCI_VDEVICE(MELLANOX, 0x1002), MLX4_VF },
+ { PCI_VDEVICE(MELLANOX, 0x1002), MLX4_PCI_DEV_IS_VF },
/* MT27500 Family [ConnectX-3] */
{ PCI_VDEVICE(MELLANOX, 0x1003), 0 },
/* MT27500 Family [ConnectX-3 Virtual Function] */
- { PCI_VDEVICE(MELLANOX, 0x1004), MLX4_VF },
+ { PCI_VDEVICE(MELLANOX, 0x1004), MLX4_PCI_DEV_IS_VF },
{ PCI_VDEVICE(MELLANOX, 0x1005), 0 }, /* MT27510 Family */
{ PCI_VDEVICE(MELLANOX, 0x1006), 0 }, /* MT27511 Family */
{ PCI_VDEVICE(MELLANOX, 0x1007), 0 }, /* MT27520 Family */
@@ -2366,7 +2369,7 @@ static pci_ers_result_t mlx4_pci_err_detected(struct pci_dev *pdev,
static pci_ers_result_t mlx4_pci_slot_reset(struct pci_dev *pdev)
{
- int ret = __mlx4_init_one(pdev, NULL);
+ int ret = __mlx4_init_one(pdev, 0);
return ret ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index 1bb3e5e..65f73d6 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -692,6 +692,10 @@ struct mlx4_steer {
struct list_head steer_entries[MLX4_NUM_STEERS];
};
+enum {
+ MLX4_PCI_DEV_IS_VF = 1 << 0,
+};
+
struct mlx4_priv {
struct mlx4_dev dev;
@@ -699,6 +703,8 @@ struct mlx4_priv {
struct list_head ctx_list;
spinlock_t ctx_lock;
+ int pci_dev_data;
+
struct list_head pgdir_list;
struct mutex pgdir_mutex;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2012-09-27 17:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-27 17:47 Roland Dreier [this message]
[not found] ` <1348768037-3660-1-git-send-email-roland-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2012-09-27 17:47 ` [PATCH 2/3] mlx4_core: Clean up enabling of SENSE_PORT for older (ConnectX-1/-2) HCAs Roland Dreier
2012-09-27 17:47 ` [PATCH 3/3] mlx4_core: Disable SENSE_PORT for multifunction devices Roland Dreier
[not found] ` <1348768037-3660-3-git-send-email-roland-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2012-09-27 20:58 ` Or Gerlitz
[not found] ` <CAJZOPZLSBk0GEK-8SCAoXR0qCzpG9_P5nrWcWJ-vhcnKZAKvjg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2012-10-02 8:52 ` Jack Morgenstein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348768037-3660-1-git-send-email-roland@kernel.org \
--to=roland-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox