* [PATCH net-next v1 1/9] selftests: rds: Capitalize ret global in test.py
2026-05-11 7:23 [PATCH net-next v1 0/9] selftests: rds: Add ROCE support to rds selftests Allison Henderson
@ 2026-05-11 7:23 ` Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 2/9] selftests: rds: Add helper function setup_tcp() " Allison Henderson
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Allison Henderson @ 2026-05-11 7:23 UTC (permalink / raw)
To: netdev, pabeni, edumazet, kuba, horms, linux-rdma, achender,
linux-kselftest, shuah
Global variables outside of functions should be capitalized to avoid
pylint complaints. Fix this before refactoring to avoid complaints
later.
Signed-off-by: Allison Henderson <achender@kernel.org>
---
tools/testing/selftests/net/rds/test.py | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/tools/testing/selftests/net/rds/test.py b/tools/testing/selftests/net/rds/test.py
index 6db606779231..d78c00226e7b 100755
--- a/tools/testing/selftests/net/rds/test.py
+++ b/tools/testing/selftests/net/rds/test.py
@@ -291,29 +291,29 @@ stop_pcaps()
# We're done sending and receiving stuff, now let's check if what
# we received is what we sent.
-ret = 0
+RC = 0
for (sender, receiver), send_hash in send_hashes.items():
recv_hash = recv_hashes.get((sender, receiver))
if recv_hash is None:
ksft_pr("FAIL: No data received")
- ret = 1
+ RC = 1
break
if send_hash.hexdigest() != recv_hash.hexdigest():
ksft_pr("FAIL: Send/recv mismatch")
ksft_pr("hash expected:", send_hash.hexdigest())
ksft_pr("hash received:", recv_hash.hexdigest())
- ret = 1
+ RC = 1
break
ksft_pr(f"{sender}/{receiver}: ok")
-if ret == 0:
+if RC == 0:
ksft_pr("Success")
print("ok 1 rds selftest")
else:
print("not ok 1 rds selftest")
-ksft_pr(f"Totals: pass:{1-ret} fail:{ret} skip:0")
-sys.exit(ret)
+ksft_pr(f"Totals: pass:{1-RC} fail:{RC} skip:0")
+sys.exit(RC)
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH net-next v1 2/9] selftests: rds: Add helper function setup_tcp() in test.py
2026-05-11 7:23 [PATCH net-next v1 0/9] selftests: rds: Add ROCE support to rds selftests Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 1/9] selftests: rds: Capitalize ret global in test.py Allison Henderson
@ 2026-05-11 7:23 ` Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 3/9] selftests: rds: Add helper function check_info() " Allison Henderson
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Allison Henderson @ 2026-05-11 7:23 UTC (permalink / raw)
To: netdev, pabeni, edumazet, kuba, horms, linux-rdma, achender,
linux-kselftest, shuah
Hoist the network configs in test.py into a tcp specific helper
function, setup_tcp(). This is a preparatory refactoring for the
rds over ROCE series which will add separate function for rdma
specific configs. No functional changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
---
tools/testing/selftests/net/rds/test.py | 113 +++++++++++++-----------
1 file changed, 60 insertions(+), 53 deletions(-)
diff --git a/tools/testing/selftests/net/rds/test.py b/tools/testing/selftests/net/rds/test.py
index d78c00226e7b..027131b26287 100755
--- a/tools/testing/selftests/net/rds/test.py
+++ b/tools/testing/selftests/net/rds/test.py
@@ -32,6 +32,15 @@ NET1 = 'net1'
VETH0 = 'veth0'
VETH1 = 'veth1'
+tcpdump_procs = []
+tcp_addrs = [
+ # we technically don't need different port numbers, but this will
+ # help identify traffic in the network analyzer
+ ('10.0.0.1', 10000),
+ ('10.0.0.2', 20000),
+]
+
+
# Helper function for creating a socket inside a network namespace.
# We need this because otherwise RDS will detect that the two TCP
# sockets are on the same interface and use the loop transport instead
@@ -100,6 +109,55 @@ def signal_handler(_sig, _frame):
print("not ok 1 rds selftest")
sys.exit(1)
+def setup_tcp():
+ """
+ Configure tcp network
+ """
+
+ ip(f"netns add {NET0}")
+ ip(f"netns add {NET1}")
+ ip("link add type veth")
+
+ # Move TCP interfaces into separate namespaces so they can no longer be
+ # bound directly; this prevents rds from switching over from the tcp
+ # transport to the loop transport.
+ ip(f"link set {VETH0} netns {NET0} up")
+ ip(f"link set {VETH1} netns {NET1} up")
+
+ # add addresses
+ ip(f"-n {NET0} addr add {tcp_addrs[0][0]}/32 dev {VETH0}")
+ ip(f"-n {NET1} addr add {tcp_addrs[1][0]}/32 dev {VETH1}")
+
+ # add routes
+ ip(f"-n {NET0} route add {tcp_addrs[1][0]}/32 dev {VETH0}")
+ ip(f"-n {NET1} route add {tcp_addrs[0][0]}/32 dev {VETH1}")
+
+ # sanity check that our two interfaces/addresses are correctly set up
+ # and communicating by doing a single ping
+ ip(f"netns exec {NET0} ping -c 1 {tcp_addrs[1][0]}")
+
+ # Start a packet capture on each network
+ if logdir is not None:
+ for netn in [NET0, NET1]:
+ pcap = logdir+'/rds-'+netn+'.pcap'
+
+ tcpdump_cmd = ['ip', 'netns', 'exec', netn, '/usr/sbin/tcpdump']
+ sudo_user = os.environ.get('SUDO_USER')
+ if sudo_user:
+ tcpdump_cmd.extend(['-Z', sudo_user])
+ tcpdump_cmd.extend(['-i', 'any', '-w', pcap])
+
+ # pylint: disable-next=consider-using-with
+ p = subprocess.Popen(tcpdump_cmd,
+ stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
+ tcpdump_procs.append(p)
+
+ # simulate packet loss, duplication and corruption
+ for netn, iface in [(NET0, VETH0), (NET1, VETH1)]:
+ ip(f"netns exec {netn} /usr/sbin/tc qdisc add dev {iface} root netem \
+ corrupt {PACKET_CORRUPTION} loss {PACKET_LOSS} duplicate \
+ {PACKET_DUPLICATE}")
+
#Parse out command line arguments. We take an optional
# timeout parameter and an optional log output folder
parser = argparse.ArgumentParser(description="init script args",
@@ -120,59 +178,8 @@ PACKET_LOSS=str(args.loss)+'%'
PACKET_CORRUPTION=str(args.corruption)+'%'
PACKET_DUPLICATE=str(args.duplicate)+'%'
-ip(f"netns add {NET0}")
-ip(f"netns add {NET1}")
-ip("link add type veth")
-
-addrs = [
- # we technically don't need different port numbers, but this will
- # help identify traffic in the network analyzer
- ('10.0.0.1', 10000),
- ('10.0.0.2', 20000),
-]
-
-# move interfaces to separate namespaces so they can no longer be
-# bound directly; this prevents rds from switching over from the tcp
-# transport to the loop transport.
-ip(f"link set {VETH0} netns {NET0} up")
-ip(f"link set {VETH1} netns {NET1} up")
-
-
-
-# add addresses
-ip(f"-n {NET0} addr add {addrs[0][0]}/32 dev {VETH0}")
-ip(f"-n {NET1} addr add {addrs[1][0]}/32 dev {VETH1}")
-
-# add routes
-ip(f"-n {NET0} route add {addrs[1][0]}/32 dev {VETH0}")
-ip(f"-n {NET1} route add {addrs[0][0]}/32 dev {VETH1}")
-
-# sanity check that our two interfaces/addresses are correctly set up
-# and communicating by doing a single ping
-ip(f"netns exec {NET0} ping -c 1 {addrs[1][0]}")
-
-tcpdump_procs = []
-# Start a packet capture on each network
-if logdir is not None:
- for net in [NET0, NET1]:
- pcap = logdir+'/rds-'+net+'.pcap'
-
- tcpdump_cmd = ['ip', 'netns', 'exec', net, '/usr/sbin/tcpdump']
- sudo_user = os.environ.get('SUDO_USER')
- if sudo_user:
- tcpdump_cmd.extend(['-Z', sudo_user])
- tcpdump_cmd.extend(['-i', 'any', '-w', pcap])
-
- # pylint: disable-next=consider-using-with
- p = subprocess.Popen(tcpdump_cmd,
- stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
- tcpdump_procs.append(p)
-
-# simulate packet loss, duplication and corruption
-for net, iface in [(NET0, VETH0), (NET1, VETH1)]:
- ip(f"netns exec {net} /usr/sbin/tc qdisc add dev {iface} root netem \
- corrupt {PACKET_CORRUPTION} loss {PACKET_LOSS} duplicate \
- {PACKET_DUPLICATE}")
+setup_tcp()
+addrs = tcp_addrs
print("TAP version 13")
print("1..1")
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH net-next v1 3/9] selftests: rds: Add helper function check_info() in test.py
2026-05-11 7:23 [PATCH net-next v1 0/9] selftests: rds: Add ROCE support to rds selftests Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 1/9] selftests: rds: Capitalize ret global in test.py Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 2/9] selftests: rds: Add helper function setup_tcp() " Allison Henderson
@ 2026-05-11 7:23 ` Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 4/9] selftests: rds: Add helper function send_burst() " Allison Henderson
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Allison Henderson @ 2026-05-11 7:23 UTC (permalink / raw)
To: netdev, pabeni, edumazet, kuba, horms, linux-rdma, achender,
linux-kselftest, shuah
Hoist the page info logic in test.py into a helper function,
check_info(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
---
tools/testing/selftests/net/rds/test.py | 53 +++++++++++++++----------
1 file changed, 31 insertions(+), 22 deletions(-)
diff --git a/tools/testing/selftests/net/rds/test.py b/tools/testing/selftests/net/rds/test.py
index 027131b26287..5d4b039580df 100755
--- a/tools/testing/selftests/net/rds/test.py
+++ b/tools/testing/selftests/net/rds/test.py
@@ -79,6 +79,36 @@ def netns_socket(netns, *sock_args):
u1.close()
return socket.fromfd(fds[0], *sock_args)
+def check_info(socks):
+ """
+ Check all rds info pages for errors
+
+ :param socks: list of sockets to check
+ """
+
+ # the Python socket module doesn't know these
+ rds_info_first = 10000
+ rds_info_last = 10017
+
+ nr_success = 0
+ nr_error = 0
+
+ for sock in socks:
+ for optname in range(rds_info_first, rds_info_last + 1):
+ # Sigh, the Python socket module doesn't allow us to pass
+ # buffer lengths greater than 1024 for some reason. RDS
+ # wants multiple pages.
+ try:
+ sock.getsockopt(socket.SOL_RDS, optname, 1024)
+ nr_success = nr_success + 1
+ except OSError as e:
+ nr_error = nr_error + 1
+ if e.errno == errno.ENOSPC:
+ # ignore
+ pass
+
+ ksft_pr(f"getsockopt(): {nr_success}/{nr_error}")
+
def stop_pcaps():
"""Stop tcpdump processes.
@@ -268,28 +298,7 @@ while nr_send < NUM_PACKETS:
ksft_pr("done", nr_send, nr_recv)
-# the Python socket module doesn't know these
-RDS_INFO_FIRST = 10000
-RDS_INFO_LAST = 10017
-
-nr_success = 0
-nr_error = 0
-
-for s in sockets:
- for optname in range(RDS_INFO_FIRST, RDS_INFO_LAST + 1):
- # Sigh, the Python socket module doesn't allow us to pass
- # buffer lengths greater than 1024 for some reason. RDS
- # wants multiple pages.
- try:
- s.getsockopt(socket.SOL_RDS, optname, 1024)
- nr_success = nr_success + 1
- except OSError as e:
- nr_error = nr_error + 1
- if e.errno == errno.ENOSPC:
- # ignore
- pass
-
-ksft_pr(f"getsockopt(): {nr_success}/{nr_error}")
+check_info(sockets)
# cancel timeout
signal.alarm(0)
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH net-next v1 4/9] selftests: rds: Add helper function send_burst() in test.py
2026-05-11 7:23 [PATCH net-next v1 0/9] selftests: rds: Add ROCE support to rds selftests Allison Henderson
` (2 preceding siblings ...)
2026-05-11 7:23 ` [PATCH net-next v1 3/9] selftests: rds: Add helper function check_info() " Allison Henderson
@ 2026-05-11 7:23 ` Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 5/9] selftests: rds: Add helper function recv_burst() " Allison Henderson
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Allison Henderson @ 2026-05-11 7:23 UTC (permalink / raw)
To: netdev, pabeni, edumazet, kuba, horms, linux-rdma, achender,
linux-kselftest, shuah
Hoist the send packet logic in test.py into a helper function,
send_burst(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
---
tools/testing/selftests/net/rds/test.py | 50 +++++++++++++------------
1 file changed, 27 insertions(+), 23 deletions(-)
diff --git a/tools/testing/selftests/net/rds/test.py b/tools/testing/selftests/net/rds/test.py
index 5d4b039580df..d34e1af7887e 100755
--- a/tools/testing/selftests/net/rds/test.py
+++ b/tools/testing/selftests/net/rds/test.py
@@ -79,6 +79,31 @@ def netns_socket(netns, *sock_args):
u1.close()
return socket.fromfd(fds[0], *sock_args)
+def send_burst(socks, ip_addrs, snd_hashes, nr_sent, nr_total):
+ """Send until blocked or nr_total reached. Return updated nr_sent."""
+
+ while nr_sent < nr_total:
+ data = hashlib.sha256(
+ f'packet {nr_sent}'.encode('utf-8')).hexdigest().encode('utf-8')
+ # pseudo-random send/receive pattern
+ snd_idx = nr_sent % 2
+ rcv_idx = 1 - (nr_sent % 3) % 2
+
+ snd = socks[snd_idx]
+ rcv = socks[rcv_idx]
+ try:
+ snd.sendto(data, ip_addrs[rcv_idx])
+ except BlockingIOError:
+ return nr_sent
+ except OSError as e:
+ if e.errno in (errno.ENOBUFS, errno.ECONNRESET, errno.EPIPE):
+ return nr_sent
+ raise
+ snd_hashes.setdefault((snd.fileno(), rcv.fileno()),
+ hashlib.sha256()).update(f'<{data}>'.encode('utf-8'))
+ nr_sent += 1
+ return nr_sent
+
def check_info(socks):
"""
Check all rds info pages for errors
@@ -234,10 +259,6 @@ fileno_to_socket = {
addr_to_socket = dict(zip(addrs, sockets))
-socket_to_addr = {
- s: addr for addr, s in zip(addrs, sockets)
-}
-
send_hashes = {}
recv_hashes = {}
@@ -251,27 +272,10 @@ nr_send = 0
nr_recv = 0
while nr_send < NUM_PACKETS:
+
# Send as much as we can without blocking
ksft_pr("sending...", nr_send, nr_recv)
- while nr_send < NUM_PACKETS:
- send_data = hashlib.sha256(
- f'packet {nr_send}'.encode('utf-8')).hexdigest().encode('utf-8')
-
- # pseudo-random send/receive pattern
- sender = sockets[nr_send % 2]
- receiver = sockets[1 - (nr_send % 3) % 2]
-
- try:
- sender.sendto(send_data, socket_to_addr[receiver])
- send_hashes.setdefault((sender.fileno(), receiver.fileno()),
- hashlib.sha256()).update(f'<{send_data}>'.encode('utf-8'))
- nr_send = nr_send + 1
- except BlockingIOError:
- break
- except OSError as e:
- if e.errno in [errno.ENOBUFS, errno.ECONNRESET, errno.EPIPE]:
- break
- raise
+ nr_send = send_burst(sockets, addrs, send_hashes, nr_send, NUM_PACKETS)
# Receive as much as we can without blocking
ksft_pr("receiving...", nr_send, nr_recv)
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH net-next v1 5/9] selftests: rds: Add helper function recv_burst() in test.py
2026-05-11 7:23 [PATCH net-next v1 0/9] selftests: rds: Add ROCE support to rds selftests Allison Henderson
` (3 preceding siblings ...)
2026-05-11 7:23 ` [PATCH net-next v1 4/9] selftests: rds: Add helper function send_burst() " Allison Henderson
@ 2026-05-11 7:23 ` Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 6/9] selftests: rds: Add helper function verify_hashes() " Allison Henderson
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Allison Henderson @ 2026-05-11 7:23 UTC (permalink / raw)
To: netdev, pabeni, edumazet, kuba, horms, linux-rdma, achender,
linux-kselftest, shuah
Hoist receive packet logic in test.py into a helper function,
recv_burst(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
---
tools/testing/selftests/net/rds/test.py | 39 ++++++++++++-------------
1 file changed, 19 insertions(+), 20 deletions(-)
diff --git a/tools/testing/selftests/net/rds/test.py b/tools/testing/selftests/net/rds/test.py
index d34e1af7887e..2e06e95827dd 100755
--- a/tools/testing/selftests/net/rds/test.py
+++ b/tools/testing/selftests/net/rds/test.py
@@ -104,6 +104,24 @@ def send_burst(socks, ip_addrs, snd_hashes, nr_sent, nr_total):
nr_sent += 1
return nr_sent
+def recv_burst(epoll, socks, ip_addrs, rcv_hashes, nr_rcv):
+ """Drain whatever's readable from epoll. Return updated nr_recv."""
+ for filen, evntmask in epoll.poll():
+ if not evntmask & select.EPOLLRDNORM:
+ continue
+ rcv = next(s for s in socks if s.fileno() == filen)
+ while True:
+ try:
+ data, adr = rcv.recvfrom(1024)
+ except BlockingIOError:
+ break
+ snd_idx = ip_addrs.index(adr);
+ snd = socks[snd_idx]
+ rcv_hashes.setdefault((snd.fileno(), rcv.fileno()),
+ hashlib.sha256()).update(f'<{data}>'.encode('utf-8'))
+ nr_rcv += 1
+ return nr_rcv
+
def check_info(socks):
"""
Check all rds info pages for errors
@@ -253,12 +271,6 @@ for s, addr in zip(sockets, addrs):
s.bind(addr)
s.setblocking(0)
-fileno_to_socket = {
- s.fileno(): s for s in sockets
-}
-
-addr_to_socket = dict(zip(addrs, sockets))
-
send_hashes = {}
recv_hashes = {}
@@ -280,20 +292,7 @@ while nr_send < NUM_PACKETS:
# Receive as much as we can without blocking
ksft_pr("receiving...", nr_send, nr_recv)
while nr_recv < nr_send:
- for fileno, eventmask in ep.poll():
- receiver = fileno_to_socket[fileno]
-
- if eventmask & select.EPOLLRDNORM:
- while True:
- try:
- recv_data, address = receiver.recvfrom(1024)
- sender = addr_to_socket[address]
- recv_hashes.setdefault((sender.fileno(),
- receiver.fileno()), hashlib.sha256()).update(
- f'<{recv_data}>'.encode('utf-8'))
- nr_recv = nr_recv + 1
- except BlockingIOError:
- break
+ nr_recv = recv_burst(ep, sockets, addrs, recv_hashes, nr_recv)
# exercise net/rds/tcp.c:rds_tcp_sysctl_reset()
for net in [NET0, NET1]:
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH net-next v1 6/9] selftests: rds: Add helper function verify_hashes() in test.py
2026-05-11 7:23 [PATCH net-next v1 0/9] selftests: rds: Add ROCE support to rds selftests Allison Henderson
` (4 preceding siblings ...)
2026-05-11 7:23 ` [PATCH net-next v1 5/9] selftests: rds: Add helper function recv_burst() " Allison Henderson
@ 2026-05-11 7:23 ` Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 7/9] selftests: rds: Add helper function snd_rcv_packets() " Allison Henderson
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Allison Henderson @ 2026-05-11 7:23 UTC (permalink / raw)
To: netdev, pabeni, edumazet, kuba, horms, linux-rdma, achender,
linux-kselftest, shuah
Hoist the verify hashes logic in test.py into a helper function,
verify_hashes(). This is a preparatory refactoring for the rds over
ROCE series that helps modularize the send/recv logic. Breaking up the
logic now will help avoid large function pylint errors later. No
functional changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
---
tools/testing/selftests/net/rds/test.py | 33 ++++++++++++-------------
1 file changed, 16 insertions(+), 17 deletions(-)
diff --git a/tools/testing/selftests/net/rds/test.py b/tools/testing/selftests/net/rds/test.py
index 2e06e95827dd..6a7a5fe20034 100755
--- a/tools/testing/selftests/net/rds/test.py
+++ b/tools/testing/selftests/net/rds/test.py
@@ -152,6 +152,21 @@ def check_info(socks):
ksft_pr(f"getsockopt(): {nr_success}/{nr_error}")
+def verify_hashes(snd_hashes, rcv_hashes):
+ """Compare send/recv hashes per (sender, receiver) pair."""
+ for key, snd_hash in snd_hashes.items():
+ rcv_hash = rcv_hashes.get(key)
+ if rcv_hash is None:
+ ksft_pr("FAIL: No data received")
+ return 1
+ if snd_hash.hexdigest() != rcv_hash.hexdigest():
+ ksft_pr("FAIL: Send/recv mismatch")
+ ksft_pr("hash expected:", snd_hash.hexdigest())
+ ksft_pr("hash received:", rcv_hash.hexdigest())
+ return 1
+ ksft_pr(f"{key[0]}/{key[1]}: ok")
+ return 0
+
def stop_pcaps():
"""Stop tcpdump processes.
@@ -310,23 +325,7 @@ stop_pcaps()
# We're done sending and receiving stuff, now let's check if what
# we received is what we sent.
-RC = 0
-for (sender, receiver), send_hash in send_hashes.items():
- recv_hash = recv_hashes.get((sender, receiver))
-
- if recv_hash is None:
- ksft_pr("FAIL: No data received")
- RC = 1
- break
-
- if send_hash.hexdigest() != recv_hash.hexdigest():
- ksft_pr("FAIL: Send/recv mismatch")
- ksft_pr("hash expected:", send_hash.hexdigest())
- ksft_pr("hash received:", recv_hash.hexdigest())
- RC = 1
- break
-
- ksft_pr(f"{sender}/{receiver}: ok")
+RC = verify_hashes(send_hashes, recv_hashes)
if RC == 0:
ksft_pr("Success")
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH net-next v1 7/9] selftests: rds: Add helper function snd_rcv_packets() in test.py
2026-05-11 7:23 [PATCH net-next v1 0/9] selftests: rds: Add ROCE support to rds selftests Allison Henderson
` (5 preceding siblings ...)
2026-05-11 7:23 ` [PATCH net-next v1 6/9] selftests: rds: Add helper function verify_hashes() " Allison Henderson
@ 2026-05-11 7:23 ` Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 8/9] selftests: rds: Add ROCE support to test.py Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 9/9] selftests: rds: Add ROCE support to run.sh Allison Henderson
8 siblings, 0 replies; 10+ messages in thread
From: Allison Henderson @ 2026-05-11 7:23 UTC (permalink / raw)
To: netdev, pabeni, edumazet, kuba, horms, linux-rdma, achender,
linux-kselftest, shuah
Hoist the send/recv logic in test.py into a helper function,
snd_rcv_packets(). This is a preparatory refactoring for the
rds over ROCE series which can use the same function to run
the test over tcp, rdma, or both. No functional changes are
introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
---
tools/testing/selftests/net/rds/test.py | 99 ++++++++++++++-----------
1 file changed, 54 insertions(+), 45 deletions(-)
diff --git a/tools/testing/selftests/net/rds/test.py b/tools/testing/selftests/net/rds/test.py
index 6a7a5fe20034..38f6100a6e33 100755
--- a/tools/testing/selftests/net/rds/test.py
+++ b/tools/testing/selftests/net/rds/test.py
@@ -167,6 +167,59 @@ def verify_hashes(snd_hashes, rcv_hashes):
ksft_pr(f"{key[0]}/{key[1]}: ok")
return 0
+def snd_rcv_packets(addrs, netns_list):
+ """
+ Send packets on the given network interfaces
+
+ :param addrs: list of (ip, port) tuples matching the sockets
+ :param netns_list: list of network namespaces
+ """
+
+ sockets = [
+ netns_socket(netns_list[0], socket.AF_RDS, socket.SOCK_SEQPACKET),
+ netns_socket(netns_list[1], socket.AF_RDS, socket.SOCK_SEQPACKET),
+ ]
+
+ for s, addr in zip(sockets, addrs):
+ s.bind(addr)
+ s.setblocking(0)
+
+ send_hashes = {}
+ recv_hashes = {}
+
+ ep = select.epoll()
+
+ for s in sockets:
+ ep.register(s, select.EPOLLRDNORM)
+
+ NUM_PACKETS = 50000
+ nr_send = 0
+ nr_recv = 0
+
+ while nr_send < NUM_PACKETS:
+
+ # Send as much as we can without blocking
+ ksft_pr("sending...", nr_send, nr_recv)
+ nr_send = send_burst(sockets, addrs, send_hashes, nr_send, NUM_PACKETS)
+
+ # Receive as much as we can without blocking
+ ksft_pr("receiving...", nr_send, nr_recv)
+ while nr_recv < nr_send:
+ nr_recv = recv_burst(ep, sockets, addrs, recv_hashes, nr_recv)
+
+ # exercise net/rds/tcp.c:rds_tcp_sysctl_reset()
+ for net in netns_list:
+ ip(f"netns exec {net} /usr/sbin/sysctl net.rds.tcp.rds_tcp_rcvbuf=10000")
+ ip(f"netns exec {net} /usr/sbin/sysctl net.rds.tcp.rds_tcp_sndbuf=10000")
+
+ ksft_pr("done", nr_send, nr_recv)
+
+ check_info(sockets)
+
+ # We're done sending and receiving stuff, now let's check if what
+ # we received is what we sent.
+ return verify_hashes(send_hashes, recv_hashes)
+
def stop_pcaps():
"""Stop tcpdump processes.
@@ -267,7 +320,6 @@ PACKET_CORRUPTION=str(args.corruption)+'%'
PACKET_DUPLICATE=str(args.duplicate)+'%'
setup_tcp()
-addrs = tcp_addrs
print("TAP version 13")
print("1..1")
@@ -277,56 +329,13 @@ if args.timeout > 0:
signal.alarm(args.timeout)
signal.signal(signal.SIGALRM, signal_handler)
-sockets = [
- netns_socket(NET0, socket.AF_RDS, socket.SOCK_SEQPACKET),
- netns_socket(NET1, socket.AF_RDS, socket.SOCK_SEQPACKET),
-]
-
-for s, addr in zip(sockets, addrs):
- s.bind(addr)
- s.setblocking(0)
-
-send_hashes = {}
-recv_hashes = {}
-
-ep = select.epoll()
-
-for s in sockets:
- ep.register(s, select.EPOLLRDNORM)
-
-NUM_PACKETS = 50000
-nr_send = 0
-nr_recv = 0
-
-while nr_send < NUM_PACKETS:
-
- # Send as much as we can without blocking
- ksft_pr("sending...", nr_send, nr_recv)
- nr_send = send_burst(sockets, addrs, send_hashes, nr_send, NUM_PACKETS)
-
- # Receive as much as we can without blocking
- ksft_pr("receiving...", nr_send, nr_recv)
- while nr_recv < nr_send:
- nr_recv = recv_burst(ep, sockets, addrs, recv_hashes, nr_recv)
-
- # exercise net/rds/tcp.c:rds_tcp_sysctl_reset()
- for net in [NET0, NET1]:
- ip(f"netns exec {net} /usr/sbin/sysctl net.rds.tcp.rds_tcp_rcvbuf=10000")
- ip(f"netns exec {net} /usr/sbin/sysctl net.rds.tcp.rds_tcp_sndbuf=10000")
-
-ksft_pr("done", nr_send, nr_recv)
-
-check_info(sockets)
+RC = snd_rcv_packets(tcp_addrs, [NET0, NET1])
# cancel timeout
signal.alarm(0)
stop_pcaps()
-# We're done sending and receiving stuff, now let's check if what
-# we received is what we sent.
-RC = verify_hashes(send_hashes, recv_hashes)
-
if RC == 0:
ksft_pr("Success")
print("ok 1 rds selftest")
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH net-next v1 8/9] selftests: rds: Add ROCE support to test.py
2026-05-11 7:23 [PATCH net-next v1 0/9] selftests: rds: Add ROCE support to rds selftests Allison Henderson
` (6 preceding siblings ...)
2026-05-11 7:23 ` [PATCH net-next v1 7/9] selftests: rds: Add helper function snd_rcv_packets() " Allison Henderson
@ 2026-05-11 7:23 ` Allison Henderson
2026-05-11 7:23 ` [PATCH net-next v1 9/9] selftests: rds: Add ROCE support to run.sh Allison Henderson
8 siblings, 0 replies; 10+ messages in thread
From: Allison Henderson @ 2026-05-11 7:23 UTC (permalink / raw)
To: netdev, pabeni, edumazet, kuba, horms, linux-rdma, achender,
linux-kselftest, shuah
This patch adds support for testing rds rdma over ROCE in test.py
A new -T flag is added, which takes a transport option, tcp or rdma.
A new setup_rdma() function is added that will configure rdma
interfaces and sockets for use in the test case.
Signed-off-by: Allison Henderson <achender@kernel.org>
---
tools/testing/selftests/net/rds/test.py | 196 ++++++++++++++++++++----
1 file changed, 169 insertions(+), 27 deletions(-)
diff --git a/tools/testing/selftests/net/rds/test.py b/tools/testing/selftests/net/rds/test.py
index 38f6100a6e33..9ec9a206fe93 100755
--- a/tools/testing/selftests/net/rds/test.py
+++ b/tools/testing/selftests/net/rds/test.py
@@ -10,16 +10,18 @@ import errno
import hashlib
import os
import select
+import re
import signal
import socket
import subprocess
import sys
+import time
# Allow utils module to be imported from different directory
this_dir = os.path.dirname(os.path.realpath(__file__))
sys.path.append(os.path.join(this_dir, "../"))
# pylint: disable-next=wrong-import-position,import-error,no-name-in-module
-from lib.py.utils import ip # noqa: E402
+from lib.py.utils import ip, cmd # noqa: E402
# pylint: disable-next=wrong-import-position,import-error,no-name-in-module
from lib.py.ksft import ksft_pr # noqa: E402
@@ -40,6 +42,23 @@ tcp_addrs = [
('10.0.0.2', 20000),
]
+# RDMA network configs
+RXE_DEV0 = 'rxe0'
+RXE_DEV1 = 'rxe1'
+
+VETH_RDMA0 = 'veth_rdma0'
+VETH_RDMA1 = 'veth_rdma1'
+
+rdma_addrs = [
+ ('10.0.0.3', 30000),
+ ('10.0.0.4', 30000),
+]
+
+# send_packets flag space
+OP_FLAG_TCP = 0x1
+OP_FLAG_RDMA = 0x2
+
+signal_handler_label = ""
# Helper function for creating a socket inside a network namespace.
# We need this because otherwise RDS will detect that the two TCP
@@ -167,7 +186,7 @@ def verify_hashes(snd_hashes, rcv_hashes):
ksft_pr(f"{key[0]}/{key[1]}: ok")
return 0
-def snd_rcv_packets(addrs, netns_list):
+def snd_rcv_packets(env):
"""
Send packets on the given network interfaces
@@ -175,10 +194,25 @@ def snd_rcv_packets(addrs, netns_list):
:param netns_list: list of network namespaces
"""
- sockets = [
- netns_socket(netns_list[0], socket.AF_RDS, socket.SOCK_SEQPACKET),
- netns_socket(netns_list[1], socket.AF_RDS, socket.SOCK_SEQPACKET),
- ]
+ addrs = env["addrs"]
+ netns_list = env["netns"]
+ flags = env.get("flags", 0)
+
+ if (flags & OP_FLAG_TCP) and (flags & OP_FLAG_RDMA):
+ raise RuntimeError(f"Invalid transport flag sets multiple transports: {flags}")
+
+ if flags & OP_FLAG_TCP:
+ sockets = [
+ netns_socket(netns_list[0], socket.AF_RDS, socket.SOCK_SEQPACKET),
+ netns_socket(netns_list[1], socket.AF_RDS, socket.SOCK_SEQPACKET),
+ ]
+ elif flags & OP_FLAG_RDMA:
+ sockets = [
+ socket.socket(socket.AF_RDS, socket.SOCK_SEQPACKET),
+ socket.socket(socket.AF_RDS, socket.SOCK_SEQPACKET),
+ ]
+ else:
+ raise RuntimeError(f"Invalid transport flag sets no transports: {flags}")
for s, addr in zip(sockets, addrs):
s.bind(addr)
@@ -208,9 +242,10 @@ def snd_rcv_packets(addrs, netns_list):
nr_recv = recv_burst(ep, sockets, addrs, recv_hashes, nr_recv)
# exercise net/rds/tcp.c:rds_tcp_sysctl_reset()
- for net in netns_list:
- ip(f"netns exec {net} /usr/sbin/sysctl net.rds.tcp.rds_tcp_rcvbuf=10000")
- ip(f"netns exec {net} /usr/sbin/sysctl net.rds.tcp.rds_tcp_sndbuf=10000")
+ if netns_list:
+ for net in netns_list:
+ ip(f"netns exec {net} /usr/sbin/sysctl net.rds.tcp.rds_tcp_rcvbuf=10000")
+ ip(f"netns exec {net} /usr/sbin/sysctl net.rds.tcp.rds_tcp_sndbuf=10000")
ksft_pr("done", nr_send, nr_recv)
@@ -245,9 +280,9 @@ def signal_handler(_sig, _frame):
"""
Test timed out signal handler
"""
- ksft_pr("Test timed out")
+ ksft_pr(f"Test timed out: {signal_handler_label}")
stop_pcaps()
- print("not ok 1 rds selftest")
+ print("not ok 1 rds selftest "+signal_handler_label)
sys.exit(1)
def setup_tcp():
@@ -299,12 +334,93 @@ def setup_tcp():
corrupt {PACKET_CORRUPTION} loss {PACKET_LOSS} duplicate \
{PACKET_DUPLICATE}")
+def get_iface_mac(iface):
+ """Return the MAC address of a local network interface."""
+ out = subprocess.check_output(['ip', 'link', 'show', iface], text=True)
+ mac = re.search(r'link/ether\s+([0-9a-f:]+)', out)
+ if not mac:
+ raise RuntimeError(f"Cannot determine MAC address of {iface}")
+ return mac.group(1)
+
+def setup_rdma():
+ # remove links left over by previously interrupted run.
+ cmd(f'rdma link del {RXE_DEV0}', fail=False)
+ cmd(f'rdma link del {RXE_DEV1}', fail=False)
+ cmd(f'ip link del {VETH_RDMA0}', fail=False)
+
+ # use call here since modprobe may fail if the rdma_rxe
+ # module is built-in
+ subprocess.call(['modprobe', 'rdma_rxe'],
+ stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
+
+ ip(f"link add {VETH_RDMA0} type veth peer name {VETH_RDMA1}")
+
+ ip(f"link set {VETH_RDMA0} up")
+ ip(f"link set {VETH_RDMA1} up")
+
+ # Since both addresses are in the same namespace, the source address
+ # is always local, so enable accept_local
+ cmd(f"/usr/sbin/sysctl -q net.ipv4.conf.{VETH_RDMA0}.accept_local=1")
+ cmd(f"/usr/sbin/sysctl -q net.ipv4.conf.{VETH_RDMA1}.accept_local=1")
+
+ # Reverse path filters must be disabled so that the local routes don't
+ # cause RPF failures.
+ cmd(f"/usr/sbin/sysctl -q net.ipv4.conf.{VETH_RDMA0}.rp_filter=0")
+ cmd(f"/usr/sbin/sysctl -q net.ipv4.conf.{VETH_RDMA1}.rp_filter=0")
+
+ # add addresses
+ ip(f"addr add {rdma_addrs[0][0]}/32 dev {VETH_RDMA0}")
+ ip(f"addr add {rdma_addrs[1][0]}/32 dev {VETH_RDMA1}")
+
+ # add routes
+ ip(f"route add {rdma_addrs[1][0]}/32 dev {VETH_RDMA0}")
+ ip(f"route add {rdma_addrs[0][0]}/32 dev {VETH_RDMA1}")
+
+ # ARP will not resolve neighbor IPs on /32 routes without a subnet.
+ # Avoid this by adding neighbors directly so RDMA CM can populate path
+ # records with correct mac addrs without waiting for the ARP.
+ mac0 = get_iface_mac(VETH_RDMA0)
+ mac1 = get_iface_mac(VETH_RDMA1)
+ ip(f"neigh add {rdma_addrs[1][0]} lladdr {mac1} dev {VETH_RDMA0} nud permanent")
+ ip(f"neigh add {rdma_addrs[0][0]} lladdr {mac0} dev {VETH_RDMA1} nud permanent")
+
+ cmd(f'rdma link add {RXE_DEV0} type rxe netdev {VETH_RDMA0}')
+ cmd(f'rdma link add {RXE_DEV1} type rxe netdev {VETH_RDMA1}')
+
+ time.sleep(1) # allow RXE devices to initialise
+
+ # Start a packet capture on each network
+ if logdir is not None:
+ pcap = logdir+'/rds-'+'roce.pcap'
+
+ tcpdump_cmd = ['/usr/sbin/tcpdump']
+ sudo_user = os.environ.get('SUDO_USER')
+ if sudo_user:
+ tcpdump_cmd.extend(['-Z', sudo_user])
+ tcpdump_cmd.extend(['-i', 'any', '-w', pcap])
+
+ # pylint: disable-next=consider-using-with
+ p = subprocess.Popen(tcpdump_cmd,
+ stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
+ tcpdump_procs.append(p)
+
+ # simulate packet loss, duplication and corruption
+ for iface in [VETH_RDMA0, VETH_RDMA1]:
+ cmd(f"/usr/sbin/tc qdisc add dev {iface} root netem \
+ corrupt {PACKET_CORRUPTION} loss {PACKET_LOSS} duplicate \
+ {PACKET_DUPLICATE}")
+
#Parse out command line arguments. We take an optional
# timeout parameter and an optional log output folder
parser = argparse.ArgumentParser(description="init script args",
formatter_class=argparse.ArgumentDefaultsHelpFormatter)
parser.add_argument("-d", "--logdir", action="store",
help="directory to store logs", default=None)
+parser.add_argument("-T", "--transport", default="tcp",
+ help="Comma-separated list of transports to test: "
+ "tcp, rdma, or tcp,rdma. Each matching test "
+ "is run once per transport. "
+ "'rdma' requires CONFIG_RDS_RDMA and rdma_rxe.")
parser.add_argument('-t', '--timeout', help="timeout to terminate hung test",
type=int, default=0)
parser.add_argument('-l', '--loss', help="Simulate tcp packet loss",
@@ -319,28 +435,54 @@ PACKET_LOSS=str(args.loss)+'%'
PACKET_CORRUPTION=str(args.corruption)+'%'
PACKET_DUPLICATE=str(args.duplicate)+'%'
-setup_tcp()
+# check transport is either tcp or rdma
+transports = [t.strip() for t in args.transport.split(',')]
+for t in transports:
+ if t not in ('tcp', 'rdma'):
+ raise SystemExit(f"test.py: unknown transport: {t!r}")
print("TAP version 13")
print("1..1")
-# add a timeout
-if args.timeout > 0:
- signal.alarm(args.timeout)
- signal.signal(signal.SIGALRM, signal_handler)
-
-RC = snd_rcv_packets(tcp_addrs, [NET0, NET1])
-
-# cancel timeout
-signal.alarm(0)
+# Set up all requested transports upfront so network plumbing is
+# ready before any test runs.
+transport_envs = {}
+flags = 0
+if 'tcp' in transports:
+ setup_tcp()
+ transport_envs['tcp'] = {
+ 'addrs': tcp_addrs,
+ 'netns': [NET0, NET1],
+ 'flags': flags | OP_FLAG_TCP,
+ }
+
+if 'rdma' in transports:
+ setup_rdma()
+ transport_envs['rdma'] = {
+ 'addrs': rdma_addrs,
+ 'netns': None,
+ 'flags': flags | OP_FLAG_RDMA,
+ }
+
+for transport, env in transport_envs.items():
+ # add a timeout
+ if args.timeout > 0:
+ signal_handler_label = transport
+ signal.alarm(args.timeout)
+ signal.signal(signal.SIGALRM, signal_handler)
+
+ RC = snd_rcv_packets(env)
+
+ # cancel timeout
+ signal.alarm(0)
+
+ if RC == 0:
+ ksft_pr("Success")
+ print("ok 1 rds selftest "+transport)
+ else:
+ print("not ok 1 rds selftest "+transport)
stop_pcaps()
-if RC == 0:
- ksft_pr("Success")
- print("ok 1 rds selftest")
-else:
- print("not ok 1 rds selftest")
-
ksft_pr(f"Totals: pass:{1-RC} fail:{RC} skip:0")
sys.exit(RC)
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH net-next v1 9/9] selftests: rds: Add ROCE support to run.sh
2026-05-11 7:23 [PATCH net-next v1 0/9] selftests: rds: Add ROCE support to rds selftests Allison Henderson
` (7 preceding siblings ...)
2026-05-11 7:23 ` [PATCH net-next v1 8/9] selftests: rds: Add ROCE support to test.py Allison Henderson
@ 2026-05-11 7:23 ` Allison Henderson
8 siblings, 0 replies; 10+ messages in thread
From: Allison Henderson @ 2026-05-11 7:23 UTC (permalink / raw)
To: netdev, pabeni, edumazet, kuba, horms, linux-rdma, achender,
linux-kselftest, shuah
This patch adds support for testing rds rdma over ROCE. A new
-r flag is added to config.sh which enables the required kernel
configs for rdma. We also add a -T flag to run.sh, which takes
a transport option, tcp or rdma. The rdma option will check to
ensure the proper configs have been enabled. The flag is then
passed to test.py, which will run the test over the specified
transport(s)
Signed-off-by: Allison Henderson <achender@kernel.org>
---
tools/testing/selftests/net/rds/config.sh | 15 ++++++-
tools/testing/selftests/net/rds/run.sh | 51 ++++++++++++++++++++++-
2 files changed, 62 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/rds/config.sh b/tools/testing/selftests/net/rds/config.sh
index 29a79314dd60..be0668359a07 100755
--- a/tools/testing/selftests/net/rds/config.sh
+++ b/tools/testing/selftests/net/rds/config.sh
@@ -10,7 +10,8 @@ CONF_FILE=""
FLAGS=()
GENERATE_GCOV_REPORT=0
-while getopts "gc:" opt; do
+ENABLE_RDMA=0
+while getopts "gc:r" opt; do
case ${opt} in
g)
GENERATE_GCOV_REPORT=1
@@ -18,8 +19,11 @@ while getopts "gc:" opt; do
c)
CONF_FILE=$OPTARG
;;
+ r)
+ ENABLE_RDMA=1
+ ;;
:)
- echo "USAGE: config.sh [-g] [-c config]"
+ echo "USAGE: config.sh [-g] [-c config] [-r]"
exit 1
;;
?)
@@ -58,3 +62,10 @@ scripts/config "${FLAGS[@]}" --enable CONFIG_VETH
# simulate packet loss
scripts/config "${FLAGS[@]}" --enable CONFIG_NET_SCH_NETEM
+if [ "$ENABLE_RDMA" -eq 1 ]; then
+ # enable RDS over InfiniBand / RDMA (rds_rdma test)
+ scripts/config "${FLAGS[@]}" --enable CONFIG_INFINIBAND
+ scripts/config "${FLAGS[@]}" --enable CONFIG_INFINIBAND_ADDR_TRANS
+ scripts/config "${FLAGS[@]}" --enable CONFIG_RDMA_RXE
+ scripts/config "${FLAGS[@]}" --enable CONFIG_RDS_RDMA
+fi
diff --git a/tools/testing/selftests/net/rds/run.sh b/tools/testing/selftests/net/rds/run.sh
index 424fd57401d8..3b69218014d9 100755
--- a/tools/testing/selftests/net/rds/run.sh
+++ b/tools/testing/selftests/net/rds/run.sh
@@ -101,6 +101,15 @@ check_conf_enabled() {
exit 4
fi
}
+
+check_rdma_conf_enabled() {
+ if ! grep -x "$1=y" "$kconfig" > /dev/null 2>&1; then
+ echo "selftests: [SKIP] rdma transport requires $1 enabled"
+ echo "To enable, run tools/testing/selftests/net/rds/config.sh -r and rebuild"
+ exit 4
+ fi
+}
+
check_conf_disabled() {
if grep -x "$1=y" "$kconfig" > /dev/null 2>&1; then
echo "selftests: [SKIP] This test requires $1 disabled"
@@ -117,6 +126,27 @@ check_conf() {
check_conf_disabled CONFIG_MODULES
}
+# Check kernel config and host environment for RDS-RDMA support.
+# Exits with SKIP (4) if the user requested rdma but prerequisites
+# are not met.
+check_rdma_conf()
+{
+ case "$TRANSPORT" in
+ *rdma*) ;;
+ *) return ;;
+ esac
+
+ # Kconfig will enforce CONFIG_INFINIBAND_* as dependencies
+ # of CONFIG_RDMA_RXE
+ check_rdma_conf_enabled CONFIG_RDMA_RXE
+ check_rdma_conf_enabled CONFIG_RDS_RDMA
+
+ if ! which rdma > /dev/null 2>&1; then
+ echo "selftests: [SKIP] rdma transport requires the 'rdma' tool (iproute2)"
+ exit 4
+ fi
+}
+
check_env()
{
if ! test -d "$obj_dir"; then
@@ -153,8 +183,10 @@ check_env()
LOG_DIR="${RDS_LOG_DIR:-}"
TIMEOUT=$timeout
GENERATE_GCOV_REPORT=1
+TRANSPORT=tcp
FLAGS=()
-while getopts "d:l:c:u:t:" opt; do
+
+while getopts "d:l:c:u:t:T:" opt; do
case ${opt} in
d)
LOG_DIR=${OPTARG}
@@ -171,9 +203,12 @@ while getopts "d:l:c:u:t:" opt; do
u)
FLAGS+=("-u" "${OPTARG}")
;;
+ T)
+ TRANSPORT=${OPTARG}
+ ;;
:)
echo "USAGE: run.sh [-d logdir] [-l packet_loss] [-c packet_corruption]" \
- "[-u packet_duplicate] [-t timeout]"
+ "[-u packet_duplicate] [-t timeout] [-T tcp[,rdma]]"
exit 1
;;
?)
@@ -183,9 +218,21 @@ while getopts "d:l:c:u:t:" opt; do
esac
done
+# Validate transport tokens
+IFS=',' read -ra transports <<< "$TRANSPORT"
+for t in "${transports[@]}"; do
+ if [ "$t" != "tcp" ] && [ "$t" != "rdma" ]; then
+ echo "run.sh: unknown transport '$t' (expected tcp or rdma)"
+ exit 1
+ fi
+done
+
+FLAGS+=("--transport" "${TRANSPORT}")
+
check_env
check_conf
check_gcov_conf
+check_rdma_conf
TRACE_CMD=()
if [[ -n "$LOG_DIR" ]]; then
--
2.25.1
^ permalink raw reply related [flat|nested] 10+ messages in thread