Re: GEN2: Initialization of VIN failed at upstream v4.8-rc2

[Hiep Cao Minh <cm-hiep@jinso.co.jp>]

Hi Niklas,


On 09/12/2016 08:09 PM, Niklas Söderlund wrote:
> Hi Hiep,
>
> On 2016-09-12 18:33:49 +0900, Hiep Cao Minh wrote:
>> Hi Niklas
>>
>> As you know the information about initialization of VIN failed at upstream
>> v4.8-rc2
>>   from the report of "The failure summary report of GEN2 for Linux v4.8-rc2".
>> "…
>> [ 5.589485] [<c0549114>] (of_node_put) from [<c0510558>]
>> (rcar_vin_probe+0x1c4/0x2d0)
>> [ 5.612949] [<c0510394>] (rcar_vin_probe) from [<c040dd60>]
>> (platform_drv_probe+0x58/0xa4)
>> …
>> [ 5.942909] [<c040e6f0>] (__platform_driver_register) from [<c091fa58>]
>> (rcar_vin_driver_init+0x18/0x20)
>> [ 5.971318] [<c091fa40>] (rcar_vin_driver_init) from [<c0900e44>]
>> (do_one_initcall+0xb4/0x164) ...
>> ...”
>>
>> I have found the patch that causing of this issue:
>> "f00add9 [media] rcar-vin: add Renesas R-Car VIN driver"
>>
>> Please have a look at this issue when you have time.
> Thanks for finding this. I found out about this issue (which is only
> printed if some OF debug option is enabled) after the patch was picked
> up.
>
> The issue is already fixed and picked up in the media tree, see 83fba2c
> ([media] rcar-vin: rework how subdevice is found and bound).
Thanks for your fixed patch, We'll try it on our environment.

Jinso/Linux Team.
Hiep.