[PATCH v10 11/24] dt-bindings: Add RPMI system MSI message proxy bindings

[Anup Patel <apatel@ventanamicro.com>]

Add device tree bindings for the RPMI system MSI service group
based message proxy implemented by the SBI implementation (machine
mode firmware or hypervisor).

The RPMI system MSI service group is defined by the RISC-V
platform management interface (RPMI) specification.

Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 .../riscv,rpmi-mpxy-system-msi.yaml           | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,rpmi-mpxy-system-msi.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,rpmi-mpxy-system-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,rpmi-mpxy-system-msi.yaml
new file mode 100644
index 000000000000..1991f5c7446a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,rpmi-mpxy-system-msi.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,rpmi-mpxy-system-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V RPMI system MSI service group based message proxy
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V Platform Management Interface (RPMI) [1] defines a
+  messaging protocol which is modular and extensible. The supervisor
+  software can send/receive RPMI messages via SBI MPXY extension [2]
+  or some dedicated supervisor-mode RPMI transport.
+
+  The RPMI specification [1] defines system MSI service group which
+  allow application processors to receive MSIs upon system events
+  such as P2A doorbell, graceful shutdown/reboot request, CPU hotplug
+  event, memory hotplug event, etc from the platform microcontroller.
+  The SBI implementation (machine mode firmware or hypervisor) can
+  implement an SBI MPXY channel to allow RPMI system MSI service
+  group access to the supervisor software.
+
+  ===========================================
+  References
+  ===========================================
+
+  [1] RISC-V Platform Management Interface (RPMI) v1.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-rpmi/releases
+
+  [2] RISC-V Supervisor Binary Interface (SBI) v3.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-sbi-doc/releases
+
+properties:
+  compatible:
+    description:
+      Intended for use by the SBI implementation.
+    const: riscv,rpmi-mpxy-system-msi
+
+  mboxes:
+    maxItems: 1
+    description:
+      Mailbox channel of the underlying RPMI transport.
+
+  riscv,sbi-mpxy-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The SBI MPXY channel id to be used for providing RPMI access to
+      the supervisor software.
+
+required:
+  - compatible
+  - mboxes
+  - riscv,sbi-mpxy-channel-id
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "riscv,rpmi-mpxy-system-msi";
+        mboxes = <&rpmi_shmem_mbox 0x2>;
+        riscv,sbi-mpxy-channel-id = <0x2000>;
+    };
+...
-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv