From: Jonathan Flynn <jonathan.flynn@hammerspace.com>
To: Chuck Lever <cel@kernel.org>, Mike Snitzer <snitzer@kernel.org>
Cc: linux-nfs@vger.kernel.org, linux-rdma@vger.kernel.org,
Chuck Lever <chuck.lever@oracle.com>
Subject: RE: [PATCH] svcrdma: Avoid direct reclaim when allocating Read sink buffers
Date: Fri, 5 Jun 2026 16:39:20 -0600 [thread overview]
Message-ID: <32141f1303369612966329d18bc37c0d@mail.gmail.com> (raw)
In-Reply-To: <20260605223118.75092-1-cel@kernel.org>
Thanks Chuck, give me a few to test it out!
> -----Original Message-----
> From: Chuck Lever <cel@kernel.org>
> Sent: Friday, June 5, 2026 4:31 PM
> To: Mike Snitzer <snitzer@kernel.org>
> Cc: linux-nfs@vger.kernel.org; linux-rdma@vger.kernel.org; Chuck Lever
> <chuck.lever@oracle.com>; Jonathan Flynn
> <jonathan.flynn@hammerspace.com>
> Subject: [PATCH] svcrdma: Avoid direct reclaim when allocating Read sink
> buffers
>
> From: Chuck Lever <chuck.lever@oracle.com>
>
> svc_rdma_alloc_read_pages() passes __GFP_NORETRY, which limits the
> allocator to a single round of direct reclaim and asynchronous
compaction per
> attempt. Under memory pressure or fragmentation that round can take a
long
> time, and the fallback loop repeats it at each order, multiplying the
stall while
> the RPC waits for its Read sink buffer.
>
> The contiguous allocation is opportunistic: when it fails, Read sink
buffers
> come from the pages already in rq_pages[]. Direct reclaim effort buys
little
> here. Allocate with GFP_NOWAIT instead, which omits
> __GFP_DIRECT_RECLAIM so the allocator takes pages only from the free
lists
> and returns NULL immediately when none are available. GFP_NOWAIT retains
> __GFP_KSWAPD_RECLAIM, so a failed attempt still wakes kswapd to
replenish
> higher-order pages in the background, and it already includes
> __GFP_NOWARN. __GFP_NORETRY has no effect once direct reclaim is off.
> skb_page_frag_refill() takes the same approach for its opportunistic
high-
> order allocation.
>
> Reported-by: Jonathan Flynn <jonathan.flynn@hammerspace.com>
> Fixes: 18755b8c2f24 ("svcrdma: Use contiguous pages for RDMA Read sink
> buffers")
> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
> ---
> net/sunrpc/xprtrdma/svc_rdma_rw.c | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
>
> Given the perf symbol resolution inaccuracies I can't swear this will
fix the
> issue, but here's a stab at it.
>
>
> diff --git a/net/sunrpc/xprtrdma/svc_rdma_rw.c
> b/net/sunrpc/xprtrdma/svc_rdma_rw.c
> index 587e4cd29303..efde26cac961 100644
> --- a/net/sunrpc/xprtrdma/svc_rdma_rw.c
> +++ b/net/sunrpc/xprtrdma/svc_rdma_rw.c
> @@ -746,10 +746,9 @@ int svc_rdma_prepare_reply_chunk(struct
> svcxprt_rdma *rdma, }
>
> /*
> - * Cap contiguous RDMA Read sink allocations at order-4.
> - * Higher orders risk allocation failure under
> - * __GFP_NORETRY, which would negate the benefit of the
> - * contiguous fast path.
> + * Cap contiguous RDMA Read sink allocations at order-4. Higher orders
> + risk
> + * allocation failure under GFP_NOWAIT, which would negate the benefit
> + of
> + * the contiguous fast path.
> */
> #define SVC_RDMA_CONTIG_MAX_ORDER 4
>
> @@ -758,9 +757,11 @@ int svc_rdma_prepare_reply_chunk(struct
> svcxprt_rdma *rdma,
> * @nr_pages: number of pages needed
> * @order: on success, set to the allocation order
> *
> - * Attempts a higher-order allocation, falling back to smaller orders.
> - * The returned pages are split immediately so each sub-page has its
> - * own refcount and can be freed independently.
> + * Attempts a higher-order allocation, falling back to smaller orders.
> + The
> + * allocation is opportunistic: it takes pages only from the free
> + lists,
> + * without direct reclaim, so it fails fast under memory pressure. The
> + * returned pages are split immediately so each sub-page has its own
> + * refcount and can be freed independently.
> *
> * Returns a pointer to the first page on success, or NULL if even
> * order-1 allocation fails.
> @@ -775,8 +776,7 @@ svc_rdma_alloc_read_pages(unsigned int nr_pages,
> unsigned int *order)
> SVC_RDMA_CONTIG_MAX_ORDER);
>
> while (o >= 1) {
> - page = alloc_pages(GFP_KERNEL | __GFP_NORETRY |
> __GFP_NOWARN,
> - o);
> + page = alloc_pages(GFP_NOWAIT, o);
> if (page) {
> split_page(page, o);
> *order = o;
> --
> 2.54.0
next prev parent reply other threads:[~2026-06-05 22:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-05 22:31 [PATCH] svcrdma: Avoid direct reclaim when allocating Read sink buffers Chuck Lever
2026-06-05 22:39 ` Jonathan Flynn [this message]
2026-06-05 23:13 ` Jonathan Flynn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32141f1303369612966329d18bc37c0d@mail.gmail.com \
--to=jonathan.flynn@hammerspace.com \
--cc=cel@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=snitzer@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox