Re: [RESEND PATCH v4 3/3] dt-bindings: drm: bridge: adi,adv7511.txt: convert to yaml

["Ricardo Cañuelo" <ricardo.canuelo@collabora.com>]

Hi,
 
> On Fri, Jun 18, 2021 at 09:55:38AM +0200, Geert Uytterhoeven wrote:
> > This causes lots of failures like:
> > 
> >     arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dt.yaml: hdmi@39:
> > 'avdd-supply' is a required property
> > 
> > Should all supplies be required?
> > Looking at the driver, missing supplies are automatically replaced by
> > dummy regulators by the regulator framework.
> 
> Generally speaking, I like DT bindings to be descriptive of the
> hardware, and thus require power supplies that are needed for the device
> to function, even if they are fixed supplies.
> 
> This being said, I think there's also room to group some power supplies
> together in the bindings, when they are not meant by the device to be
> controlled separately. In this specific case, we also need to take into
> account that the adv7511 and adv7533 have different supplies.

Thanks for the review, guys. Yes, there were some dtbs check warnings to
be expected, the consensus in a previous version of the patch was that
that shouldn't be a blocker for a binding conversion and that the *.dts
definitions should eventually be fixed to comply with the binding, which
is, IMO, a more reasonable process to keep the binding conversion
effort progressing.

Cheers,
Ricardo