Linux RDMA and InfiniBand development
 help / color / mirror / Atom feed
From: Long Li <longli@microsoft.com>
To: Long Li <longli@microsoft.com>,
	Konstantin Taranov <kotaranov@microsoft.com>,
	Jakub Kicinski <kuba@kernel.org>,
	"David S . Miller" <davem@davemloft.net>,
	Paolo Abeni <pabeni@redhat.com>,
	Eric Dumazet <edumazet@google.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	Jason Gunthorpe <jgg@ziepe.ca>, Leon Romanovsky <leon@kernel.org>,
	Haiyang Zhang <haiyangz@microsoft.com>,
	"K . Y . Srinivasan" <kys@microsoft.com>,
	Wei Liu <wei.liu@kernel.org>, Dexuan Cui <decui@microsoft.com>,
	shradhagupta@linux.microsoft.com, Simon Horman <horms@kernel.org>,
	ernis@linux.microsoft.com, stephen@networkplumber.org,
	shirazsaleem@microsoft.com
Cc: netdev@vger.kernel.org, linux-rdma@vger.kernel.org,
	linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v3 06/13] net: mana: swap queue sets in mana_change_mtu
Date: Mon, 31 Aug 2026 18:44:35 -0700	[thread overview]
Message-ID: <20260901014442.2945689-7-longli@microsoft.com> (raw)
In-Reply-To: <20260901014442.2945689-1-longli@microsoft.com>

The RX buffer layout depends on the MTU, so changing it rebuilds the
queues. Convert mana_change_mtu() to pre-allocate and swap.

The MTU becomes part of the queue-set configuration, so a new set can be
built for the new MTU while the running one still serves traffic at the
old one, and ndev->mtu is updated only once the new set is live.
Previously it was written before mana_attach() and rolled back on
failure, so a failed change was briefly visible to the stack.

Signed-off-by: Long Li <longli@microsoft.com>
---
 drivers/net/ethernet/microsoft/mana/mana_en.c | 69 ++++++++++++++-----
 .../ethernet/microsoft/mana/mana_ethtool.c    | 10 +--
 include/net/mana/mana.h                       | 12 +++-
 3 files changed, 67 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/microsoft/mana/mana_en.c b/drivers/net/ethernet/microsoft/mana/mana_en.c
index 880a3ba37fd3e872dbfeb101c46ac8f527c4bbdd..2c5aa5e5d1a114e1492b99b5213bb532153d1147 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_en.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_en.c
@@ -917,35 +917,49 @@ int mana_pre_alloc_rxbufs(struct mana_port_context *mpc, int new_mtu, int num_qu
 	return -ENOMEM;
 }
 
+/* ndev->mtu is updated only once the new set is live (mana_publish_qset), so
+ * a failed allocation leaves the queues and the advertised MTU untouched.
+ */
 static int mana_change_mtu(struct net_device *ndev, int new_mtu)
 {
 	struct mana_port_context *mpc = netdev_priv(ndev);
-	unsigned int old_mtu = ndev->mtu;
+	struct mana_port_context *scratch;
+	struct mana_qset newq, oldq;
 	int err;
 
-	/* Pre-allocate buffers to prevent failure in mana_attach later */
-	err = mana_pre_alloc_rxbufs(mpc, new_mtu, mpc->num_queues);
-	if (err) {
-		netdev_err(ndev, "Insufficient memory for new MTU\n");
-		return err;
+	/* Port is down: no queues to rebuild, just record the new MTU.
+	 * mana_open() will size the RX buffers accordingly.
+	 */
+	if (!mpc->port_is_up) {
+		mpc->configured_mtu = new_mtu;
+		WRITE_ONCE(ndev->mtu, new_mtu);
+		return 0;
 	}
 
-	err = mana_detach(ndev, false);
-	if (err) {
-		netdev_err(ndev, "mana_detach failed: %d\n", err);
-		goto out;
-	}
+	scratch = mana_qset_scratch_alloc(mpc);
+	if (!scratch)
+		return -ENOMEM;
 
-	WRITE_ONCE(ndev->mtu, new_mtu);
+	err = mana_alloc_qset(mpc, scratch, mpc->num_queues,
+			      mpc->rx_queue_size, mpc->tx_queue_size,
+			      mpc->priv_flags, new_mtu, &newq);
+	if (err)
+		goto free_scratch; /* current qset and ndev->mtu untouched */
 
-	err = mana_attach(ndev);
+	err = mana_publish_qset(mpc, &newq, &oldq);
 	if (err) {
-		netdev_err(ndev, "mana_attach failed: %d\n", err);
-		WRITE_ONCE(ndev->mtu, old_mtu);
+		mana_free_qset(scratch, &newq);
+		goto free_scratch;
 	}
 
-out:
-	mana_pre_dealloc_rxbufs(mpc);
+	mana_free_qset(scratch, &oldq);
+
+free_scratch:
+	/* After the caller-side cleanup above, so the EQ pool outlives the
+	 * CQs that reference it.
+	 */
+	mana_publish_close_if_needed(mpc);
+	mana_qset_scratch_free(scratch);
 	return err;
 }
 
@@ -3195,7 +3209,8 @@ static struct mana_rxq *mana_create_rxq(struct mana_port_context *apc,
 	rxq->rxq_idx = rxq_idx;
 	rxq->rxobj = INVALID_MANA_HANDLE;
 
-	mana_get_rxbuf_cfg(apc, ndev->mtu, &rxq->datasize, &rxq->alloc_size,
+	mana_get_rxbuf_cfg(apc, apc->configured_mtu, &rxq->datasize,
+			   &rxq->alloc_size,
 			   &rxq->headroom, &rxq->frag_count);
 	/* Create page pool for RX queue */
 	err = mana_create_page_pool(rxq, gc);
@@ -4006,6 +4021,7 @@ static void mana_qset_snapshot(const struct mana_port_context *ctx,
 	out->rx_queue_size	= ctx->rx_queue_size;
 	out->tx_queue_size	= ctx->tx_queue_size;
 	out->priv_flags		= ctx->priv_flags;
+	out->mtu		= ctx->configured_mtu;
 }
 
 /* Install @qset's fields onto @ctx. The vport (port_handle,
@@ -4025,6 +4041,7 @@ static void mana_qset_install(struct mana_port_context *ctx,
 	ctx->rx_queue_size	= qset->rx_queue_size;
 	ctx->tx_queue_size	= qset->tx_queue_size;
 	ctx->priv_flags		= qset->priv_flags;
+	ctx->configured_mtu	= qset->mtu;
 }
 
 /**
@@ -4083,7 +4100,7 @@ void mana_qset_scratch_free(struct mana_port_context *scratch)
 int mana_alloc_qset(struct mana_port_context *apc,
 		    struct mana_port_context *scratch, unsigned int num_queues,
 		    unsigned int rx_queue_size, unsigned int tx_queue_size,
-		    u32 priv_flags, struct mana_qset *out)
+		    u32 priv_flags, int mtu, struct mana_qset *out)
 {
 	struct net_device *ndev = scratch->ndev;
 	int err;
@@ -4095,6 +4112,12 @@ int mana_alloc_qset(struct mana_port_context *apc,
 	scratch->tx_queue_size	= tx_queue_size;
 	scratch->priv_flags	= priv_flags;
 
+	/* mana_get_rxbuf_cfg() reads this when sizing RX buffers, so the
+	 * new set is built for the requested MTU without disturbing the
+	 * running set.
+	 */
+	scratch->configured_mtu	= mtu;
+
 	err = mana_init_port_context(scratch);
 	if (err)
 		goto out_err;
@@ -4335,6 +4358,11 @@ int mana_publish_qset(struct mana_port_context *apc, struct mana_qset *newq,
 	if (err)
 		goto rollback;
 
+	/* The new set is serving traffic, so advertise its MTU. A no-op unless
+	 * the caller is changing it.
+	 */
+	WRITE_ONCE(ndev->mtu, apc->configured_mtu);
+
 	/* Pair with the queue-state stores above: a datapath reader that sees
 	 * the gate open must also see the queue set it is about to index.
 	 */
@@ -4389,6 +4417,8 @@ int mana_publish_qset(struct mana_port_context *apc, struct mana_qset *newq,
 		return err;
 	}
 
+	WRITE_ONCE(ndev->mtu, apc->configured_mtu);
+
 	/* Same pairing as the success path: the restored queue set has to be
 	 * visible before the gate reopens on it.
 	 */
@@ -4600,6 +4630,7 @@ static int mana_probe_port(struct mana_context *ac, int port_idx,
 	apc->port_handle = INVALID_MANA_HANDLE;
 	apc->pf_filter_handle = INVALID_MANA_HANDLE;
 	apc->port_idx = port_idx;
+	apc->configured_mtu = ndev->mtu;
 	apc->link_cfg_error = 1;
 	apc->cqe_coalescing_enable = 0;
 	apc->cqe8_coalescing_enable = 0;
diff --git a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
index eab7df3fb888b3e0cc2e0657965da2ba4190ecd8..d01add523576f97bea7c02dfdab1073cb24cbca1 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
@@ -722,7 +722,8 @@ static int mana_set_channels(struct net_device *ndev,
 	}
 
 	err = mana_alloc_qset(apc, scratch, new_count, apc->rx_queue_size,
-			      apc->tx_queue_size, apc->priv_flags, &newq);
+			      apc->tx_queue_size, apc->priv_flags,
+			      apc->configured_mtu, &newq);
 	if (err)
 		goto free_scratch; /* current qset untouched, nothing to undo */
 
@@ -816,7 +817,7 @@ static int mana_set_ringparam(struct net_device *ndev,
 	}
 
 	err = mana_alloc_qset(apc, scratch, apc->num_queues, new_rx, new_tx,
-			      apc->priv_flags, &newq);
+			      apc->priv_flags, apc->configured_mtu, &newq);
 	if (err) {
 		NL_SET_ERR_MSG_FMT(extack, "failed to change ring params: %d",
 				   err);
@@ -913,8 +914,9 @@ static int mana_set_priv_flags(struct net_device *ndev, u32 priv_flags)
 		goto clear_flag;
 	}
 
-	err = mana_alloc_qset(apc, scratch, apc->num_queues, apc->rx_queue_size,
-			      apc->tx_queue_size, priv_flags, &newq);
+	err = mana_alloc_qset(apc, scratch, apc->num_queues,
+			      apc->rx_queue_size, apc->tx_queue_size,
+			      priv_flags, apc->configured_mtu, &newq);
 	if (err)
 		goto free_scratch; /* current qset and priv_flags untouched */
 
diff --git a/include/net/mana/mana.h b/include/net/mana/mana.h
index dd767ab623912a149b4445cea7453034c8d69e37..765eb5358e9ca2b9977096631db9aab37cedacfd 100644
--- a/include/net/mana/mana.h
+++ b/include/net/mana/mana.h
@@ -626,6 +626,11 @@ struct mana_port_context {
 	unsigned int rx_queue_size;
 	unsigned int tx_queue_size;
 
+	/* MTU the RX queues were built for. Equal to ndev->mtu except during a
+	 * swap, when the new set is built before ndev->mtu is updated.
+	 */
+	int configured_mtu;
+
 	mana_handle_t port_handle;
 	mana_handle_t pf_filter_handle;
 
@@ -717,6 +722,11 @@ struct mana_qset {
 	unsigned int		tx_queue_size;
 	u32			priv_flags;
 
+	/* MTU the RX buffers of this set were sized for. It feeds
+	 * mana_get_rxbuf_cfg(), so it is part of the queue-set
+	 * configuration and must be swapped atomically with the queues.
+	 */
+	int			mtu;
 };
 
 netdev_tx_t mana_start_xmit(struct sk_buff *skb, struct net_device *ndev);
@@ -738,7 +748,7 @@ void mana_qset_scratch_free(struct mana_port_context *scratch);
 int mana_alloc_qset(struct mana_port_context *apc,
 		    struct mana_port_context *scratch, unsigned int num_queues,
 		    unsigned int rx_queue_size, unsigned int tx_queue_size,
-		    u32 priv_flags, struct mana_qset *out);
+		    u32 priv_flags, int mtu, struct mana_qset *out);
 int mana_publish_qset(struct mana_port_context *apc, struct mana_qset *newq,
 		      struct mana_qset *out_old);
 void mana_publish_close_if_needed(struct mana_port_context *apc);
-- 
2.43.0


  parent reply	other threads:[~2026-09-01  1:45 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-01  1:44 [PATCH net-next v3 00/13] net: mana: reconfigure by replacing the queue set Long Li
2026-09-01  1:44 ` [PATCH net-next v3 01/13] net: mana: add queue-set allocation and teardown helpers Long Li
2026-09-04  4:46   ` netdev-bot+sashiko
2026-09-01  1:44 ` [PATCH net-next v3 02/13] net: mana: share the EQ pool across a queue-set swap Long Li
2026-09-04  4:46   ` netdev-bot+sashiko
2026-09-01  1:44 ` [PATCH net-next v3 03/13] net: mana: swap queue sets in mana_set_channels Long Li
2026-09-04  4:46   ` netdev-bot+sashiko
2026-09-01  1:44 ` [PATCH net-next v3 04/13] net: mana: swap queue sets in mana_set_ringparam Long Li
2026-09-04  4:46   ` netdev-bot+sashiko
2026-09-01  1:44 ` [PATCH net-next v3 05/13] net: mana: swap queue sets in mana_set_priv_flags Long Li
2026-09-04  4:46   ` netdev-bot+sashiko
2026-09-01  1:44 ` Long Li [this message]
2026-09-04  4:46   ` [PATCH net-next v3 06/13] net: mana: swap queue sets in mana_change_mtu netdev-bot+sashiko
2026-09-01  1:44 ` [PATCH net-next v3 07/13] net: mana: swap queue sets in mana_xdp_set Long Li
2026-09-04  4:46   ` netdev-bot+sashiko
2026-09-01  1:44 ` [PATCH net-next v3 08/13] net: mana: do not bail out of mana_detach on dealloc failure Long Li
2026-09-04  4:46   ` netdev-bot+sashiko
2026-09-01  1:44 ` [PATCH net-next v3 09/13] net: mana: keep per-queue statistics in the port context Long Li
2026-09-04  4:46   ` netdev-bot+sashiko
2026-09-01  1:44 ` [PATCH net-next v3 10/13] net: mana: release EQs left idle by a channel-count reduction Long Li
2026-09-04  4:46   ` netdev-bot+sashiko
2026-09-01  1:44 ` [PATCH net-next v3 11/13] net: mana: keep a user-configured RSS table across a queue rebuild Long Li
2026-09-04  4:46   ` netdev-bot+sashiko
2026-09-01  1:44 ` [PATCH net-next v3 12/13] net: mana: keep the surviving queues when the channel count is reduced Long Li
2026-09-04  4:46   ` netdev-bot+sashiko
2026-09-01  1:44 ` [PATCH net-next v3 13/13] net: mana: keep the existing queues when the channel count is raised Long Li
2026-09-04  4:46   ` netdev-bot+sashiko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260901014442.2945689-7-longli@microsoft.com \
    --to=longli@microsoft.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=decui@microsoft.com \
    --cc=edumazet@google.com \
    --cc=ernis@linux.microsoft.com \
    --cc=haiyangz@microsoft.com \
    --cc=horms@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=kotaranov@microsoft.com \
    --cc=kuba@kernel.org \
    --cc=kys@microsoft.com \
    --cc=leon@kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=shirazsaleem@microsoft.com \
    --cc=shradhagupta@linux.microsoft.com \
    --cc=stephen@networkplumber.org \
    --cc=wei.liu@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox