* [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 @ 2021-07-02 1:43 Bin Meng 2021-07-02 1:43 ` [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node Bin Meng 2021-07-08 13:40 ` [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 Bin Meng 0 siblings, 2 replies; 11+ messages in thread From: Bin Meng @ 2021-07-02 1:43 UTC (permalink / raw) To: Palmer Dabbelt, Lewis Hanly, Atish Patra, linux-kernel, linux-riscv Cc: Bin Meng From: Bin Meng <bin.meng@windriver.com> Per the DT spec, 'local-mac-address' is used to specify MAC address that was assigned to the network device, while 'mac-address' is used to specify the MAC address that was last used by the boot program, and shall be used only if the value differs from 'local-mac-address' property value. Signed-off-by: Bin Meng <bin.meng@windriver.com> --- arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi index 0659068b62f7..a9c558366d61 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi @@ -317,7 +317,7 @@ emac1: ethernet@20112000 { reg = <0x0 0x20112000 0x0 0x2000>; interrupt-parent = <&plic>; interrupts = <70 71 72 73>; - mac-address = [00 00 00 00 00 00]; + local-mac-address = [00 00 00 00 00 00]; clocks = <&clkcfg 5>, <&clkcfg 2>; status = "disabled"; clock-names = "pclk", "hclk"; -- 2.25.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node 2021-07-02 1:43 [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 Bin Meng @ 2021-07-02 1:43 ` Bin Meng 2021-07-09 10:06 ` Conor.Dooley 2021-07-16 9:23 ` Geert Uytterhoeven 2021-07-08 13:40 ` [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 Bin Meng 1 sibling, 2 replies; 11+ messages in thread From: Bin Meng @ 2021-07-02 1:43 UTC (permalink / raw) To: Palmer Dabbelt, Lewis Hanly, Atish Patra, linux-kernel, linux-riscv Cc: Bin Meng From: Bin Meng <bin.meng@windriver.com> U-Boot expects this alias to be in place in order to fix up the mac address of the ethernet node. Note on the Icicle Kit board, currently only emac1 is enabled so it becomes the 'ethernet0'. Signed-off-by: Bin Meng <bin.meng@windriver.com> --- arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi index a9c558366d61..16cc6573107b 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi @@ -9,6 +9,10 @@ / { model = "Microchip MPFS Icicle Kit"; compatible = "microchip,mpfs-icicle-kit"; + aliases { + ethernet0 = &emac1; + }; + chosen { }; -- 2.25.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node 2021-07-02 1:43 ` [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node Bin Meng @ 2021-07-09 10:06 ` Conor.Dooley 2021-07-16 9:23 ` Geert Uytterhoeven 1 sibling, 0 replies; 11+ messages in thread From: Conor.Dooley @ 2021-07-09 10:06 UTC (permalink / raw) To: bmeng.cn, palmer, Lewis.Hanly, atish.patra, linux-kernel, linux-riscv Cc: bin.meng On 02/07/2021 02:43, Bin Meng wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > From: Bin Meng <bin.meng@windriver.com> > > U-Boot expects this alias to be in place in order to fix up the mac > address of the ethernet node. > > Note on the Icicle Kit board, currently only emac1 is enabled so it > becomes the 'ethernet0'. > > Signed-off-by: Bin Meng <bin.meng@windriver.com> > --- > > arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > index a9c558366d61..16cc6573107b 100644 > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > @@ -9,6 +9,10 @@ / { > model = "Microchip MPFS Icicle Kit"; > compatible = "microchip,mpfs-icicle-kit"; > > + aliases { > + ethernet0 = &emac1; > + }; > + > chosen { > }; Sure. Reviewed-by: conor dooley<conor.dooley@microchip.com> > -- > 2.25.1 > > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node 2021-07-02 1:43 ` [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node Bin Meng 2021-07-09 10:06 ` Conor.Dooley @ 2021-07-16 9:23 ` Geert Uytterhoeven 2021-07-16 10:14 ` Bin Meng 1 sibling, 1 reply; 11+ messages in thread From: Geert Uytterhoeven @ 2021-07-16 9:23 UTC (permalink / raw) To: Bin Meng Cc: Palmer Dabbelt, Lewis Hanly, Atish Patra, Linux Kernel Mailing List, linux-riscv, Bin Meng Hi Bing, On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote: > From: Bin Meng <bin.meng@windriver.com> > > U-Boot expects this alias to be in place in order to fix up the mac > address of the ethernet node. > > Note on the Icicle Kit board, currently only emac1 is enabled so it > becomes the 'ethernet0'. > > Signed-off-by: Bin Meng <bin.meng@windriver.com> Thanks for your patch! > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > @@ -9,6 +9,10 @@ / { > model = "Microchip MPFS Icicle Kit"; > compatible = "microchip,mpfs-icicle-kit"; > > + aliases { > + ethernet0 = &emac1; > + }; > + > chosen { > }; This should be added to the board DTS (microchip-mpfs-icicle-kit.dts) instead. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node 2021-07-16 9:23 ` Geert Uytterhoeven @ 2021-07-16 10:14 ` Bin Meng 2021-07-16 11:34 ` Geert Uytterhoeven 0 siblings, 1 reply; 11+ messages in thread From: Bin Meng @ 2021-07-16 10:14 UTC (permalink / raw) To: Geert Uytterhoeven Cc: Palmer Dabbelt, Lewis Hanly, Atish Patra, Linux Kernel Mailing List, linux-riscv, Bin Meng Hi Geert, On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Hi Bing, > > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote: > > From: Bin Meng <bin.meng@windriver.com> > > > > U-Boot expects this alias to be in place in order to fix up the mac > > address of the ethernet node. > > > > Note on the Icicle Kit board, currently only emac1 is enabled so it > > becomes the 'ethernet0'. > > > > Signed-off-by: Bin Meng <bin.meng@windriver.com> > > Thanks for your patch! Thanks for the review! > > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > > @@ -9,6 +9,10 @@ / { > > model = "Microchip MPFS Icicle Kit"; > > compatible = "microchip,mpfs-icicle-kit"; > > > > + aliases { > > + ethernet0 = &emac1; > > + }; > > + > > chosen { > > }; > > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts) > instead. I was wondering the same thing before doing this, but when I checked all other DTS in arch/riscv/boot I found the aliases node is put in the SoC dtsi file instead of the board on so I think that's the convention. Regards, Bin _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node 2021-07-16 10:14 ` Bin Meng @ 2021-07-16 11:34 ` Geert Uytterhoeven 2021-08-04 3:55 ` Palmer Dabbelt 0 siblings, 1 reply; 11+ messages in thread From: Geert Uytterhoeven @ 2021-07-16 11:34 UTC (permalink / raw) To: Bin Meng Cc: Palmer Dabbelt, Lewis Hanly, Atish Patra, Linux Kernel Mailing List, linux-riscv, Bin Meng Hi Bin, On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote: > On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote: > > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > > > @@ -9,6 +9,10 @@ / { > > > model = "Microchip MPFS Icicle Kit"; > > > compatible = "microchip,mpfs-icicle-kit"; > > > > > > + aliases { > > > + ethernet0 = &emac1; > > > + }; > > > + > > > chosen { > > > }; > > > > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts) > > instead. > > I was wondering the same thing before doing this, but when I checked > all other DTS in arch/riscv/boot I found the aliases node is put in > the SoC dtsi file instead of the board on so I think that's the > convention. The numbering of the aliases is supposed to match the labels on the board, hence it is board-specific, not SoC-specific. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node 2021-07-16 11:34 ` Geert Uytterhoeven @ 2021-08-04 3:55 ` Palmer Dabbelt 2021-08-04 3:55 ` Bin Meng 0 siblings, 1 reply; 11+ messages in thread From: Palmer Dabbelt @ 2021-08-04 3:55 UTC (permalink / raw) To: geert Cc: bmeng.cn, lewis.hanly, Atish Patra, linux-kernel, linux-riscv, bin.meng On Fri, 16 Jul 2021 04:34:02 PDT (-0700), geert@linux-m68k.org wrote: > Hi Bin, > > On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote: >> On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: >> > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote: >> > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi >> > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi >> > > @@ -9,6 +9,10 @@ / { >> > > model = "Microchip MPFS Icicle Kit"; >> > > compatible = "microchip,mpfs-icicle-kit"; >> > > >> > > + aliases { >> > > + ethernet0 = &emac1; >> > > + }; >> > > + >> > > chosen { >> > > }; >> > >> > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts) >> > instead. >> >> I was wondering the same thing before doing this, but when I checked >> all other DTS in arch/riscv/boot I found the aliases node is put in >> the SoC dtsi file instead of the board on so I think that's the >> convention. > > The numbering of the aliases is supposed to match the labels on the > board, hence it is board-specific, not SoC-specific. > > Gr{oetje,eeting}s, > > Geert I don't see a v2 of this. _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node 2021-08-04 3:55 ` Palmer Dabbelt @ 2021-08-04 3:55 ` Bin Meng 2021-08-04 4:18 ` Palmer Dabbelt 0 siblings, 1 reply; 11+ messages in thread From: Bin Meng @ 2021-08-04 3:55 UTC (permalink / raw) To: Palmer Dabbelt Cc: Geert Uytterhoeven, Lewis Hanly, Atish Patra, linux-kernel, linux-riscv, Bin Meng On Wed, Aug 4, 2021 at 11:55 AM Palmer Dabbelt <palmer@dabbelt.com> wrote: > > On Fri, 16 Jul 2021 04:34:02 PDT (-0700), geert@linux-m68k.org wrote: > > Hi Bin, > > > > On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote: > >> On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > >> > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote: > >> > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > >> > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > >> > > @@ -9,6 +9,10 @@ / { > >> > > model = "Microchip MPFS Icicle Kit"; > >> > > compatible = "microchip,mpfs-icicle-kit"; > >> > > > >> > > + aliases { > >> > > + ethernet0 = &emac1; > >> > > + }; > >> > > + > >> > > chosen { > >> > > }; > >> > > >> > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts) > >> > instead. > >> > >> I was wondering the same thing before doing this, but when I checked > >> all other DTS in arch/riscv/boot I found the aliases node is put in > >> the SoC dtsi file instead of the board on so I think that's the > >> convention. > > > > The numbering of the aliases is supposed to match the labels on the > > board, hence it is board-specific, not SoC-specific. > > > > Gr{oetje,eeting}s, > > > > Geert > > I don't see a v2 of this. Will send v2 soon. Regards, Bin _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node 2021-08-04 3:55 ` Bin Meng @ 2021-08-04 4:18 ` Palmer Dabbelt 0 siblings, 0 replies; 11+ messages in thread From: Palmer Dabbelt @ 2021-08-04 4:18 UTC (permalink / raw) To: bmeng.cn Cc: geert, lewis.hanly, Atish Patra, linux-kernel, linux-riscv, bin.meng On Tue, 03 Aug 2021 20:55:56 PDT (-0700), bmeng.cn@gmail.com wrote: > On Wed, Aug 4, 2021 at 11:55 AM Palmer Dabbelt <palmer@dabbelt.com> wrote: >> >> On Fri, 16 Jul 2021 04:34:02 PDT (-0700), geert@linux-m68k.org wrote: >> > Hi Bin, >> > >> > On Fri, Jul 16, 2021 at 12:14 PM Bin Meng <bmeng.cn@gmail.com> wrote: >> >> On Fri, Jul 16, 2021 at 5:23 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: >> >> > On Fri, Jul 2, 2021 at 3:44 AM Bin Meng <bmeng.cn@gmail.com> wrote: >> >> > > --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi >> >> > > +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi >> >> > > @@ -9,6 +9,10 @@ / { >> >> > > model = "Microchip MPFS Icicle Kit"; >> >> > > compatible = "microchip,mpfs-icicle-kit"; >> >> > > >> >> > > + aliases { >> >> > > + ethernet0 = &emac1; >> >> > > + }; >> >> > > + >> >> > > chosen { >> >> > > }; >> >> > >> >> > This should be added to the board DTS (microchip-mpfs-icicle-kit.dts) >> >> > instead. >> >> >> >> I was wondering the same thing before doing this, but when I checked >> >> all other DTS in arch/riscv/boot I found the aliases node is put in >> >> the SoC dtsi file instead of the board on so I think that's the >> >> convention. >> > >> > The numbering of the aliases is supposed to match the labels on the >> > board, hence it is board-specific, not SoC-specific. >> > >> > Gr{oetje,eeting}s, >> > >> > Geert >> >> I don't see a v2 of this. > > Will send v2 soon. Thanks. I'm assuming you're going to send both patches. _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 2021-07-02 1:43 [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 Bin Meng 2021-07-02 1:43 ` [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node Bin Meng @ 2021-07-08 13:40 ` Bin Meng 2021-07-09 9:20 ` Conor.Dooley 1 sibling, 1 reply; 11+ messages in thread From: Bin Meng @ 2021-07-08 13:40 UTC (permalink / raw) To: Palmer Dabbelt, Lewis Hanly, Atish Patra, linux-kernel, linux-riscv Cc: Bin Meng On Fri, Jul 2, 2021 at 9:42 AM Bin Meng <bmeng.cn@gmail.com> wrote: > > From: Bin Meng <bin.meng@windriver.com> > > Per the DT spec, 'local-mac-address' is used to specify MAC address > that was assigned to the network device, while 'mac-address' is used > to specify the MAC address that was last used by the boot program, > and shall be used only if the value differs from 'local-mac-address' > property value. > > Signed-off-by: Bin Meng <bin.meng@windriver.com> > --- > > arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > Ping? _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 2021-07-08 13:40 ` [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 Bin Meng @ 2021-07-09 9:20 ` Conor.Dooley 0 siblings, 0 replies; 11+ messages in thread From: Conor.Dooley @ 2021-07-09 9:20 UTC (permalink / raw) To: bmeng.cn, palmer, Lewis.Hanly, atish.patra, linux-kernel, linux-riscv Cc: bin.meng On 08/07/2021 14:40, Bin Meng wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > On Fri, Jul 2, 2021 at 9:42 AM Bin Meng<bmeng.cn@gmail.com> wrote: >> From: Bin Meng<bin.meng@windriver.com> >> >> Per the DT spec, 'local-mac-address' is used to specify MAC address >> that was assigned to the network device, while 'mac-address' is used >> to specify the MAC address that was last used by the boot program, >> and shall be used only if the value differs from 'local-mac-address' >> property value. >> >> Signed-off-by: Bin Meng<bin.meng@windriver.com> >> --- >> >> arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> > Ping? Yeah, thats fine. Reviewed-by: conor dooley <conor.dooley@microchip.com> > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2021-08-04 4:18 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-07-02 1:43 [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 Bin Meng 2021-07-02 1:43 ` [PATCH 2/2] riscv: dts: microchip: Add ethernet0 to the aliases node Bin Meng 2021-07-09 10:06 ` Conor.Dooley 2021-07-16 9:23 ` Geert Uytterhoeven 2021-07-16 10:14 ` Bin Meng 2021-07-16 11:34 ` Geert Uytterhoeven 2021-08-04 3:55 ` Palmer Dabbelt 2021-08-04 3:55 ` Bin Meng 2021-08-04 4:18 ` Palmer Dabbelt 2021-07-08 13:40 ` [PATCH 1/2] riscv: dts: microchip: Use 'local-mac-address' for emac1 Bin Meng 2021-07-09 9:20 ` Conor.Dooley
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox