* Re: [PATCH net-next] ravb: Remove rx buffer ALIGN [not found] <1461514567-23444-1-git-send-email-ykaneko0929@gmail.com> @ 2016-04-26 19:14 ` Sergei Shtylyov 2016-04-28 23:34 ` Simon Horman 2016-05-01 14:29 ` Yoshihiro Kaneko 0 siblings, 2 replies; 4+ messages in thread From: Sergei Shtylyov @ 2016-04-26 19:14 UTC (permalink / raw) To: Yoshihiro Kaneko, netdev Cc: David S. Miller, Simon Horman, Magnus Damm, linux-renesas-soc Hello. On 04/24/2016 07:16 PM, Yoshihiro Kaneko wrote: > From: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> > > Aligning the reception data size is not required. OK, the gen 2/3 manuals indeed don't require this. I assume the patch has been tested... > Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> > Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> I have a few comments though... > diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c > index 238b56f..66ed80c 100644 > --- a/drivers/net/ethernet/renesas/ravb_main.c > +++ b/drivers/net/ethernet/renesas/ravb_main.c > @@ -246,10 +246,10 @@ static void ravb_ring_format(struct net_device *ndev, int q) > for (i = 0; i < priv->num_rx_ring[q]; i++) { > /* RX descriptor */ > rx_desc = &priv->rx_ring[q][i]; > - /* The size of the buffer should be on 16-byte boundary. */ > - rx_desc->ds_cc = cpu_to_le16(ALIGN(PKT_BUF_SZ, 16)); > - dma_addr = dma_map_single(ndev->dev.parent, priv->rx_skb[q][i]->data, > - ALIGN(PKT_BUF_SZ, 16), > + rx_desc->ds_cc = cpu_to_le16(PKT_BUF_SZ); > + dma_addr = dma_map_single(ndev->dev.parent, > + priv->rx_skb[q][i]->data, Please don't reformat the lines above. > + PKT_BUF_SZ, > DMA_FROM_DEVICE); > /* We just set the data size to 0 for a failed mapping which > * should prevent DMA from happening... > @@ -557,8 +557,9 @@ static bool ravb_rx(struct net_device *ndev, int *quota, int q) > > skb = priv->rx_skb[q][entry]; > priv->rx_skb[q][entry] = NULL; > - dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr), > - ALIGN(PKT_BUF_SZ, 16), > + dma_unmap_single(ndev->dev.parent, > + le32_to_cpu(desc->dptr), Same here. [...] MBR, Sergei ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH net-next] ravb: Remove rx buffer ALIGN 2016-04-26 19:14 ` [PATCH net-next] ravb: Remove rx buffer ALIGN Sergei Shtylyov @ 2016-04-28 23:34 ` Simon Horman 2016-05-01 14:34 ` Yoshihiro Kaneko 2016-05-01 14:29 ` Yoshihiro Kaneko 1 sibling, 1 reply; 4+ messages in thread From: Simon Horman @ 2016-04-28 23:34 UTC (permalink / raw) To: Sergei Shtylyov Cc: Yoshihiro Kaneko, netdev, David S. Miller, Magnus Damm, linux-renesas-soc Hi Sergei, Hi Kaneko-san, On Tue, Apr 26, 2016 at 10:14:41PM +0300, Sergei Shtylyov wrote: > Hello. > > On 04/24/2016 07:16 PM, Yoshihiro Kaneko wrote: > > >From: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> > > > >Aligning the reception data size is not required. > > OK, the gen 2/3 manuals indeed don't require this. I assume the patch has > been tested... This morning I tested this patch applied on net-next using the r8a7795/salvator-x (Gen-3). My test was to boot to a user-space prompt using NFS root which was successful. I can run further tests on this setup if it would be useful. Unfortunately I do not have access to hardware to allow me to test this on Gen-2. > >Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> > >Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> > I have a few comments though... [...] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH net-next] ravb: Remove rx buffer ALIGN 2016-04-28 23:34 ` Simon Horman @ 2016-05-01 14:34 ` Yoshihiro Kaneko 0 siblings, 0 replies; 4+ messages in thread From: Yoshihiro Kaneko @ 2016-05-01 14:34 UTC (permalink / raw) To: Simon Horman Cc: Sergei Shtylyov, netdev, David S. Miller, Magnus Damm, linux-renesas-soc Hi Simon-san, Thank you for testing this patch! Thanks, kaneko 2016-04-29 8:34 GMT+09:00 Simon Horman <horms@verge.net.au>: > Hi Sergei, Hi Kaneko-san, > > On Tue, Apr 26, 2016 at 10:14:41PM +0300, Sergei Shtylyov wrote: >> Hello. >> >> On 04/24/2016 07:16 PM, Yoshihiro Kaneko wrote: >> >> >From: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> >> > >> >Aligning the reception data size is not required. >> >> OK, the gen 2/3 manuals indeed don't require this. I assume the patch has >> been tested... > > This morning I tested this patch applied on net-next using the > r8a7795/salvator-x (Gen-3). My test was to boot to a user-space prompt > using NFS root which was successful. I can run further tests on this setup > if it would be useful. > > Unfortunately I do not have access to hardware to allow me to test this > on Gen-2. > >> >Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> >> >Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> > > Tested-by: Simon Horman <horms+renesas@verge.net.au> > >> I have a few comments though... > > [...] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH net-next] ravb: Remove rx buffer ALIGN 2016-04-26 19:14 ` [PATCH net-next] ravb: Remove rx buffer ALIGN Sergei Shtylyov 2016-04-28 23:34 ` Simon Horman @ 2016-05-01 14:29 ` Yoshihiro Kaneko 1 sibling, 0 replies; 4+ messages in thread From: Yoshihiro Kaneko @ 2016-05-01 14:29 UTC (permalink / raw) To: Sergei Shtylyov Cc: netdev, David S. Miller, Simon Horman, Magnus Damm, linux-renesas-soc Hi Sergei, Sorry for the late reply. 2016-04-27 4:14 GMT+09:00 Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>: > Hello. > > On 04/24/2016 07:16 PM, Yoshihiro Kaneko wrote: > >> From: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> >> >> Aligning the reception data size is not required. > > > OK, the gen 2/3 manuals indeed don't require this. I assume the patch has > been tested... > >> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> >> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> > > > I have a few comments though... > >> diff --git a/drivers/net/ethernet/renesas/ravb_main.c >> b/drivers/net/ethernet/renesas/ravb_main.c >> index 238b56f..66ed80c 100644 >> --- a/drivers/net/ethernet/renesas/ravb_main.c >> +++ b/drivers/net/ethernet/renesas/ravb_main.c >> @@ -246,10 +246,10 @@ static void ravb_ring_format(struct net_device >> *ndev, int q) >> for (i = 0; i < priv->num_rx_ring[q]; i++) { >> /* RX descriptor */ >> rx_desc = &priv->rx_ring[q][i]; >> - /* The size of the buffer should be on 16-byte boundary. >> */ >> - rx_desc->ds_cc = cpu_to_le16(ALIGN(PKT_BUF_SZ, 16)); >> - dma_addr = dma_map_single(ndev->dev.parent, >> priv->rx_skb[q][i]->data, >> - ALIGN(PKT_BUF_SZ, 16), >> + rx_desc->ds_cc = cpu_to_le16(PKT_BUF_SZ); >> + dma_addr = dma_map_single(ndev->dev.parent, >> + priv->rx_skb[q][i]->data, > > > Please don't reformat the lines above. Got it. > >> + PKT_BUF_SZ, >> DMA_FROM_DEVICE); >> /* We just set the data size to 0 for a failed mapping >> which >> * should prevent DMA from happening... >> @@ -557,8 +557,9 @@ static bool ravb_rx(struct net_device *ndev, int >> *quota, int q) >> >> skb = priv->rx_skb[q][entry]; >> priv->rx_skb[q][entry] = NULL; >> - dma_unmap_single(ndev->dev.parent, >> le32_to_cpu(desc->dptr), >> - ALIGN(PKT_BUF_SZ, 16), >> + dma_unmap_single(ndev->dev.parent, >> + le32_to_cpu(desc->dptr), > > > Same here. Likewise. > > [...] > > MBR, Sergei > Thanks, kaneko ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-05-01 14:34 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1461514567-23444-1-git-send-email-ykaneko0929@gmail.com>
2016-04-26 19:14 ` [PATCH net-next] ravb: Remove rx buffer ALIGN Sergei Shtylyov
2016-04-28 23:34 ` Simon Horman
2016-05-01 14:34 ` Yoshihiro Kaneko
2016-05-01 14:29 ` Yoshihiro Kaneko
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox