Linux RDMA and InfiniBand development
 help / color / mirror / Atom feed
From: Selvin Xavier <selvin.xavier@broadcom.com>
To: jgg@ziepe.ca, leon@kernel.org
Cc: linux-rdma@vger.kernel.org, andrew.gospodarek@broadcom.com,
	Kashyap Desai <kashyap.desai@broadcom.com>,
	Selvin Xavier <selvin.xavier@broadcom.com>
Subject: [PATCH for-next 17/17] RDMA/bnxt_re: optimize the parameters passed to helper functions
Date: Thu,  8 Jun 2023 03:25:08 -0700	[thread overview]
Message-ID: <1686219908-11181-18-git-send-email-selvin.xavier@broadcom.com> (raw)
In-Reply-To: <1686219908-11181-1-git-send-email-selvin.xavier@broadcom.com>

[-- Attachment #1: Type: text/plain, Size: 7465 bytes --]

From: Kashyap Desai <kashyap.desai@broadcom.com>

Avoid passing arguments like Opcode which can be retrieved from
bnxt_qplib_crsqe structure.

Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
---
 drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 44 +++++++++++++-----------------
 1 file changed, 19 insertions(+), 25 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
index 45bbf5f..3526518 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
@@ -93,9 +93,6 @@ static int bnxt_qplib_map_rc(u8 opcode)
  * bnxt_re_is_fw_stalled   -	Check firmware health
  * @rcfw      -   rcfw channel instance of rdev
  * @cookie    -   cookie to track the command
- * @opcode    -   rcfw submitted for given opcode
- * @cbit      -   bitmap entry of cookie
- * @in_used   -   command is in used or freed
  *
  * If firmware has not responded any rcfw command within
  * rcfw->max_timeout, consider firmware as stalled.
@@ -105,20 +102,22 @@ static int bnxt_qplib_map_rc(u8 opcode)
  * -ENODEV if firmware is not responding
  */
 static int bnxt_re_is_fw_stalled(struct bnxt_qplib_rcfw *rcfw,
-				 u16 cookie, u8 opcode, bool in_used)
+				 u16 cookie)
 {
 	struct bnxt_qplib_cmdq_ctx *cmdq;
+	struct bnxt_qplib_crsqe *crsqe;
 
+	crsqe = &rcfw->crsqe_tbl[cookie];
 	cmdq = &rcfw->cmdq;
 
 	if (time_after(jiffies, cmdq->last_seen +
 		      (rcfw->max_timeout * HZ))) {
 		dev_warn_ratelimited(&rcfw->pdev->dev,
 				     "%s: FW STALL Detected. cmdq[%#x]=%#x waited (%d > %d) msec active %d ",
-				     __func__, cookie, opcode,
+				     __func__, cookie, crsqe->opcode,
 				     jiffies_to_msecs(jiffies - cmdq->last_seen),
 				     rcfw->max_timeout * 1000,
-				     in_used);
+				     crsqe->is_in_used);
 		return -ENODEV;
 	}
 
@@ -129,7 +128,6 @@ static int bnxt_re_is_fw_stalled(struct bnxt_qplib_rcfw *rcfw,
  * __wait_for_resp   -	Don't hold the cpu context and wait for response
  * @rcfw      -   rcfw channel instance of rdev
  * @cookie    -   cookie to track the command
- * @opcode    -   rcfw submitted for given opcode
  *
  * Wait for command completion in sleepable context.
  *
@@ -137,7 +135,7 @@ static int bnxt_re_is_fw_stalled(struct bnxt_qplib_rcfw *rcfw,
  * 0 if command is completed by firmware.
  * Non zero error code for rest of the case.
  */
-static int __wait_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie, u8 opcode)
+static int __wait_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie)
 {
 	struct bnxt_qplib_cmdq_ctx *cmdq;
 	struct bnxt_qplib_crsqe *crsqe;
@@ -148,7 +146,7 @@ static int __wait_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie, u8 opcode)
 
 	do {
 		if (test_bit(ERR_DEVICE_DETACHED, &cmdq->flags))
-			return bnxt_qplib_map_rc(opcode);
+			return bnxt_qplib_map_rc(crsqe->opcode);
 		if (test_bit(FIRMWARE_STALL_DETECTED, &cmdq->flags))
 			return -ETIMEDOUT;
 
@@ -166,7 +164,7 @@ static int __wait_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie, u8 opcode)
 		if (!crsqe->is_in_used)
 			return 0;
 
-		ret = bnxt_re_is_fw_stalled(rcfw, cookie, opcode, crsqe->is_in_used);
+		ret = bnxt_re_is_fw_stalled(rcfw, cookie);
 		if (ret)
 			return ret;
 
@@ -177,7 +175,6 @@ static int __wait_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie, u8 opcode)
  * __block_for_resp   -	hold the cpu context and wait for response
  * @rcfw      -   rcfw channel instance of rdev
  * @cookie    -   cookie to track the command
- * @opcode    -   rcfw submitted for given opcode
  *
  * This function will hold the cpu (non-sleepable context) and
  * wait for command completion. Maximum holding interval is 8 second.
@@ -186,7 +183,7 @@ static int __wait_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie, u8 opcode)
  * -ETIMEOUT if command is not completed in specific time interval.
  * 0 if command is completed by firmware.
  */
-static int __block_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie, u8 opcode)
+static int __block_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie)
 {
 	struct bnxt_qplib_cmdq_ctx *cmdq = &rcfw->cmdq;
 	struct bnxt_qplib_crsqe *crsqe;
@@ -197,7 +194,7 @@ static int __block_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie, u8 opcode)
 
 	do {
 		if (test_bit(ERR_DEVICE_DETACHED, &cmdq->flags))
-			return bnxt_qplib_map_rc(opcode);
+			return bnxt_qplib_map_rc(crsqe->opcode);
 		if (test_bit(FIRMWARE_STALL_DETECTED, &cmdq->flags))
 			return -ETIMEDOUT;
 
@@ -375,7 +372,6 @@ static int __send_message(struct bnxt_qplib_rcfw *rcfw,
  * __poll_for_resp   -	self poll completion for rcfw command
  * @rcfw      -   rcfw channel instance of rdev
  * @cookie    -   cookie to track the command
- * @opcode    -   rcfw submitted for given opcode
  *
  * It works same as __wait_for_resp except this function will
  * do self polling in sort interval since interrupt is disabled.
@@ -385,8 +381,7 @@ static int __send_message(struct bnxt_qplib_rcfw *rcfw,
  * -ETIMEOUT if command is not completed in specific time interval.
  * 0 if command is completed by firmware.
  */
-static int __poll_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie,
-			   u8 opcode)
+static int __poll_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie)
 {
 	struct bnxt_qplib_cmdq_ctx *cmdq = &rcfw->cmdq;
 	struct bnxt_qplib_crsqe *crsqe;
@@ -398,7 +393,7 @@ static int __poll_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie,
 
 	do {
 		if (test_bit(ERR_DEVICE_DETACHED, &cmdq->flags))
-			return bnxt_qplib_map_rc(opcode);
+			return bnxt_qplib_map_rc(crsqe->opcode);
 		if (test_bit(FIRMWARE_STALL_DETECTED, &cmdq->flags))
 			return -ETIMEDOUT;
 
@@ -409,7 +404,7 @@ static int __poll_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie,
 			return 0;
 		if (jiffies_to_msecs(jiffies - issue_time) >
 		    (rcfw->max_timeout * 1000)) {
-			ret = bnxt_re_is_fw_stalled(rcfw, cookie, opcode, crsqe->is_in_used);
+			ret = bnxt_re_is_fw_stalled(rcfw, cookie);
 			if (ret)
 				return ret;
 		}
@@ -417,13 +412,12 @@ static int __poll_for_resp(struct bnxt_qplib_rcfw *rcfw, u16 cookie,
 };
 
 static int __send_message_basic_sanity(struct bnxt_qplib_rcfw *rcfw,
-				       struct bnxt_qplib_cmdqmsg *msg)
+				       struct bnxt_qplib_cmdqmsg *msg,
+				       u8 opcode)
 {
 	struct bnxt_qplib_cmdq_ctx *cmdq;
-	u32 opcode;
 
 	cmdq = &rcfw->cmdq;
-	opcode = __get_cmdq_base_opcode(msg->req, msg->req_sz);
 
 	/* Prevent posting if f/w is not in a state to process */
 	if (test_bit(ERR_DEVICE_DETACHED, &rcfw->cmdq.flags))
@@ -495,7 +489,7 @@ static int __bnxt_qplib_rcfw_send_message(struct bnxt_qplib_rcfw *rcfw,
 
 	opcode = __get_cmdq_base_opcode(msg->req, msg->req_sz);
 
-	rc = __send_message_basic_sanity(rcfw, msg);
+	rc = __send_message_basic_sanity(rcfw, msg, opcode);
 	if (rc)
 		return rc == -ENXIO ? bnxt_qplib_map_rc(opcode) : rc;
 
@@ -507,11 +501,11 @@ static int __bnxt_qplib_rcfw_send_message(struct bnxt_qplib_rcfw *rcfw,
 				& RCFW_MAX_COOKIE_VALUE;
 
 	if (msg->block)
-		rc = __block_for_resp(rcfw, cookie, opcode);
+		rc = __block_for_resp(rcfw, cookie);
 	else if (atomic_read(&rcfw->rcfw_intr_enabled))
-		rc = __wait_for_resp(rcfw, cookie, opcode);
+		rc = __wait_for_resp(rcfw, cookie);
 	else
-		rc = __poll_for_resp(rcfw, cookie, opcode);
+		rc = __poll_for_resp(rcfw, cookie);
 	if (rc) {
 		/* timed out */
 		dev_err(&rcfw->pdev->dev, "cmdq[%#x]=%#x timedout (%d)msec\n",
-- 
2.5.5


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4224 bytes --]

      parent reply	other threads:[~2023-06-08 10:38 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-08 10:24 [PATCH for-next 00/17] RDMA/bnxt_re: Control path updates Selvin Xavier
2023-06-08 10:24 ` [PATCH for-next 01/17] RDMA/bnxt_re: wraparound mbox producer index Selvin Xavier
2023-06-08 10:24 ` [PATCH for-next 02/17] RDMA/bnxt_re: Avoid calling wake_up threads from spin_lock context Selvin Xavier
2023-06-08 10:24 ` [PATCH for-next 03/17] RDMA/bnxt_re: remove virt_func check while creating RoCE FW channel Selvin Xavier
2023-06-08 10:24 ` [PATCH for-next 04/17] RDMA/bnxt_re: set fixed command queue depth Selvin Xavier
2023-06-08 10:24 ` [PATCH for-next 05/17] RDMA/bnxt_re: Enhance the existing functions that wait for FW responses Selvin Xavier
2023-06-08 10:24 ` [PATCH for-next 06/17] RDMA/bnxt_re: Avoid the command wait if firmware is inactive Selvin Xavier
2023-06-08 10:24 ` [PATCH for-next 07/17] RDMA/bnxt_re: use shadow qd while posting non blocking rcfw command Selvin Xavier
2023-06-08 10:24 ` [PATCH for-next 08/17] RDMA/bnxt_re: Simplify the function that sends the FW commands Selvin Xavier
2023-06-08 10:25 ` [PATCH for-next 09/17] RDMA/bnxt_re: add helper function __poll_for_resp Selvin Xavier
2023-06-08 10:25 ` [PATCH for-next 10/17] RDMA/bnxt_re: handle command completions after driver detect a timedout Selvin Xavier
2023-06-08 12:53   ` kernel test robot
2023-06-08 10:25 ` [PATCH for-next 11/17] RDMA/bnxt_re: Add firmware stall check detection Selvin Xavier
2023-06-08 10:25 ` [PATCH for-next 12/17] RDMA/bnxt_re: post destroy_ah for delayed completion of AH creation Selvin Xavier
2023-06-08 10:25 ` [PATCH for-next 13/17] RDMA/bnxt_re: consider timeout of destroy ah as success Selvin Xavier
2023-06-08 10:25 ` [PATCH for-next 14/17] RDMA/bnxt_re: cancel all control path command waiters upon error Selvin Xavier
2023-06-08 10:25 ` [PATCH for-next 15/17] RDMA/bnxt_re: use firmware provided max request timeout Selvin Xavier
2023-06-08 10:25 ` [PATCH for-next 16/17] RDMA/bnxt_re: remove redundant cmdq_bitmap Selvin Xavier
2023-06-08 10:25 ` Selvin Xavier [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1686219908-11181-18-git-send-email-selvin.xavier@broadcom.com \
    --to=selvin.xavier@broadcom.com \
    --cc=andrew.gospodarek@broadcom.com \
    --cc=jgg@ziepe.ca \
    --cc=kashyap.desai@broadcom.com \
    --cc=leon@kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox