Re: [PATCH v2 14/22] dt-bindings: pinctrl: Add starfive,jhb100-per1-pinctrl

["Rob Herring (Arm)" <robh@kernel.org>]

On Thu, 14 May 2026 04:12:10 -0700, Changhuang Liang wrote:
> Add pinctrl bindings for StarFive JHB100 SoC Peripheral-1(per1) pinctrl
> controller.
> 
> Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
> ---
>  .../pinctrl/starfive,jhb100-per1-pinctrl.yaml | 175 ++++++++++++++++++
>  .../pinctrl/starfive,jhb100-pinctrl.h         |  38 ++++
>  2 files changed, 213 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per1-pinctrl.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per1-pinctrl.yaml:135:14: [warning] wrong indentation: expected 12 but found 13 (indentation)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per1-pinctrl.example.dtb: pinctrl@11b42000 (starfive,jhb100-per1-pinctrl): gpio-ranges:2: [32, 4] is too short
	from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260514111218.94519-15-changhuang.liang@starfivetech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv