From: jacopo mondi <jacopo@jmondi.org>
To: Simon Horman <horms@verge.net.au>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Jacopo Mondi <jacopo+renesas@jmondi.org>,
geert@linux-m68k.org, kieran.bingham+renesas@ideasonboard.com,
niklas.soderlund+renesas@ragnatech.se,
damm+renesas@opensource.se, ulrich.hecht+renesas@gmail.com,
linux-renesas-soc@vger.kernel.org,
Koji Matsuoka <koji.matsuoka.xm@renesas.com>,
Takeshi Kihara <takeshi.kihara.df@renesas.com>
Subject: Re: [PATCH v2 6/8] arm64: dts: r8a77990: Add VIN and CSI-2 device nodes
Date: Wed, 31 Oct 2018 14:18:40 +0100 [thread overview]
Message-ID: <20181031131840.GL15991@w540> (raw)
In-Reply-To: <20181031124812.vig3zim5ilht44m6@verge.net.au>
[-- Attachment #1: Type: text/plain, Size: 5975 bytes --]
Hi Simon,
On Wed, Oct 31, 2018 at 01:48:13PM +0100, Simon Horman wrote:
> On Tue, Oct 30, 2018 at 02:57:59PM +0200, Laurent Pinchart wrote:
> > Hi Jacopo,
> >
> > On Tuesday, 30 October 2018 12:14:31 EET jacopo mondi wrote:
> > > On Mon, Sep 10, 2018 at 05:12:30PM +0300, Laurent Pinchart wrote:
> > > > On Wednesday, 5 September 2018 18:29:43 EEST Jacopo Mondi wrote:
> > > >> From: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
> > > >>
> > > >> Add device nodes for VIN4, VIN5 and CSI40 to R-Car E3 R8A77990 device
> > > >> tree.
> > > >>
> > > >> Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
> > > >> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> > > >> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > >> ---
> > > >>
> > > >> arch/arm64/boot/dts/renesas/r8a77990.dtsi | 79 ++++++++++++++++++++++++
> > > >> 1 file changed, 79 insertions(+)
> > > >>
> > > >> diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > > >> b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index ae89260..0ae7bbe
> > > >> 100644
> > > >> --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > > >> +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > > >> @@ -337,6 +337,85 @@
> > > >>
> > > >> status = "disabled";
> > > >>
> > > >> };
> > > >>
> > > >> + csi40: csi2@feaa0000 {
> > > >
> > > > I believe Simon would like to keep the nodes sorted by address
> > > >
> > > >> + compatible = "renesas,r8a77990-csi2", "renesas,rcar-gen3-csi2";
> > > >> + reg = <0 0xfeaa0000 0 0x10000>;
> > > >
> > > > 0x10000 seems pretty large to me.
> > >
> > > It seems to me that all Gen3 SoC have this lenght specified
> > >
> > > $git grep -A 10 'csi[2|4][0|1]: csi' arch/arm64/boot/dts/renesas/ | grep reg
> > > arch/arm64/boot/dts/renesas/r8a7795.dtsi- reg = <0 0xfea80000 0 0x10000>;
> > > arch/arm64/boot/dts/renesas/r8a7795.dtsi- reg = <0 0xfeaa0000 0 0x10000>;
> > > arch/arm64/boot/dts/renesas/r8a7795.dtsi- reg = <0 0xfeab0000 0 0x10000>;
> > > arch/arm64/boot/dts/renesas/r8a7796.dtsi- reg = <0 0xfea80000 0 0x10000>;
> > > arch/arm64/boot/dts/renesas/r8a7796.dtsi- reg = <0 0xfeaa0000 0 0x10000>;
> > > arch/arm64/boot/dts/renesas/r8a77965.dtsi- reg = <0 0xfea80000 0 0x10000>;
> > > arch/arm64/boot/dts/renesas/r8a77965.dtsi- reg = <0 0xfeaa0000 0 0x10000>;
> > > arch/arm64/boot/dts/renesas/r8a77970.dtsi- reg = <0 0xfeaa0000 0 0x10000>;
> > > arch/arm64/boot/dts/renesas/r8a77980.dtsi- reg = <0 0xfeaa0000 0 0x10000>;
> > > arch/arm64/boot/dts/renesas/r8a77980.dtsi- reg = <0 0xfeab0000 0 0x10000>;
> > > arch/arm64/boot/dts/renesas/r8a77990.dtsi- reg = <0 0xfeaa0000 0 0x10000>;
> > >
> > > Am I missing something?
> >
> > Cargo-cult programming ? :-) This will likely not hurt, but such a large
> > memory area is not required, and we'll save a bit of memory if we reduce the
> > mapping from 64kB to 4kB (or less)
>
> Can we please update this patch, and existing dtsi files,
> to use an appropriately small register window?
>
What if we keep this one as it is and we change all the DTSIs in one
go?
> >
> > > > Apart from that,
> > >
> > > I will include the upporting of the following patch to fix the VIN
> > > endpoint numbering in forthcoming v3:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git/commit
> > > /?id=1b1b73f7558d867d72e198901b84bec1e6ef1405
> > >
> > > As this has already been applied to simon's tree.
> > >
> > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > > >
> > > >> + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
> > > >> + clocks = <&cpg CPG_MOD 716>;
> > > >> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > > >> + resets = <&cpg 716>;
> > > >> + status = "disabled";
> > > >> +
> > > >> + ports {
> > > >> + #address-cells = <1>;
> > > >> + #size-cells = <0>;
> > > >> +
> > > >> + port@1 {
> > > >> + #address-cells = <1>;
> > > >> + #size-cells = <0>;
> > > >> +
> > > >> + reg = <1>;
> > > >> +
> > > >> + csi40vin4: endpoint@0 {
> > > >> + reg = <0>;
> > > >> + remote-endpoint = <&vin4csi40>;
> > > >> + };
> > > >> + csi40vin5: endpoint@1 {
> > > >> + reg = <1>;
> > > >> + remote-endpoint = <&vin5csi40>;
> > > >> + };
> > > >> + };
> > > >> + };
> > > >> + };
> > > >> +
> > > >> + vin4: video@e6ef4000 {
> > > >> + compatible = "renesas,vin-r8a77990";
> > > >> + reg = <0 0xe6ef4000 0 0x1000>;
> > > >> + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> > > >> + clocks = <&cpg CPG_MOD 807>;
> > > >> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > > >> + resets = <&cpg 807>;
> > > >> + renesas,id = <4>;
> > > >> + status = "disabled";
> > > >> +
> > > >> + ports {
> > > >> + #address-cells = <1>;
> > > >> + #size-cells = <0>;
> > > >> +
> > > >> + port@1 {
> > > >> + reg = <1>;
> > > >> +
> > > >> + vin4csi40: endpoint {
> > > >> + remote-endpoint= <&csi40vin4>;
> > > >> + };
> > > >> + };
> > > >> + };
> > > >> + };
> > > >> +
> > > >> + vin5: video@e6ef5000 {
> > > >> + compatible = "renesas,vin-r8a77990";
> > > >> + reg = <0 0xe6ef5000 0 0x1000>;
> > > >> + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
> > > >> + clocks = <&cpg CPG_MOD 806>;
> > > >> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > > >> + resets = <&cpg 806>;
> > > >> + renesas,id = <5>;
> > > >> + status = "disabled";
> > > >> +
> > > >> + ports {
> > > >> + #address-cells = <1>;
> > > >> + #size-cells = <0>;
> > > >> +
> > > >> + port@1 {
> > > >> + reg = <1>;
> > > >> +
> > > >> + vin5csi40: endpoint {
> > > >> + remote-endpoint= <&csi40vin5>;
> > > >> + };
> > > >> + };
> > > >> + };
> > > >> + };
> > > >> +
> > > >> scif2: serial@e6e88000 {
> > > >> compatible = "renesas,scif-r8a77990",
> > > >> "renesas,rcar-gen3-scif", "renesas,scif";
> >
> > --
> > Regards,
> >
> > Laurent Pinchart
> >
> >
> >
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2018-10-31 22:16 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-05 15:29 [PATCH/RFT v2 0/8] arm64: dts: renesas: Ebisu: Add HDMI and CVBS input Jacopo Mondi
2018-09-05 15:29 ` [PATCH v2 1/8] media: dt-bindings: rcar-vin: Add R8A77990 support Jacopo Mondi
2018-09-10 12:42 ` Simon Horman
2018-09-10 13:58 ` Laurent Pinchart
2018-09-10 18:15 ` Niklas Söderlund
2018-09-05 15:29 ` [PATCH v2 2/8] media: rcar-vin: Add support for R-Car R8A77990 Jacopo Mondi
2018-09-10 14:02 ` Laurent Pinchart
2018-09-10 18:18 ` Niklas Söderlund
2018-09-05 15:29 ` [PATCH v2 3/8] media: dt-bindings: rcar-csi2: Add R8A77990 Jacopo Mondi
2018-09-10 12:45 ` Simon Horman
2018-09-10 14:04 ` Laurent Pinchart
2018-09-10 18:19 ` Niklas Söderlund
2018-09-05 15:29 ` [PATCH v2 4/8] media: rcar-csi2: Add R8A77990 support Jacopo Mondi
2018-09-10 14:05 ` Laurent Pinchart
2018-09-10 18:20 ` Niklas Söderlund
2018-09-05 15:29 ` [PATCH v2 5/8] pinctrl: sh-pfc: r8a77990: Add VIN pins, groups and functions Jacopo Mondi
2018-09-10 13:01 ` Simon Horman
2018-09-11 7:44 ` jacopo mondi
2018-09-11 8:15 ` Geert Uytterhoeven
2018-09-11 8:54 ` jacopo mondi
2018-09-11 9:44 ` jacopo mondi
2018-09-28 7:46 ` jacopo mondi
2018-10-02 9:25 ` Geert Uytterhoeven
2018-10-19 16:55 ` jacopo mondi
2018-10-20 19:04 ` Geert Uytterhoeven
2018-09-05 15:29 ` [PATCH v2 6/8] arm64: dts: r8a77990: Add VIN and CSI-2 device nodes Jacopo Mondi
2018-09-06 9:10 ` Simon Horman
2018-09-06 9:16 ` Simon Horman
2018-09-10 14:12 ` Laurent Pinchart
2018-09-17 14:37 ` Laurent Pinchart
2018-10-30 10:14 ` jacopo mondi
2018-10-30 12:57 ` Laurent Pinchart
2018-10-31 12:48 ` Simon Horman
2018-10-31 13:18 ` jacopo mondi [this message]
2018-10-31 14:37 ` Simon Horman
2018-11-05 10:32 ` jacopo mondi
2018-11-06 14:02 ` Simon Horman
2018-09-05 15:29 ` [PATCH v2 7/8] arm64: dts: r8a77990: Add I2C " Jacopo Mondi
2018-09-05 16:12 ` Laurent Pinchart
2018-09-06 9:12 ` Simon Horman
2018-09-05 15:29 ` [PATCH v2 8/8] arm64: dts: renesas: ebisu: Add HDMI and CVBS input Jacopo Mondi
2018-09-10 14:21 ` Laurent Pinchart
2018-09-12 9:29 ` Simon Horman
2018-09-12 11:08 ` jacopo mondi
2018-09-17 7:09 ` Simon Horman
2018-09-17 15:22 ` [PATCH/RFT v2 0/8] arm64: dts: renesas: Ebisu: " Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181031131840.GL15991@w540 \
--to=jacopo@jmondi.org \
--cc=damm+renesas@opensource.se \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=jacopo+renesas@jmondi.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=koji.matsuoka.xm@renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=takeshi.kihara.df@renesas.com \
--cc=ulrich.hecht+renesas@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox