[PATCH AUTOSEL 5.0 006/317] IB/hfi1: Fix WQ_MEM_RECLAIM warning

[PATCH AUTOSEL 5.0 006/317] IB/hfi1: Fix WQ_MEM_RECLAIM warning

[Sasha Levin]

From: Mike Marciniszyn <mike.marciniszyn@intel.com>

[ Upstream commit 4c4b1996b5db688e2dcb8242b0a3bf7b1e845e42 ]

The work_item cancels that occur when a QP is destroyed can elicit the
following trace:

 workqueue: WQ_MEM_RECLAIM ipoib_wq:ipoib_cm_tx_reap [ib_ipoib] is flushing !WQ_MEM_RECLAIM hfi0_0:_hfi1_do_send [hfi1]
 WARNING: CPU: 7 PID: 1403 at kernel/workqueue.c:2486 check_flush_dependency+0xb1/0x100
 Call Trace:
  __flush_work.isra.29+0x8c/0x1a0
  ? __switch_to_asm+0x40/0x70
  __cancel_work_timer+0x103/0x190
  ? schedule+0x32/0x80
  iowait_cancel_work+0x15/0x30 [hfi1]
  rvt_reset_qp+0x1f8/0x3e0 [rdmavt]
  rvt_destroy_qp+0x65/0x1f0 [rdmavt]
  ? _cond_resched+0x15/0x30
  ib_destroy_qp+0xe9/0x230 [ib_core]
  ipoib_cm_tx_reap+0x21c/0x560 [ib_ipoib]
  process_one_work+0x171/0x370
  worker_thread+0x49/0x3f0
  kthread+0xf8/0x130
  ? max_active_store+0x80/0x80
  ? kthread_bind+0x10/0x10
  ret_from_fork+0x35/0x40

Since QP destruction frees memory, hfi1_wq should have the WQ_MEM_RECLAIM.

The hfi1_wq does not allocate memory with GFP_KERNEL or otherwise become
entangled with memory reclaim, so this flag is appropriate.

Fixes: 0a226edd203f ("staging/rdma/hfi1: Use parallel workqueue for SDMA engines")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c
index c532ceb0bb9af..b66c4fe8151a1 100644
--- a/drivers/infiniband/hw/hfi1/init.c
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -797,7 +797,8 @@ static int create_workqueues(struct hfi1_devdata *dd)
 			ppd->hfi1_wq =
 				alloc_workqueue(
 				    "hfi%d_%d",
-				    WQ_SYSFS | WQ_HIGHPRI | WQ_CPU_INTENSIVE,
+				    WQ_SYSFS | WQ_HIGHPRI | WQ_CPU_INTENSIVE |
+				    WQ_MEM_RECLAIM,
 				    HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES,
 				    dd->unit, pidx);
 			if (!ppd->hfi1_wq)
-- 
2.20.1

[PATCH AUTOSEL 5.0 088/317] RDMA/cma: Consider scope_id while binding to ipv6 ll address

[Sasha Levin]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit 5d7ed2f27bbd482fd29e6b2e204b1a1ee8a0b268 ]

When two netdev have same link local addresses (such as vlan and non
vlan), two rdma cm listen id should be able to bind to following different
addresses.

listener-1: addr=lla, scope_id=A, port=X
listener-2: addr=lla, scope_id=B, port=X

However while comparing the addresses only addr and port are considered,
due to which 2nd listener fails to listen.

In below example of two listeners, 2nd listener is failing with address in
use error.

$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1 -p 4545&

$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1.200 -p 4545
rdma_bind_addr: Address already in use

To overcome this, consider the scope_ids as well which forms the accurate
IPv6 link local address.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cma.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 81bded0d37d1e..cb482f3389504 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -1170,18 +1170,31 @@ static inline bool cma_any_addr(const struct sockaddr *addr)
 	return cma_zero_addr(addr) || cma_loopback_addr(addr);
 }
 
-static int cma_addr_cmp(struct sockaddr *src, struct sockaddr *dst)
+static int cma_addr_cmp(const struct sockaddr *src, const struct sockaddr *dst)
 {
 	if (src->sa_family != dst->sa_family)
 		return -1;
 
 	switch (src->sa_family) {
 	case AF_INET:
-		return ((struct sockaddr_in *) src)->sin_addr.s_addr !=
-		       ((struct sockaddr_in *) dst)->sin_addr.s_addr;
-	case AF_INET6:
-		return ipv6_addr_cmp(&((struct sockaddr_in6 *) src)->sin6_addr,
-				     &((struct sockaddr_in6 *) dst)->sin6_addr);
+		return ((struct sockaddr_in *)src)->sin_addr.s_addr !=
+		       ((struct sockaddr_in *)dst)->sin_addr.s_addr;
+	case AF_INET6: {
+		struct sockaddr_in6 *src_addr6 = (struct sockaddr_in6 *)src;
+		struct sockaddr_in6 *dst_addr6 = (struct sockaddr_in6 *)dst;
+		bool link_local;
+
+		if (ipv6_addr_cmp(&src_addr6->sin6_addr,
+					  &dst_addr6->sin6_addr))
+			return 1;
+		link_local = ipv6_addr_type(&dst_addr6->sin6_addr) &
+			     IPV6_ADDR_LINKLOCAL;
+		/* Link local must match their scope_ids */
+		return link_local ? (src_addr6->sin6_scope_id !=
+				     dst_addr6->sin6_scope_id) :
+				    0;
+	}
+
 	default:
 		return ib_addr_cmp(&((struct sockaddr_ib *) src)->sib_addr,
 				   &((struct sockaddr_ib *) dst)->sib_addr);
-- 
2.20.1