From: sashiko-bot@kernel.org
To: "Yanze Zhang" <zhang.yanze@zte.com.cn>
Cc: linux-rdma@vger.kernel.org
Subject: Re: [PATCH 5/7] RDMA/zrdma: Add device probe and remove logic
Date: Sat, 24 Oct 2026 07:38:30 +0000 [thread overview]
Message-ID: <sashiko-outbox-183588@kernel.org> (raw)
In-Reply-To: <20261024071539.2182864-6-zhang.yanze@zte.com.cn>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] RDMA/zrdma: memory leaks on error paths in zxdh_probe()
--
commit 28ece0add9abc6cac3d040b5b5512cf8b3c518c3
Author: Yanze Zhang <zhang.yanze@zte.com.cn>
RDMA/zrdma: Add device probe and remove logic
This commit implements the auxiliary bus probe and remove callbacks for the
zrdma driver, including device initialization, hardware resource setup, and
IB device registration.
> diff --git a/drivers/infiniband/hw/zrdma/zrdma_main.c b/drivers/infiniband/hw/zrdma/zrdma_main.c
> new file mode 100644
> index 0000000000000..5127e56fd1642
> --- /dev/null
> +++ b/drivers/infiniband/hw/zrdma/zrdma_main.c
> @@ -0,0 +1,294 @@
[ ... ]
> +static int zxdh_probe(struct auxiliary_device *aux_dev,
> + const struct auxiliary_device_id *id)
> +{
> + struct zxdh_auxiliary_dev *zxdh_adev =
> + container_of(aux_dev, struct zxdh_auxiliary_dev, adev);
> + struct zxdh_handler *hdl;
> + struct zxdh_device *zdev;
> + struct zxdh_pci_f *rf;
> + struct net_device *netdev;
> + int err;
> +
> + if (!zxdh_adev->rdma_ops || !zxdh_adev->rdma_ops->get_rdma_netdev) {
> + pr_err("zrdma: rdma_ops or get_rdma_netdev is NULL\n");
> + return -EINVAL;
> + }
> +
> + netdev = zxdh_adev->rdma_ops->get_rdma_netdev(zxdh_adev->parent);
> + if (!netdev) {
> + pr_err("zrdma: failed to get netdev\n");
> + return -ENODEV;
> + }
> +
> + zdev = ib_alloc_device(zxdh_device, ibdev);
> + if (!zdev)
> + return -ENOMEM;
> +
> + zdev->zxdh_adev = zxdh_adev;
> + zdev->netdev = netdev;
> +
> + zdev->rf = kzalloc_obj(*zdev->rf);
> + if (!zdev->rf) {
> + ib_dealloc_device(&zdev->ibdev);
> + return -ENOMEM;
> + }
> +
> + zxdh_fill_device_info(zdev, zxdh_adev->zxdh_info);
> +
> + hdl = kzalloc_obj(*hdl);
> + if (!hdl) {
> + ib_dealloc_device(&zdev->ibdev);
> + return -ENOMEM;
> + }
> +
> + hdl->zdev = zdev;
> + zdev->hdl = hdl;
> + zdev->netdev_speed = SPEED_UNKNOWN;
> +
> + rf = zdev->rf;
> + err = zxdh_ctrl_init_hw(rf);
> + if (err)
> + goto err_ctrl_init;
> +
> + err = zxdh_ib_register_device(zdev);
> + if (err)
> + goto err_ib_reg;
> +
> + /* Publish the handler only after the device is registered, so a
> + * failed probe cannot leave a freed handler on the global list.
> + */
> + zxdh_add_handler(hdl);
> +
> + dev_set_drvdata(&aux_dev->dev, zdev);
> +
> + return 0;
> +
> +err_ib_reg:
> +err_ctrl_init:
> + ib_dealloc_device(&zdev->ibdev);
> +
> + return err;
> +}
[Severity: Medium]
Does zxdh_probe() leak zdev->rf, hdl, and the hardware resource buffers on its
error paths?
When kzalloc_obj(*hdl) fails, zxdh_probe() calls
ib_dealloc_device(&zdev->ibdev) and returns -ENOMEM without freeing zdev->rf
or destroying zdev->ah_list_lock initialized in zxdh_fill_device_info().
Similarly, zxdh_ctrl_init_hw() -> zxdh_initialize_hw_rsrc() allocates
rf->qp_cnt_8k_idxs and rf->mem_rsrc with vzalloc():
drivers/infiniband/hw/zrdma/zrdma_hw.c:zxdh_initialize_hw_rsrc() {
...
rf->qp_cnt_8k_idxs = vzalloc(rf->max_8k_idx * sizeof(u32));
if (!rf->qp_cnt_8k_idxs) {
ret = -ENOMEM;
goto mem_8k_qp_cnt_vmalloc_fail;
}
rsrc_size = zxdh_calc_mem_rsrc_size(rf);
rf->mem_rsrc = vzalloc(rsrc_size);
...
}
If zxdh_ctrl_init_hw() or zxdh_ib_register_device() fails, jumping to
err_ctrl_init or err_ib_reg only calls ib_dealloc_device(&zdev->ibdev),
leaking hdl, zdev->rf, rf->qp_cnt_8k_idxs, and rf->mem_rsrc.
Later in the series, commit 42854f9bc8b3 ("RDMA/zrdma: Implement context, PD,
and mmap operations") wires up zxdh_ib_dealloc_device() as .dealloc_driver in
zxdh_dev_ops. However, ib_set_device_ops(&zdev->ibdev, &zxdh_dev_ops) is only
called inside zxdh_ib_register_device() -> zxdh_init_rdma_device() after the
roce_mode check. If zxdh_probe() fails at the hdl allocation, during
zxdh_ctrl_init_hw(), or before ib_set_device_ops() is reached,
zdev->ibdev.ops.dealloc_driver is still NULL when ib_dealloc_device() runs, so
zxdh_ib_dealloc_device() will not be called to clean up those allocations
(and hdl is not freed by zxdh_ib_dealloc_device() either).
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261024071539.2182864-1-zhang.yanze@zte.com.cn?part=5
next prev parent reply other threads:[~2026-10-24 7:38 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-24 7:15 [PATCH rdma v6 0/7] Add ZTE DingHai Ethernet Protocol Driver for RDMA Yanze Zhang
2026-10-24 7:15 ` [PATCH 1/7] RDMA/zrdma: Add build infrastructure and module skeleton Yanze Zhang
2026-10-24 7:34 ` sashiko-bot
2026-10-24 7:15 ` [PATCH 2/7] RDMA/zrdma: Add core data structures and ABI definitions Yanze Zhang
2026-10-24 7:32 ` sashiko-bot
2026-10-24 18:33 ` kernel test robot
2026-10-24 7:15 ` [PATCH 3/7] RDMA/zrdma: Add internal headers and hardware register definitions Yanze Zhang
2026-10-24 7:31 ` sashiko-bot
2026-10-24 8:43 ` [PATCH v6? " Markus Elfring
2026-10-24 7:15 ` [PATCH 4/7] RDMA/zrdma: Add hardware resource initialization and verbs skeleton Yanze Zhang
2026-10-24 7:36 ` sashiko-bot
2026-10-24 7:15 ` [PATCH 5/7] RDMA/zrdma: Add device probe and remove logic Yanze Zhang
2026-10-24 7:38 ` sashiko-bot [this message]
2026-10-24 7:15 ` [PATCH 6/7] RDMA/zrdma: Implement context, PD, and mmap operations Yanze Zhang
2026-10-24 7:43 ` sashiko-bot
2026-10-24 7:15 ` [PATCH 7/7] RDMA/zrdma: Implement device and port query operations Yanze Zhang
2026-10-24 7:45 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-183588@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=zhang.yanze@zte.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox