From: Wang Yufen <wangyufen@huawei.com>
To: <bvanassche@acm.org>, <jgg@ziepe.ca>, <leon@kernel.org>,
<dennis.dalessandro@cornelisnetworks.com>
Cc: <linux-rdma@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<andriy.shevchenko@linux.intel.com>, <bart.vanassche@wdc.com>,
<easwar.hariharan@intel.com>, Wang Yufen <wangyufen@huawei.com>
Subject: [PATCH v2 2/2] RDMA/srp: Fix error return code in srp_parse_options()
Date: Sat, 26 Nov 2022 11:35:04 +0800 [thread overview]
Message-ID: <1669433704-2254-2-git-send-email-wangyufen@huawei.com> (raw)
In-Reply-To: <1669433704-2254-1-git-send-email-wangyufen@huawei.com>
In the previous while loop, "ret" may be assigned zero, , so the error
return code may be incorrectly set to 0 instead of -EINVAL.
Add out_with_einval goto label and covert all "goto out;" to "goto
out_with_einval:" where it's appropriate, alse investigate each case
separately as Andy suggessted.
Fixes: e711f968c49c ("IB/srp: replace custom implementation of hex2bin()")
Fixes: 2a174df0c602 ("IB/srp: Use kstrtoull() instead of simple_strtoull()")
Fixes: 19f313438c77 ("IB/srp: Add RDMA/CM support")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
---
drivers/infiniband/ulp/srp/ib_srp.c | 82 +++++++++++++++++++++++++------------
1 file changed, 56 insertions(+), 26 deletions(-)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 1075c2a..865ceb1 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -3343,7 +3343,7 @@ static int srp_parse_options(struct net *net, const char *buf,
bool has_port;
int opt_mask = 0;
int token;
- int ret = -EINVAL;
+ int ret;
int i;
options = kstrdup(buf, GFP_KERNEL);
@@ -3410,7 +3410,8 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_PKEY:
- if (match_hex(args, &token)) {
+ ret = match_hex(args, &token);
+ if (ret) {
pr_warn("bad P_Key parameter '%s'\n", p);
goto out;
}
@@ -3470,7 +3471,8 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_MAX_SECT:
- if (match_int(args, &token)) {
+ ret = match_int(args, &token);
+ if (ret) {
pr_warn("bad max sect parameter '%s'\n", p);
goto out;
}
@@ -3478,9 +3480,12 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_QUEUE_SIZE:
- if (match_int(args, &token) || token < 1) {
- pr_warn("bad queue_size parameter '%s'\n", p);
+ ret = match_int(args, &token);
+ if (ret)
goto out;
+ if (token < 1) {
+ pr_warn("bad queue_size parameter '%s'\n", p);
+ goto out_with_einval;
}
target->scsi_host->can_queue = token;
target->queue_size = token + SRP_RSP_SQ_SIZE +
@@ -3490,25 +3495,30 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_MAX_CMD_PER_LUN:
- if (match_int(args, &token) || token < 1) {
+ ret = match_int(args, &token);
+ if (ret)
+ goto out;
+ if (token < 1) {
pr_warn("bad max cmd_per_lun parameter '%s'\n",
p);
- goto out;
+ goto out_with_einval;
}
target->scsi_host->cmd_per_lun = token;
break;
case SRP_OPT_TARGET_CAN_QUEUE:
- if (match_int(args, &token) || token < 1) {
+ ret = match_int(args, &token);
+ if (token < 1) {
pr_warn("bad max target_can_queue parameter '%s'\n",
p);
- goto out;
+ goto out_with_einval;
}
target->target_can_queue = token;
break;
case SRP_OPT_IO_CLASS:
- if (match_hex(args, &token)) {
+ ret = match_hex(args, &token);
+ if (ret) {
pr_warn("bad IO class parameter '%s'\n", p);
goto out;
}
@@ -3517,7 +3527,7 @@ static int srp_parse_options(struct net *net, const char *buf,
pr_warn("unknown IO class parameter value %x specified (use %x or %x).\n",
token, SRP_REV10_IB_IO_CLASS,
SRP_REV16A_IB_IO_CLASS);
- goto out;
+ goto out_with_einval;
}
target->io_class = token;
break;
@@ -3539,16 +3549,20 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_CMD_SG_ENTRIES:
- if (match_int(args, &token) || token < 1 || token > 255) {
+ ret = match_int(args, &token);
+ if (ret)
+ goto out;
+ if (token < 1 || token > 255) {
pr_warn("bad max cmd_sg_entries parameter '%s'\n",
p);
- goto out;
+ goto out_with_einval;
}
target->cmd_sg_cnt = token;
break;
case SRP_OPT_ALLOW_EXT_SG:
- if (match_int(args, &token)) {
+ ret = match_int(args, &token);
+ if (ret) {
pr_warn("bad allow_ext_sg parameter '%s'\n", p);
goto out;
}
@@ -3556,44 +3570,58 @@ static int srp_parse_options(struct net *net, const char *buf,
break;
case SRP_OPT_SG_TABLESIZE:
- if (match_int(args, &token) || token < 1 ||
- token > SG_MAX_SEGMENTS) {
+ ret = match_int(args, &token);
+ if (ret)
+ goto out;
+ if (token < 1 || token > SG_MAX_SEGMENTS) {
pr_warn("bad max sg_tablesize parameter '%s'\n",
p);
- goto out;
+ goto out_with_einval;
}
target->sg_tablesize = token;
break;
case SRP_OPT_COMP_VECTOR:
- if (match_int(args, &token) || token < 0) {
- pr_warn("bad comp_vector parameter '%s'\n", p);
+ ret = match_int(args, &token);
+ if (ret)
goto out;
+ if (token < 0) {
+ pr_warn("bad comp_vector parameter '%s'\n", p);
+ goto out_with_einval;
}
target->comp_vector = token;
break;
case SRP_OPT_TL_RETRY_COUNT:
- if (match_int(args, &token) || token < 2 || token > 7) {
+ ret = match_int(args, &token);
+ if (ret)
+ goto out;
+ if (token < 2 || token > 7) {
pr_warn("bad tl_retry_count parameter '%s' (must be a number between 2 and 7)\n",
p);
- goto out;
+ goto out_with_einval;
}
target->tl_retry_count = token;
break;
case SRP_OPT_MAX_IT_IU_SIZE:
- if (match_int(args, &token) || token < 0) {
- pr_warn("bad maximum initiator to target IU size '%s'\n", p);
+ ret = match_int(args, &token);
+ if (ret)
goto out;
+ if (token < 0) {
+ pr_warn("bad maximum initiator to target IU size '%s'\n", p);
+ goto out_with_einval;
}
target->max_it_iu_size = token;
break;
case SRP_OPT_CH_COUNT:
- if (match_int(args, &token) || token < 1) {
- pr_warn("bad channel count %s\n", p);
+ ret = match_int(args, &token);
+ if (ret)
goto out;
+ if (token < 1) {
+ pr_warn("bad channel count %s\n", p);
+ goto out_with_einval;
}
target->ch_count = token;
break;
@@ -3601,7 +3629,7 @@ static int srp_parse_options(struct net *net, const char *buf,
default:
pr_warn("unknown parameter or missing value '%s' in target creation request\n",
p);
- goto out;
+ goto out_with_einval;
}
}
@@ -3620,6 +3648,8 @@ static int srp_parse_options(struct net *net, const char *buf,
target->scsi_host->cmd_per_lun,
target->scsi_host->can_queue);
+out_with_einval:
+ ret = -EINVAL;
out:
kfree(options);
return ret;
--
1.8.3.1
next prev parent reply other threads:[~2022-11-26 3:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-26 3:35 [PATCH v2 1/2] RDMA/hfi1: Fix error return code in parse_platform_config() Wang Yufen
2022-11-26 3:35 ` Wang Yufen [this message]
2022-11-26 12:02 ` [PATCH v2 2/2] RDMA/srp: Fix error return code in srp_parse_options() Andy Shevchenko
2022-11-26 12:03 ` Andy Shevchenko
2022-11-26 13:19 ` wangyufen
2022-11-26 13:19 ` wangyufen
2022-11-26 12:04 ` [PATCH v2 1/2] RDMA/hfi1: Fix error return code in parse_platform_config() Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1669433704-2254-2-git-send-email-wangyufen@huawei.com \
--to=wangyufen@huawei.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bart.vanassche@wdc.com \
--cc=bvanassche@acm.org \
--cc=dennis.dalessandro@cornelisnetworks.com \
--cc=easwar.hariharan@intel.com \
--cc=jgg@ziepe.ca \
--cc=leon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox