[PATCH for-next 2/4] RDMA/bnxt_re: Use the aux device for L2 ULP callbacks

[Selvin Xavier <selvin.xavier@broadcom.com>]

From: Chandramohan Akula <chandramohan.akula@broadcom.com>

While registering with the L2 for ULP operations, use the
aux device pointer as the handle. Aux device has
the data bnxt_re_en_dev_info, which is used to
store required information for the bnxt_re_suspend
and bnxt_re_resume functions.

Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
---
 drivers/infiniband/hw/bnxt_re/main.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index 8679459..a5e0c21 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -305,11 +305,18 @@ static void bnxt_re_shutdown(struct auxiliary_device *adev)
 
 static void bnxt_re_stop_irq(void *handle)
 {
-	struct bnxt_re_dev *rdev = (struct bnxt_re_dev *)handle;
-	struct bnxt_qplib_rcfw *rcfw = &rdev->rcfw;
+	struct bnxt_re_en_dev_info *en_info = auxiliary_get_drvdata(handle);
+	struct bnxt_qplib_rcfw *rcfw;
+	struct bnxt_re_dev *rdev;
 	struct bnxt_qplib_nq *nq;
 	int indx;
 
+	if (!en_info)
+		return;
+
+	rdev = en_info->rdev;
+	rcfw = &rdev->rcfw;
+
 	for (indx = BNXT_RE_NQ_IDX; indx < rdev->num_msix; indx++) {
 		nq = &rdev->nq[indx - 1];
 		bnxt_qplib_nq_stop_irq(nq, false);
@@ -320,12 +327,19 @@ static void bnxt_re_stop_irq(void *handle)
 
 static void bnxt_re_start_irq(void *handle, struct bnxt_msix_entry *ent)
 {
-	struct bnxt_re_dev *rdev = (struct bnxt_re_dev *)handle;
-	struct bnxt_msix_entry *msix_ent = rdev->en_dev->msix_entries;
-	struct bnxt_qplib_rcfw *rcfw = &rdev->rcfw;
+	struct bnxt_re_en_dev_info *en_info = auxiliary_get_drvdata(handle);
+	struct bnxt_msix_entry *msix_ent;
+	struct bnxt_qplib_rcfw *rcfw;
+	struct bnxt_re_dev *rdev;
 	struct bnxt_qplib_nq *nq;
 	int indx, rc;
 
+	if (!en_info)
+		return;
+
+	rdev = en_info->rdev;
+	msix_ent = rdev->en_dev->msix_entries;
+	rcfw = &rdev->rcfw;
 	if (!ent) {
 		/* Not setting the f/w timeout bit in rcfw.
 		 * During the driver unload the first command
@@ -374,7 +388,7 @@ static int bnxt_re_register_netdev(struct bnxt_re_dev *rdev)
 
 	en_dev = rdev->en_dev;
 
-	rc = bnxt_register_dev(en_dev, &bnxt_re_ulp_ops, rdev);
+	rc = bnxt_register_dev(en_dev, &bnxt_re_ulp_ops, rdev->adev);
 	if (!rc)
 		rdev->qplib_res.pdev = rdev->en_dev->pdev;
 	return rc;
-- 
2.5.5