Re: [PATCH v2 for-next 05/11] RDMA/hns: WARN_ON if get a reserved sl from users

[liweihang <liweihang@huawei.com>]

On 2020/12/10 5:09, Jason Gunthorpe wrote:
> On Fri, Dec 04, 2020 at 06:40:30PM +0800, Weihang Li wrote:
>> According to the RoCE v1 specification, the sl (service level) 0-7 are
>> mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
>> driver should verify whether the value of sl is larger than 7, if so, an
>> exception should be returned.
>>
>> Fixes: 172505cfa3a8 ("RDMA/hns: Add check for the validity of sl configuration")
>> Fixes: d6a3627e311c ("RDMA/hns: Optimize wqe buffer set flow for post send")
>> Signed-off-by: Weihang Li <liweihang@huawei.com>
>> ---
>>  drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 10 +++++-----
>>  1 file changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
>> index 7a0c1ab..15e1313 100644
>> --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
>> +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
>> @@ -433,6 +433,10 @@ static int fill_ud_av(struct hns_roce_v2_ud_send_wqe *ud_sq_wqe,
>>  		       V2_UD_SEND_WQE_BYTE_36_TCLASS_S, ah->av.tclass);
>>  	roce_set_field(ud_sq_wqe->byte_40, V2_UD_SEND_WQE_BYTE_40_FLOW_LABEL_M,
>>  		       V2_UD_SEND_WQE_BYTE_40_FLOW_LABEL_S, ah->av.flowlabel);
>> +
>> +	if (WARN_ON(ah->av.sl > MAX_SERVICE_LEVEL))
>> +		return -EINVAL;
>> +
>>  	roce_set_field(ud_sq_wqe->byte_40, V2_UD_SEND_WQE_BYTE_40_SL_M,
>>  		       V2_UD_SEND_WQE_BYTE_40_SL_S, ah->av.sl);
>>  
>> @@ -4609,12 +4613,8 @@ static int hns_roce_v2_set_path(struct ib_qp *ibqp,
>>  	memset(qpc_mask->dgid, 0, sizeof(grh->dgid.raw));
>>  
>>  	hr_qp->sl = rdma_ah_get_sl(&attr->ah_attr);
>> -	if (unlikely(hr_qp->sl > MAX_SERVICE_LEVEL)) {
>> -		ibdev_err(ibdev,
>> -			  "failed to fill QPC, sl (%d) shouldn't be larger than %d.\n",
>> -			  hr_qp->sl, MAX_SERVICE_LEVEL);
>> +	if (WARN_ON(hr_qp->sl > MAX_SERVICE_LEVEL))
>>  		return -EINVAL;
>> -	}
>>  
>>  	roce_set_field(context->byte_28_at_fl, V2_QPC_BYTE_28_SL_M,
>>  		       V2_QPC_BYTE_28_SL_S, hr_qp->sl);
> 
> Can any of these warn_on's be triggered by user space? That would not
> be OK
> 
> Jason
> 

Hi Jason,

Thanks for your comments, I understand that error that can be triggered by
userspace shouldn't use WARN_ON(). So I shouldn't use WARN_ON() in
hns_roce_v2_set_path().

As for the error in process of post_send, you suggested me to warn_on if
a kernel user try to pass in an illegal opcode. So I guess I should use
WARN_ON() too in sl's check when filling a UD WQE. Am I right?

Weihang