Linux Renesas SOC kernel development
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: horms@verge.net.au, linux-renesas-soc@vger.kernel.org,
	robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	devicetree@vger.kernel.org
Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: porter: add sound support
Date: Thu, 21 Jan 2016 14:36:01 -0800 (PST)	[thread overview]
Message-ID: <1872468.4EonQLNEFn@wasted.cogentembedded.com> (raw)
In-Reply-To: <1674850.BZpGW9kEud@wasted.cogentembedded.com>

Define the Porter board dependent part of the R8A7791 sound device node.
Add device node for Asahi Kasei AK4642 stereo codec  to the I2C2 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device  and the codec.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20160121-v4.4' tag of Simon Horman's
'renesas.git' repo.

 arch/arm/boot/dts/r8a7791-porter.dts |   71 +++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -8,6 +8,17 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4642
+ *
+ * SW3: 1: AK4642
+ *      3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7791.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -101,6 +112,30 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	x14_clk: x14-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-output-names = "audio_clock";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4642>;
+			clocks = <&x14_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -167,6 +202,16 @@
 		renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 		renesas,function = "du";
 	};
+
+	ssi_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		renesas,groups = "audio_clk_a";
+		renesas,function = "audio_clk";
+	};
 };
 
 &scif0 {
@@ -257,6 +302,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4642: codec@12 {
+		compatible = "asahi-kasei,ak4642";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in@20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -385,3 +436,23 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};


       reply	other threads:[~2016-01-21 22:36 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1674850.BZpGW9kEud@wasted.cogentembedded.com>
2016-01-21 22:36 ` Sergei Shtylyov [this message]
2016-01-25  0:35   ` [PATCH] ARM: dts: porter: add sound support Kuninori Morimoto
2016-01-26  0:43     ` Simon Horman
2016-01-26 14:31     ` Sergei Shtylyov
2016-01-26 22:14 ` [PATCH] ARM: dts: porter: add MAX3355 support Sergei Shtylyov
2016-01-28  5:49   ` Yoshihiro Shimoda
2016-01-29 20:28     ` Sergei Shtylyov
2016-01-29 20:49       ` Sergei Shtylyov
2016-02-01 11:17         ` Yoshihiro Shimoda
2016-02-01 17:54           ` Sergei Shtylyov
2016-02-01 19:00             ` Sergei Shtylyov
2016-02-15  1:45               ` Simon Horman
2016-02-15 10:59                 ` Sergei Shtylyov
2016-02-11 20:26 ` [PATCH] ARM: dts: silk: add sound support Sergei Shtylyov
2016-02-15  4:56   ` Kuninori Morimoto
2016-02-11 21:49 ` [PATCH] ARM: dts: porter: fix JP3 jumper description Sergei Shtylyov
2016-02-15  4:50   ` Kuninori Morimoto
2016-02-15 21:55     ` Simon Horman
2016-02-13 22:26 ` [PATCH] ARM: dts: porter: remove enable prop from HS-USB device node Sergei Shtylyov
2016-02-26 19:43   ` Sergei Shtylyov
2016-03-02  0:47     ` Simon Horman
2016-04-13 19:36 ` [PATCH] ARM: dts: silk: add DU pins Sergei Shtylyov
2016-06-17 20:53   ` Sergei Shtylyov
2016-06-20  8:35     ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1872468.4EonQLNEFn@wasted.cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=horms@verge.net.au \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox