Re: [PATCH v2 2/8] media: rcar-vin: Add support for R-Car R8A77990

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Jacopo,

Thank you for the patch.

On Wednesday, 5 September 2018 18:29:39 EEST Jacopo Mondi wrote:
> Add R-Car E3 R8A77990 SoC to the rcar-vin supported ones.
> Based on the experimental patch from Magnus Damm.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/media/platform/rcar-vin/rcar-core.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-core.c
> b/drivers/media/platform/rcar-vin/rcar-core.c index ce09799..d443c09 100644
> --- a/drivers/media/platform/rcar-vin/rcar-core.c
> +++ b/drivers/media/platform/rcar-vin/rcar-core.c
> @@ -1085,6 +1085,22 @@ static const struct rvin_info rcar_info_r8a77970 = {
>  	.routes = rcar_info_r8a77970_routes,
>  };
> 
> +static const struct rvin_group_route rcar_info_r8a77990_routes[] = {
> +	{ .csi = RVIN_CSI40, .channel = 0, .vin = 4, .mask = BIT(0) | BIT(3) },
> +	{ .csi = RVIN_CSI40, .channel = 0, .vin = 5, .mask = BIT(2) },
> +	{ .csi = RVIN_CSI40, .channel = 1, .vin = 4, .mask = BIT(2) },
> +	{ .csi = RVIN_CSI40, .channel = 1, .vin = 5, .mask = BIT(1) | BIT(3) },
> +	{ /* Sentinel */ }
> +};
> +
> +static const struct rvin_info rcar_info_r8a77990 = {
> +	.model = RCAR_GEN3,
> +	.use_mc = true,
> +	.max_width = 4096,
> +	.max_height = 4096,
> +	.routes = rcar_info_r8a77990_routes,
> +};
> +
>  static const struct rvin_group_route rcar_info_r8a77995_routes[] = {
>  	{ /* Sentinel */ }
>  };
> @@ -1143,6 +1159,10 @@ static const struct of_device_id rvin_of_id_table[] =
> { .data = &rcar_info_r8a77970,
>  	},
>  	{
> +		.compatible = "renesas,vin-r8a77990",
> +		.data = &rcar_info_r8a77990,
> +	},
> +	{
>  		.compatible = "renesas,vin-r8a77995",
>  		.data = &rcar_info_r8a77995,
>  	},

-- 
Regards,

Laurent Pinchart