Linux RDMA and InfiniBand development
 help / color / mirror / Atom feed
From: liweihang <liweihang@huawei.com>
To: Jason Gunthorpe <jgg@ziepe.ca>
Cc: "dledford@redhat.com" <dledford@redhat.com>,
	"leon@kernel.org" <leon@kernel.org>,
	"linux-rdma@vger.kernel.org" <linux-rdma@vger.kernel.org>,
	Linuxarm <linuxarm@huawei.com>
Subject: Re: [PATCH v2 for-next 05/11] RDMA/hns: WARN_ON if get a reserved sl from users
Date: Thu, 10 Dec 2020 13:55:11 +0000	[thread overview]
Message-ID: <54849771e0724e8eb05757996dca9716@huawei.com> (raw)
In-Reply-To: 20201210134516.GY5487@ziepe.ca

On 2020/12/10 21:45, Jason Gunthorpe wrote:
> On Thu, Dec 10, 2020 at 04:00:16AM +0000, liweihang wrote:
>> On 2020/12/10 5:09, Jason Gunthorpe wrote:
>>> On Fri, Dec 04, 2020 at 06:40:30PM +0800, Weihang Li wrote:
>>>> According to the RoCE v1 specification, the sl (service level) 0-7 are
>>>> mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
>>>> driver should verify whether the value of sl is larger than 7, if so, an
>>>> exception should be returned.
>>>>
>>>> Fixes: 172505cfa3a8 ("RDMA/hns: Add check for the validity of sl configuration")
>>>> Fixes: d6a3627e311c ("RDMA/hns: Optimize wqe buffer set flow for post send")
>>>> Signed-off-by: Weihang Li <liweihang@huawei.com>
>>>>  drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 10 +++++-----
>>>>  1 file changed, 5 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
>>>> index 7a0c1ab..15e1313 100644
>>>> +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
>>>> @@ -433,6 +433,10 @@ static int fill_ud_av(struct hns_roce_v2_ud_send_wqe *ud_sq_wqe,
>>>>  		       V2_UD_SEND_WQE_BYTE_36_TCLASS_S, ah->av.tclass);
>>>>  	roce_set_field(ud_sq_wqe->byte_40, V2_UD_SEND_WQE_BYTE_40_FLOW_LABEL_M,
>>>>  		       V2_UD_SEND_WQE_BYTE_40_FLOW_LABEL_S, ah->av.flowlabel);
>>>> +
>>>> +	if (WARN_ON(ah->av.sl > MAX_SERVICE_LEVEL))
>>>> +		return -EINVAL;
>>>> +
>>>>  	roce_set_field(ud_sq_wqe->byte_40, V2_UD_SEND_WQE_BYTE_40_SL_M,
>>>>  		       V2_UD_SEND_WQE_BYTE_40_SL_S, ah->av.sl);
>>>>  
>>>> @@ -4609,12 +4613,8 @@ static int hns_roce_v2_set_path(struct ib_qp *ibqp,
>>>>  	memset(qpc_mask->dgid, 0, sizeof(grh->dgid.raw));
>>>>  
>>>>  	hr_qp->sl = rdma_ah_get_sl(&attr->ah_attr);
>>>> -	if (unlikely(hr_qp->sl > MAX_SERVICE_LEVEL)) {
>>>> -		ibdev_err(ibdev,
>>>> -			  "failed to fill QPC, sl (%d) shouldn't be larger than %d.\n",
>>>> -			  hr_qp->sl, MAX_SERVICE_LEVEL);
>>>> +	if (WARN_ON(hr_qp->sl > MAX_SERVICE_LEVEL))
>>>>  		return -EINVAL;
>>>> -	}
>>>>  
>>>>  	roce_set_field(context->byte_28_at_fl, V2_QPC_BYTE_28_SL_M,
>>>>  		       V2_QPC_BYTE_28_SL_S, hr_qp->sl);
>>>
>>> Can any of these warn_on's be triggered by user space? That would not
>>> be OK
>>>
>>> Jason
>>>
>>
>> Hi Jason,
>>
>> Thanks for your comments, I understand that error that can be triggered by
>> userspace shouldn't use WARN_ON(). So I shouldn't use WARN_ON() in
>> hns_roce_v2_set_path().
>>
>> As for the error in process of post_send, you suggested me to warn_on if
>> a kernel user try to pass in an illegal opcode. So I guess I should use
>> WARN_ON() too in sl's check when filling a UD WQE. Am I right?
> 
> Userspace should not be able to trigger warn_on
> 
> Bad kernel ULPs are OK to trigger warn_on
> 
> Jason
> 

I see, Thank you.

Weihang

  reply	other threads:[~2020-12-10 13:56 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-04 10:40 [PATCH v2 for-next 00/11] RDMA/hns: Updates for 5.11 Weihang Li
2020-12-04 10:40 ` [PATCH v2 for-next 01/11] RDMA/hns: Limit the length of data copied between kernel and userspace Weihang Li
2020-12-04 10:40 ` [PATCH v2 for-next 02/11] RDMA/hns: Normalization the judgment of some features Weihang Li
2020-12-04 10:40 ` [PATCH v2 for-next 03/11] RDMA/hns: Do shift on traffic class when using RoCEv2 Weihang Li
2020-12-04 10:40 ` [PATCH v2 for-next 04/11] RDMA/hns: Avoid filling sl in high 3 bits of vlan_id Weihang Li
2020-12-04 10:40 ` [PATCH v2 for-next 05/11] RDMA/hns: WARN_ON if get a reserved sl from users Weihang Li
2020-12-09 21:09   ` Jason Gunthorpe
2020-12-10  4:00     ` liweihang
2020-12-10 13:45       ` Jason Gunthorpe
2020-12-10 13:55         ` liweihang [this message]
2020-12-04 10:40 ` [PATCH v2 for-next 06/11] RDMA/hns: Remove unnecessary access right set during INIT2INIT Weihang Li
2020-12-04 10:40 ` [PATCH v2 for-next 07/11] RDMA/hns: Fix coding style issues Weihang Li
2020-12-04 10:40 ` [PATCH v2 for-next 08/11] RDMA/hns: Clear redundant variable initialization Weihang Li
2020-12-04 10:40 ` [PATCH v2 for-next 09/11] RDMA/hns: Fix incorrect symbol types Weihang Li
2020-12-04 10:40 ` [PATCH v2 for-next 10/11] RDMA/hns: Fix inaccurate prints Weihang Li
2020-12-04 10:40 ` [PATCH v2 for-next 11/11] RDMA/hns: Simplify AEQE process for different types of queue Weihang Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54849771e0724e8eb05757996dca9716@huawei.com \
    --to=liweihang@huawei.com \
    --cc=dledford@redhat.com \
    --cc=jgg@ziepe.ca \
    --cc=leon@kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox